Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads - 12-24 Volts - Less than 0.3 Amp - 97 dB
(11 reviews)
Price: $33.23
In Stock
Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads - 12-24 Volts - Less than 0.3 Amp - 97 dB
Item # PK41820
Retail:$44.91
Our Price: $33.23
You Save: 26%
In Stock
- All Info
- Reviews (11)
- Q & A (0)
- Photos
Pollak Back Up Alarm - PK41820
- Low Volume
- 12V
- 24V
- 97 Decibels
- Pollak
- Surface Mount
- Steam-Cleanable
- Voltage Spike-Protected
Rugged, compact, light- to medium-duty back-up alarm replaces large and bulky alarms currently used on light- and medium-duty trucks, dump trucks, motor homes, campers, electric forklifts, and other similar applications. 97dB single sound level.
Features:
- Compact size allows for horizontal or vertical mounting in protected areas
- Rugged, glass-filled nylon housing
- Steam-cleanable or pressure-washable
- Can be used on positive- and negative-ground vehicles
- Voltage spike-protected
- Reverse polarity-protected
- Solid-state electronics
- Conforms to SAE J994 type C
- Meets state, federal, and US Army Corps of Engineers' requirements
- Meets all European standards for on- and off-road vehicles (CE & E-Mark certified)
- Drilling required for installation
- Must be mounted approximately 4' off the ground
- Minimum of 18-gauge wire to complete installation to the fused back-up lamp circuit
- Mounting hardware sold separately
Specs:
- Applications: light- and medium-duty trucks, dump trucks, motor homes, campers, electric forklifts, and other similar vehicles
- Dimensions: 4" wide x 1.25" deep x 2.5" tall
- Mounting: (4) 0.5" long x 0.25" wide slots on 3.25" centers
- Sound level: 97dB(A) +/- 4 @ 4'
- Voltage: 12 to 24 volts
- Current draw: less than 0.3 amp
- 1-Year limited warranty
41-820V Light Duty to Medium Duty Backup Alarm with Wire Leads - 12 to 24 Volts - Less than 0.3 Ampere - 97 Decibels
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads - 12-24 Volts - Less than 0.3 Amp - 97 dB - PK41820
Average Customer Rating: 5.0 out of 5 stars (11 Customer Reviews)
Rugged, compact, light- to medium-duty back-up alarm replaces large and bulky alarms currently used on light- and medium-duty trucks, dump trucks, motor homes, campers, electric forklifts, and other similar applications. 97dB single sound level.by: John P10/22/2017
Good Product. I purchase my electric brake control system a few years ago from e trailer and everything works fine on my complete battery to hitch custom install. I needed a pound back up alarm for an industrial work site but did not want to wake the neighbours up each morning so talked to the folks at e trailer and we picked some components to make a removable unit that slides into my reliever and plugs into my 7 way RV plug. Good job and thanks.
by: Malcolm 09/14/2019
I really like "etrailer" because they will answer my questions right away. They treat you very well. They have great "Customer Service" unlike some other companies. And all of the products I've gotten from this company are well made, were shipped on time. And I'll get more things from them as I need them.
by: John N. 08/27/2014
Good afternoon,
The product was an easy installation and works very well. 97 decibels is plenty loud. Thank you, John
by: Bob T10/07/2014
Great product. Easily installed within 30 minutes. Loud enough to wake the chickens. Provides the warning to pedestrians that I was looking for. Thanks!!!!
by: Dale 05/18/2021
Works every time.
by: Patrick12/03/2014
Excellent quality product - item packed very well, item arrived intact and earlier than expected. Easy to install.
by: Brandon12/08/2017
Worked as it should.
by: Andy04/10/2018
Installed with no issues and works grea t.
by: Wicked Warnings LLC 07/12/2019
Nicky K is my favorite employee....shes the BEST!.
by: Jaden12/20/2021
by: Ronald 04/12/2023
11
11
See what our Experts say about this Pollak Back Up Alarm
- Recommended Reverse Alarm And LED Lights For 2000 Toyota Land CruiserUnfortunately we don't have the LED reverse light with beeper for your 2000 Toyota Land Cruiser, but I do have a solution for you. For a reverse alarm, I recommend Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads # PK41820. This will give you the reverse alarm function, and you can use the 7440 LED Lights- White - 2 Pack # 74402-S24SMD-CW for your white LED lights.
