7-Way Extension to Use with 41 inch Hitch Extender

Question

Question:

Wat electrical connection do yo recommend for the cut-down 41inch version of this hotch extender?

asked by: Dave M

0

Expert Reply:

We have the Torklift 7-way extender part # TLW6042 which is 42 inches long and would work well with the hitch extender # RP45018.

expert reply by: Jameson C

0

Answer 1

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 2

To replace the air springs on your 2017 Ram 2500 it would require changing the kit. The Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers #AL88289 are different than the Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle Item…

view full answer...

Answer 3

The air bag kit I recommend for a 2019 Ram 2500 is the Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57589. This kit offers a bolt-on install and is compatible with in-bed hitches. I have attached an install video I did below. It comes with…

view full answer...

Answer 4

Since the 7-way round pin plug is obsolete, your best bet would be to replace the connector on your camper with the common 7-way blade style connector. You'd remove the existing plug on your slide in camper, and replace it with #A7WCB. You could…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

You can use a hitch extension but it will reduce your trailer hitch tongue weight capacity by 50 percent. We don't have a 2 inch hitch extension compatible, so I recommend a 2-1/2 inch hitch for your truck and get the Titan Hitch Box Extension…

view full answer...

Answer 7

It sounds like you want to install the TorkLift SuperHitch Magnum #TL74FR on your 2023 Silverado 3500 and then add a TorkLift extension. Regarding the installation of the hitch, standard tools along with a floor jack and torque wrench capable of 140…

view full answer...

Answer 8

The TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL74FR for your 2020 Chevrolet Silverado 3500 weighs 162lbs.

view full answer...

Answer 9

The 48 inches of length that the TorkLift Wiring Harness Extension #TLW6042 has is the distance from end to end including the connectors.

view full answer...

Answer 10

The correct Torklift SuperHitch magnum trailer hitch receiver for your 2021 Chevrolet Silverado 2500HD with the 6-3/4' bed is the #TL74FR. This hitch has a 2500lb tongue weight rating and a 20000lb trailer weight rating or a 3000lb tongue weight…

view full answer...

Answer 11

You could cut and resplice the #TLW6532 7-way wiring harness extension to shorten it, but I'd personally be leery about that as the splices could possibly be vulnerable to the elements and corrosion. The best practice would be to get a harness in…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

7-Way Extension to Use with 41 inch Hitch Extender

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching