LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Red Lens
(55 reviews)
Price: $20.61
In Stock
LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Red Lens
Item # MCL52RB
Our Price: $20.61
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (55)
- Q & A (0)
- Videos (1)
- Photos
Optronics Trailer Lights - MCL52RB
- Clearance Lights
- Round
- LED Light
- Red
- 2 Inch Diameter
- Recessed Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
2-15/16" Diameter round. Waterproof, LED trailer light serves as a side marker light and clearance light. Durable polycarbonate housing and lens. Flange mount to trailer. Accepts standard 2-prong plug. PC rated.
Features:
- Round LED trailer light functions as a clearnce light and side marker light when properly mounted
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Red lens over white LEDs
- Compatible with 12V DC systems
- Surface mounts to trailer with built-in flange
- Fits in a 2-1/4" diameter hole
- Accepts industry standard 2-prong plug (A46PB or A86PB - sold separately)
- DOT compliant
- PC rated
Specs:
- Dimensions: 2-15/16" diameter x 15/16" deep
- Distance between mounting holes (center on center): 2-1/4"
- Diodes: 5
- Power draw at 12.8V: 0.063 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
MCL52RB Optronics LED Clearance and Side Marker Trailer Light w/ Mounting Flange - Submersible - 5 Diodes - Round - Red Lens - PC Rated
Alternate part number: MCL-52RB
California residents: click here
Video of LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Red Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL52RB Review
Today were looking at the Optronics Sealed 2 inch round LED Trailer Clearance and Side Marker Light, part number MCL52RB. This is a sealed waterproof lens and housing. It conventionally accepts the industry standard 2 prong plug, which is required and sold separately. It's a 5 red LED light emitting diodes. It has a lifetime warranty on the LEDs.
The LED lights draw .221 amps on 12.8 volts. Lets go ahead and see what our light looks like when it's lit up. Supply a ground and a power to the back plugs on the light. Now we'll go ahead and shut off the lights so you can see what it looks like in the dark. And there you have it for our Optronics Sealed 2 inch round Trailer Light Clearance and Side Marker Light, part number MCL52RB.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Red Lens - MCL52RB
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
2-15/16" Diameter round. Waterproof, LED trailer light serves as a side marker light and clearance light. Durable polycarbonate housing and lens. Flange mount to trailer. Accepts standard 2-prong plug. PC rated.by: Junya03/21/2024
All the trailer lights were OEM and fit perfect
by: Jean 02/05/2024
Exact fit!
by: Jonathan 05/13/2023
Fits 2008 Ranger Bass boat
by: Cameron 05/19/2023
The exact light for a older Ranger boat
by: Daniel 01/08/2023
These Led lights worked great!
by: Mark03/11/2018
I was having trouble finding the correct marker light for my ranger boat trailer until I found etrailer . I ordered it on a Sunday and I accidentally doubled my order , I had a representative call me within the hour to check on the double order . When I explained that I did in fact place a double order the representative took care of it immediately. Very good customer service and I will definitely use them in the future
by: David 10/06/2022
It fits my Ranger boat trailer perfectly. Easy to hook up !
by: Paul M.10/17/2022
Exact Replacement for my Ranger Trail trailer. Received faster than expected.
Thank You!
by: Loren05/31/2019
I found the exact item that I needed from your extensive trailer inventory. Your company was the only place that I was able to locate this item. My order was shipped right after it was submitted.
by: Jeffrey 04/21/2023
Great people to work with!!!! Odelia was very helpful and courteous!!!
by: Eugene07/29/2018
Prompt delivery. Received much quicker than I was expecting.
Wish that a stainless trim ring was available for this light. So
far, I have not been able to find one.
by: Lee 09/15/2020
very hard to find i needed these for ranger bass boat trailer 2004, ranger is out of them, needed to solder wire but very easy job,
by: Edward 11/10/2022
The exact replacement part I needed and delivered quickly
by: Darrell05/11/2016
It's been one year since my company has purchased these light and they are still going strong
by: James 07/15/2021
Great Service, Fast and Easy ordering and Shipping. They carry everything you need for trailering at a Good Cost.
by: Mike 09/14/2020
Just what I needed to replace 2 factory clearance lights on my Ranger boat trailer. Fit perfectly.
by: Mark04/23/2018
as described. fast delivery. ordering another light from them as soon as it stops raining.
by: Trent R.07/02/2014
The wrong type were sent. I needed the ones for the rubber grommet.
by: Mark W10/16/2017
Exact replacement for Ranger boat trail er.
by: Jason09/02/2019
Exact replacement part at a great price. Lights are extremely bright.
by: John F 02/10/2017
Led light, works great.
by: ANTHONY BENANTI 12/15/2016
Great durability, they are put thru tough conditions all day long. Great price and fit.
Highly recommended.
by: Jason01/12/2019
Nice and bright LEDs, easy to install, no complaints
by: Craig02/13/2018
A clean and simple light that's easy to lnstall at a great price
25
55
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Is There LED Version of Optronics Trailer Clearance Light MC52RBThere is absolutely an LED alternative with the same dimensions as the incandescent Round Trailer Clearance, Side Marker Light # MC52RB. What you need is the following: - LED Trailer Clearance and Side Marker Light # MCL52RB The # MCL52RB is the same 2-15/16" diameter with mounting holes that are 2-15/16" diameter apart on the flange. The only other thing you'll need with the light is 2-Wire Pigtail # A46PB.
view full answer... - Replacement Marker/Clearance Lights For a 2006 Ranger Trail Boat TrailerUnfortunately I have no insight on what Ranger Trailer put on their boat trailers in 2006. All I have to go off is images I could find which looks like they use the Amber # MCL52AB or # MCL52AMB and Red # MCL52RB or # MCL52RMB. The difference is the parts ending in MB have pigtail wires while the other lights use a plug in 2-pin connector. If you can send me some images of your lights and remove one of them to check the wiring we can help you determine the correct replacement.
view full answer... - Does LED Trailer Clearance and Side Marker Light MCL52RB Need Mounting BracketThe trailer taillight part # MCL52RB is a flange mount light which means it uses the mounting holes around the flange of the assembly to attach to the trailer so you do not need to use any additional brackets. You will need a light harness like the part # A46PB though.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Written by:
Tyler C
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.