view full answer... - Replacement 921 Bulb with Backup Alarm for 2017 Ram 2500I may have a solution for you, however we do not currently have a combination reverse 921 light bulb and back up alarm available. We are not aware of when one might become available. We do have the stand alone Pollak Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads # PK41820. This will install on the underside of your truck and tap into the reverse light wire. I have attached a demonstration video on this product as well as a link that will take you to our available selection of...
view full answer... - Backup Alarm for a 2008 Toyota HighlanderThe reverse lights on your 2008 Toyota Highlander use a 921 bulb so backup alert # HM20100VA is not going to fit but I do have an excellent solution for you. You can use backup alarm # PK41820. It mounts under the vehicle and wires into a reverse light circuit. When the vehicle is placed in reverse you will get a nice and loud 97 decibel alert.
view full answer... - What Vehicles Does the Hopkins Backup Alert # HM20101VA FitThe Hopkins Backup Alert # HM20101VA fits in place of a 3156 bulb. The 2007 and 2008 Chevy Impala use a 921 so it will not fit. The 2007 and 2008 Chevy Uplander use a 3157 so it will not work properly though it will fit the socket. The 2002 Chevy Silverado uses an 1156 so you would use # HM20100VA. The 2008 Chevy TrailBlazer uses a 3157 so it will not work properly though it will fit the socket. The 2007 Ford F-150 uses a 3156 so you can use # HM20101VA. The 2007 Toyota Camry uses a 921...
view full answer... - Will Hopkins Backup Alert # HM20101VA Fit 2016 Subaru Forester I took a look at the online version of the owner's manual for your 2016 Subaru Forester and it lists a 16W watt W16W bulb for its backup light. This type of bulb can also be interchanged with a 921 bulb which is a bit more common. The Hopkins Backup Alert # HM20101VA that you referenced will only replace a 3156 bulb so it will not work on your Forester. I may have a solution for you but we do not have a backup alert available that will replace the W16W/921 bulb on your vehicle. What...
view full answer... - Back-Up Alarm for a 2016 Ram 1500The Hopkins Backup Alert Replacement Bulbs like part # HM20101VA are only offered for 3156 and 1156 type bulbs. The 2016 Ram 1500 uses a 621 type bulb therefore there is not a Hopkins Backup Alert Replacement Bulb compatible. However, you could just use a standard back-up alarm like the Light-Duty to Medium-Duty Back-Up Alarm part # PK41820 without issue but this is really your only option. The Light-Duty to Medium-Duty Back-Up Alarm has a simple two wire installation so this is something...
view full answer... - Backup Alarm Recommendation for a 2008 Jeep PatriotThe reverse light bulb type for the 2008 Jeep Patriot is a 921 wedge type bulb. While there isn't a combination reverse light bulb and back up alarm in this size there are back up alarms available by themselves such as # PK41820. You can mount one on the underside, rear of the vehicle and tap into a reverse light wire. I have also included a link to all of the back up alarms and sensors that we carry.
view full answer... - Backup Alarm for 2019 Dodge Grand Caravan Based on my research your 2019 Dodge Grand Caravan uses a 3157 bulb for its reverse light. The Hopkins Backup Alert # HM20101VA that you referenced is designed to replace a 3156 bulb, which will physically fit in place of your van's 3157 but may not function properly because of the difference in design. We do not have a similar replacement backup alert bulb that's designed for the 3157 type bulb so your best option will be with a separate backup alarm like the Pollak # PK41820 that can...
view full answer... - Back Up Alarm Recommendation for Vehicle with 921 Style Reverse LightI may have a solution for you, however we do not currently have a combination reverse 921 light bulb and back up alarm available. We are not aware of when one might become available. We do have the stand alone Pollak Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads # PK41820. This will install on the underside of your truck and tap into the reverse light wire. I have attached a demonstration video on this product as well as a link that will take you to our available selection of...
view full answer... - Backup Alarm for a 2015 Chevy Silverado 1500I do have some options for you but Hopkins Backup Alert # HM20101VA actually will not fit your 2015 Chevy Silverado 1500 due to the type of bulbs your truck uses for the reverse lights. What you can use is a stand alone backup alarm that will wire into a reverse light wire such as # PK41820. You can mount it pretty much anywhere under the truck. The power wire will splice into a reverse light wire and the other wire can ground to the frame. I have linked a video featuring this product for you.
