Hopkins Endurance Easy-Pull 4-Flat Extension w/ 1 Grip Ring - Vehicle and Trailer Ends - 12"
(18 reviews)
Price: $11.24
In Stock
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 1 Grip Ring - Vehicle and Trailer Ends - 12"
Item # HM48144
Retail:$27.75
Our Price: $11.24
You Save: 59%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (18)
- Q & A (0)
- Photos
Hopkins Trailer Wiring - HM48144
- Wiring Adapters
- Single-Function Adapter
- 4 Flat
- Plug and Lead
- 0 - 5 Feet Long
- 4 Flat
- Hopkins
Increase the length of your 4-way flat connection by 12" with this extension loop. Large grip ring on trailer end provides maximum leverage when disconnecting. Plugs into your existing 4-way flat connectors.
Features:
- 4-Way flat extension loop increases the length of your wiring connection by 12"
- Plugs into the 4-way flat connectors on your vehicle and trailer
- Easy-to-pull ring on trailer end makes 4-way easy to disconnect
- Ring handle makes it easy to pull connector straight back for proper leverage
- No wiggling plugs or damaging terminals
- Wide handle makes it easy to grip connector
- Ring handle makes it easy to pull connector straight back for proper leverage
- Corrosion-resistant terminals are long-lasting
- Comes with 1 dust cap and a terminal grease packet for electrical connections
Specs:
- Ring inner diameter: 1"
- Ring outer diameter: 1-7/8"
- Wiring harness length: 12"
- Wire configuration:
- White: ground wire
- Yellow: left turn/brake light
- Green: right turn/brake light
- Brown: tail lights
- 3-Year limited warranty
Easy-Pull Ring Handle Is Easy to Grip and Pull
Standard 4-way flat plugs have a small surface area to grip when you are pulling them apart, forcing you to wriggle the plugs back and forth to loosen them. Some users even pull on the wires. This can lead to broken terminals or ripped wiring. With the Easy-Pull extension loop, the plug has a large grip ring designed to make disconnecting a snap. Simply slide your finger into the ring and pull the plug away from the opposite plug to disconnect.
The Easy-Pull is also available as a vehicle-end 4-way flat plug. Combine the Easy-Pull trailer-end plug on this harness with the vehicle-end plug, and you'll get the easiest possible disconnection. With ring handles on both connectors, disconnecting is as simple as gripping the rings and pulling straight apart. No wriggling, no broken terminals, and no damaged wires.
48144 Hopkins Easy Pull 4-Pole Flat Extension Loop - Trailer End Ring Handle - 1' Long
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 1 Grip Ring - Vehicle and Trailer Ends - 12" - HM48144
Average Customer Rating: 4.7 out of 5 stars (18 Customer Reviews)
Increase the length of your 4-way flat connection by 12" with this extension loop. Large grip ring on trailer end provides maximum leverage when disconnecting. Plugs into your existing 4-way flat connectors.by: Joe 04/20/2024
Great product great service!
by: JKS12/06/2020
The wiring on one of my trailers was a little tight.
This is a great wiring extender.
The ring is easy to grab especially if hook-up is a bit inconvienent.
by: Robert 09/17/2023
Just what I needed. Good quality.
by: Gary Wilson08/03/2017
The extended terminals with the ring for a grip is especially helpful when using with a newer pickup plug.
With the standard trailer wiring my thumb leaks blood every time I unhook. I purchesed this to cut down on my need for band aids.
Gary W.
8/6/2018
Still working great. I wouldnt trade for them.
by: Rusty04/16/2022
Works great. Exacty what I need. Being 68 yrs old it makes connecting and disconnecting my trailer connection alot easier for me. Being a customer for a few years now, I know I can always find what I need with etrailer.
by: Dan04/10/2018
It worked great, easier to disconnect from my truck.
by: Kit 05/18/2020
Another easy item, plug and play! Nice job etrailer! You have always done a great job!
by: Dave 09/15/2021
Speedy and courteous service! I was extremely pleased wit all parts of the transaction!
by: Gary09/22/2022
works very well
by: Greg H06/04/2020
Good quality product. Removed one star because the cover likes to come off on its own sometimes.
