Peterson Mounting Bracket for 4" Round Trailer Tail Lights - Bolt On - Weld On - Qty 1

Video Transcript for Review of Peterson - Trailer Lights - 426-09

Today we're gonna take a look at the Peterson Mounting Bracket for 435800 & LED-RT Round Trailer Lights. This is going to give you a nice mounting bracket to get your light mounted to your trailer. It's going to be made of a durable steel construction with a black powder coat finish.I have a light here to show how that's gonna look with our Peterson light. So the easiest way to get this in place is to put on the grommet first. It's going to hold the light at the back there. I'll hold the grommet, and then we can pop our light into the grommet from there.Now just kinda work your way around to get everything seated in properly.

There we go.So that'll be what it looks like with the light and grommet in place. It does need to have the grommet for that light to fit. And then, as you can see, we'll have our light at the back so we can get all our connections made there as well.These several holes around the back, so we can get this connected if we want to use some self-tapping screws. And then there'll also be some holes at the top.Now the distance between those two mounting holes is going to be 4" going center to center. Our bracket overall is gonna be about 5 3/4" long by 6" wide, and it's going to be about 1 1/2" deep.

With the light installed, it's gonna be a little bit deeper. It'll be more like 2 1/4".Now the light and grommet are sold separately, but you can find those here at etrailer.com. And that's gonna do it for our look at the Peterson Mounting Bracket for 435800 & LED-RT Round Trailer Lights.