view full answer... - Backup Alarm Recommendation For 2010 Toyota Tacoma The reverse light bulb type for the 2010 Toyota Tacoma is a 921 wedge type bulb. While there isn't a combination reverse light bulb and back up alarm in this size there are back up alarms available by themselves such as # PK41820. You can mount one on the underside, rear of the vehicle and tap into a reverse light wire. I have also included a link to all of the back up alarms and sensors that we carry.
view full answer... - How Loud is Hopkins Backup Alert for 3156 BulbsThe back up alert and replacement reverse light bulb # HM20101VA is going to be less than 97 decibels. The overall sound will vary depending on the vehicle it is installed on since the light housings are different on all vehicles. But no matter what vehicle it is installed on you should be able to hear it without issue. If you want something louder I recommend back up alarm # PK41820. It is rated for 97 decibels and you will be able to hear it better since you can mount it under the vehicle....
view full answer... - Backup Alarm for a 2013 Ford C-MaxThe W16W indicates a 16 watt bulb and also is synonymous with a 921 bulb. So in other words, W16W and 921 are the same thing. We do not have a backup alarm and replacement bulb that will fit in place of a W16W or 921 bulb. But I do have a solution for you. You could install a stand alone backup alarm, # PK41820. This will actually be louder than the replacement bulb types of alarms. It can mount underneath the vehicle and simply wires into a reverse light wire.
view full answer... - Backup Alarm Solution for Vehicle with 7440 Reverse LightEven though the 7440 and the 3156 are very similar they are not interchangeable. I wish we had a 7440 backup alarm but at this time we do not. While there isn't a combination reverse light bulb and back up alarm in this size there are back up alarms available by themselves such as # PK41820. You can mount one on the underside, rear of the vehicle and tap into a reverse light wire. I have also included a link to all of the back up alarms and sensors that we carry.
view full answer... - Does Surface Mount Back-up Alarm # BK97DB Include WiringThe wiring is not included with Surface Mount Back-up Alarm # BK97DB. We have others that do have wiring attached such as # PK41820, # RVS-W02, # PK41851, and # PK41822.
view full answer... - Fit of Hopkins # HM20101VA Replacement Reverse Lamp Bulb w/ Audible Alert on 2011 Chevy ExpressThe 2011 Chevy Express takes a 3157 dual filament bulb as the reverse lamp bulb. A single filament bulb like the 3156 one provided with the # HM20101VA would not work correctly. We do offer a reverse alarm, part # PK41820 that would wire directly into the reverse light circuit, that would sound every time the transmission is placed in reverse.
view full answer... - Does K-Source Back Up Camera KSVS-8 Include a Back Up AlarmI'm not sure what you mean by an alarm... The K-Source # KSVS-8 doesn't include anything that would beep as the vehicle is reversing but you could certainly add something like that if you wish. We carry several different reverse alarms that would sound a loud beep when the vehicle's shifted into reverse. I'd recommend part # PK41820, which has a 97 dB alarm. Installation would be simply, the alarm would mount behind the rear bumper somewhere with only two wires to install. The red wire...
view full answer... - Backup Alarm Needed for a 2018 Chrysler PacificaWe do have a few different options for you to add a backup alarm on your 2018 Chrysler Pacifica. You could either use the Hopkins Backup Alert # HM20101VA which plugs into your 4-Way flat connector and lights up as well as emits sound when you are backing up. Another option that doesn't involve utilizing a light is the Light-Duty to Medium-Duty Back-Up Alarm # PK41820. You will just need to ground the black wire and then run the red wire to your backup circuit. Some review articles have...
view full answer... - Recommended Back Up Alarm For A 2014 Chrysler Town and CountryFor your 2014 Chrysler Town And Country, I recommend either the Surface Mount Back-up Alarm - 97 DB # BK97DB you referenced or the Light-Duty to Medium-Duty Back-Up Alarm with Wire Leads - 12-24 Volts - Less than 0.3 Amp - 97 dB # PK41820. For either alarm, you can use the Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads # PK34513 and just splice the hot side of the switch into the reverse light wire and then run the cold side to the alarm. You can use the...
view full answer...
Do you have a question about this Back Up Alarm?
Info for this part was:
Video by:
Andrew K
Video by:
Joshua S
Video by:
Chris R
Expert Research:
Jameson C
Test Fit:
Nicholas E
Test Fit:
Shane T
Updated by:
Adele M
Written by:
Laura H
Video Edited:
Dustin K
Video Edited:
Sue W
Installed by:
Cole B
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.