Solution For Trailer Wiring Coming Unplugged On Sharp Turns
Question:
Hi, I need to replace a ball mount with a Class III Ball Mount with 2 Ball - 2 - 5,000 to 7,500 lbs for my 17 Toyota 4Runner. However, I would like to shorten the length of the protrusion from the hitch to the ball. Currently, I have a 3 inch gap from the hitch to the lip of the mount. I would like to get a mount that is shorter, if not completely flush against the hitch. I have a shorter than normal trailer power cord that tends to pull loose when I make a right turn. Thanks!
asked by: Gerald A
Expert Reply:
The shortest ball mount available for your application is the Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop # C45534. This is class 3 and rated 7,500lbs max towing capacity. It measures 7-1/2" from center of hitch pin hole to center of ball hole. If this is not short enough, then you will want to just go with a trailer cord extension which is a safer route anyways.
If you have a 4 way flat trailer plug then go with Hopkins Endurance Easy-Pull 4-Flat Extension # HM48144 for 12 inch extension or Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings # HM47114 for 48" extension. If you have a 7 way trailer plug then I recommend going with Curt Universal 5th Wheel/Gooseneck 7-Way Extension # C56080. This is 7 feet long and can be mounted on your trailer tongue using Curt Mounting Bracket # C67UR.
I have attached demonstration videos for you.
Products Referenced in This Question
Curt Universal 5th Wheel/Gooseneck 7-Way Extension - 7' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7 Feet Long
- Universal Fit
- 7 Round - Blade
- CURT
more information >
Curt Mounting Bracket for 7-Way Connector Plug
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- CURT
more information >
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48"
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 1 Grip Ring - Vehicle and Trailer Ends - 12"
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Q&A: What is the Best Hitch for a 2024 Subaru Outback?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Rooftop Cargo Carriers
- Q&A: Recommended Hitch for a 2024 Mistsubishi Outlander PHEV
- Q&A: Recommended Hitch and 7-Way Connector for a 2024 Subaru Outback
- Q&A: Recommended Wiring Harness for a 2024 Honda Pilot