Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This waterproof identification light bar with 3 incandescent lights is 14-1/4" long and designed for trailers wider than 80". Durable stainless steel base. Surface mount to trailer - hardware not included. Single wire plug-n-go connection.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the 3-Light Incandescent Identification Light Bar for trailers that are over 80 inches wide. Now this clear incandescent light strip will function as an identification light bar for trailers that are wider than 80 inches. This light bar has three clear lights attached to the space. It is durable polycarbonate housing and lens that the bulbs are in, and they are sonically sealed waterproof housing lens which makes it submersible.
It is three heavy-duty long-life incandescent bulbs that produce a nice white light, and the base on it is a polished stainless steel base to ensure long lasting use. Now, I do have this hooked up to some power. All I have to do is ground it, and this light grounds by when you put your screws in it to mount it. That's where it'll ground at. So I'm just gonna show you that if I touch the base, you can see how the light comes on.
The incandescent lights are lit up. I'm gonna go ahead and turn off there. And you can see how bright the light is. Now this is compatible with 12 volt DC systems. We'll go ahead and turn back on our overhead light.
It does mount to the surface of the trailer with these mounting holes right here. Now the hardwood installer is not included. You would have to supply that. And, if you look, the wire on the end, it is a single wire design, has a Plug-N-Go molded male plug for watertight connection to your electrical harness. A few specs on this.
I want to give you the length of the light bar from this end to this end. So if we put a ruler on it, you'll see this light's gonna be right about 14 1/4 inches long. And the width on it is right about 1 3/16 inches. And the total depth of the ball to the base, it's about 1 1/8 inches. Now the distance between these mounting holes. There's one here and one right here. If we go center to center, it is right about 8 1/2 inches. Now the power draw at 12.8 volts on this light bar is one amp. But that should do it for the review on this 3-Light Incandescent Identification Light Bar for trailers over 80 inches wide.
Average Customer Rating: 5.0 out of 5 stars (15 Customer Reviews)
This waterproof identification light bar with 3 incandescent lights is 14-1/4" long and designed for trailers wider than 80". Durable stainless steel base. Surface mount to trailer - hardware not included. Single wire plug-n-go connection.Very fast affordable shipping with competitive pricing. Actually they were the omly place online with the part I needed too. Thank you
The light bar was exactly what I needed to mount behind the back lit brand name plate for my boat on each side of my boat trailer. Quick shipping and easy installation was great! Thanks etrailer.com!
I have had this product for over a year without any issue. Customer service is great. Got my part in a timely manner. Would definitely recommend using them.
Using this product for a boat trailer. Fits under side step to light up cut out lettering in trailer. Perfect fit and wiring plugged into existing wiring. Very easy install. Etrailer.com is as easy as it gets for finding your product and ordering.
Right light for my trailer with the correct connectors attached. Just install with original fasteners, plug in and your done. Nothing like OEM parts delivered to your door with great customer service from the time you place your order to delivery of the product to your door. Great communication!
The people at etrailer found a part for my boat trailer that i had a hard time finding. Really patient and professional. I will definately go back to them for my trailer parts. I would recommend them.
Exactly what I needed to replace the backlight on my Bryant 232 boat trailer logo, just like a previous poster. I think it was the exact replacement for what they used in the factory in 2005.
Exact replacement for an early 2000 Javelin boat trailer.
Fast shipping, item as described and perfect replacement for OEM parts!!
Exactly as I ordered. Fit perfectly.
Wayne F.
9/4/2021
Easy to install and after a year still works as advertised. Good quality.
Still works
Lights appear to be good quality.
good quality ,right price, good service
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill
2/14/2024
The lights are still working.