by: Tim12/17/2018
Easy install and just what I needed. < br>
by: Brian12/26/2018
Always satisfied with your Products an customer service..
by: Robert02/11/2022
Does exactly what I wanted.
by: Michael 12/12/2023
by: Cory02/14/2021
by: David 06/19/2021
by: Mike02/28/2021
by: David 01/22/2023
18
18
See what our Experts say about this Hopkins Trailer Wiring
- Availability of 4-Way to 4-Way Extension HarnessWe do have 4-way to 4-way extensions in a few sizes. Like with the part # HM47114 for 48 inches, part # HM47004 for 24 inches or part # HM48144 for 12 inches. We also have 6 foot part # RM-300150-00.
view full answer... - Is Wire Size on a 4-Way Large Enough for 12 Volt Power to Charge a BatteryBasically, yes and no. Given the short distance from the front of the vehicle to the battery the small gauge wire on # HM48144 would more than likely be able to handle the amperage running through it. But the greater the distance the less amperage it can handle. The problem you will run into using 4-Ways is the small wire gauge. As an alternative what about using some winch wiring and connectors, # BDW20306. The connectors aren't much larger than a 4-Way and the wire gauge on these is...
view full answer... - Trailer Connector Extension to Make it Easier to Plug in Trailer to 2014 GMC TruckTo make it easier to reach the 4-way connector on your 2014 GMC we have a 4-way trailer connector extension by Hopkins that's 1 foot long, # HM48144, or 2 feet long, # HM47004. Both of them plug into the existing 4-way and just extend it further out from under your truck's bumper. You can leave the extension plugged into the truck and use the included terminal grease to help protect it.
view full answer... - Best 4-Way Wiring for a 2022 Toyota Tacoma Using a Cargo Carrier with Lights and a Small TrailerFor your 2022 Toyota Tacoma I recommend the Curt T-Connector Vehicle Wiring Harness # C56349. This wiring harness will provide you with the 4-way connector you are needing and has the highest amp capacity. This custom-fit harness connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-Connector, run the hot lead up...
view full answer... - Is There a Way To Store 4-Way Inside 2020 Chrysler PacificaNormally the Tekonsha trailer wiring harness part # 118723 is stored outside of the vehicle like you mentioned. In order to store it in the interior of the vehicle you'd need to find a grommet in the truck floor (if present) and route the 4-way through it so that it could stay inside away from the weather. Since this isn't how this was designed to be used/installed there's a chance the harness wouldn't be long enough. If this is the case we have extensions like the part # HM48144 which...
view full answer... - Solution For Trailer Wiring Coming Unplugged On Sharp TurnsThe shortest ball mount available for your application is the Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop # C45534. This is class 3 and rated 7,500lbs max towing capacity. It measures 7-1/2" from center of hitch pin hole to center of ball hole. If this is not short enough, then you will want to just go with a trailer cord extension which is a safer route anyways. If you have a 4 way flat trailer plug then go with Hopkins Endurance Easy-Pull 4-Flat Extension #...
view full answer... - Recommended 4-Way Wiring Kit for 2020 Toyota Tacoma and Cargo Carrier/TrailerThe 4-Way flat connector that I recommend for your 2020 Toyota Tacoma is the Curt T-Connector # C56349. Then, depending on what you have on your Tacoma you might also want to check out the Mounting Bracket # 18144 as well as a no-drill bracket like part # 18140 or # 18136 so you have easy access to the connector. If you don't already have a light kit for your Reese Cargo Carrier # 63153 I recommend the Light Kit # 20174 along with the 12" Extension # HM48144 to ensure that you can connect...
view full answer... - What Lengths Are The 4-way Flat Extension Harnesses Available In?It sounds like you are looking for a 4-way flat extension harness. I recommend the Hopkins Endurance Easy-Pull 4-Flat Extension 12" # HM48144. 24" # HM47004, or 48" # HM47114. These extensions will plug into the 4-way flat connector on your tow vehicle and the connector on your trailer and have an easy pull finger loop to make disconnecting the harness even easier. If this is not the extension you meant just let me know. I included videos for the products mentioned for you to take a look at.
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Shane H
Written by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James S.
12/6/2021
One year and product still works like a charm.