Summer Starts Here - Save up to 70%
6" Oval. All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Flush mount with built-in flange. 20 Diodes.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Optronics Oval Fusion LED, hardwired stop, tail, turn, backup, and warning trailer light. It has the red in the clear lens. Now this oval trailer taillight has a nice smooth, red exterior, and it serves five functions. And I do have this hooked up to some 12 volt power, so we can go through those functions, and see how they operate and how bright they are. So I'm gonna first turn on the 12 volt power, and there you can see the taillight function will come on, turn off our overhead lights.
So this taillight function gives you an outer band of 10 red LEDs that light up, and then for your stoplight, so when you apply your brakes, you can see that same 10 red LEDs will get brighter, let people know that you're hitting your brakes and stopping. And then the turn signal light, when you put on your turn signal, you can see it's the same 10 red LEDs that'll get brighter, and flash to let people know which side you're turning on. And then I wanna hook up the backup light, just so you can see what the backup light would look like. So once we get our backup light, then when you go into reverse, you can see that that center X section, that X lens, it's a clear X lens, has six white LEDs in it. So when you go into reverse, they will light up very bright to let people know you're backing up.
And then on this slide, what's a unique feature is it does also offer a warning light. You can do a warning light, and there's two different wires here. We're gonna first hook up the green wire. So if you just hook up the green wire, it's gonna get you an amber warning light. So when you turn on your warning light, you can see it gets you four amber LEDs that are flashing.
And then the other way is, if you hook up just the orange wire, and then hit your warning light, you can see it's the same center section there, but it's the six white LEDs that are flashing. And then what's even nice is if you hook both those wires together, the green and the orange, with both of 'em hooked up, you'll notice when you turn on your warning lights, you're gonna get it alternating. You're gonna get the four amber LEDs. And then next is the six white LEDs, and then back and forth between the two. Go ahead and turn it back on.
Now this light is 20 LEDs. Turn off our power, disconnect everything. Now it does offer four flash patterns, and those can be synchronized with multiple lights when it's connected with the blue and the yellow wires. Now later on here, I'm gonna go through all the wires in the back here, and tell you what they connect to, but I first wanna talk about the light itself. It is a sonically sealed waterproof housing and lens unit. Makes it submersible. Does use the durable SMT technology, which is surface mount technology. This is the construction of the LED circuit board. It'll better withstand shock and vibration, and allows for improved heat distribution. We mentioned it uses LEDs, so they make great replacements for incandescent lights. They'll last 50 times longer, and they are more efficient. They'll provide brighter light with less power output, and of course, no bulbs to replace or brittle filaments to break. And they do offer lifetime warranty on the LEDs. Again, the red lens right here has red LEDs for the stop, tail, and turn circuits. The clearer lens, this X lens in the middle, has white LEDs for your backup light. And then the clear lens also has white and amber LEDs for your warning light. As you can see, it is a flush mount design, has a built-in black flange all the way around, has the holes in it for your screws. Now the hardwood install, this is not included. You would have to supply that. The very back here, it is hardwired, ready to install, has the wire lengths about eight inches. And then here's all the colors. There's eight of the wires back here. So what I am gonna do is go through them. We'll start with the black wire. Black wire right here is for the taillights. White wire is for your ground. The red wire, stop and turn. And the brown wire right here is for your backup lights. So then the four remaining wires we mentioned, the green wire, it's for your amber warning, orange wire, it's for your white warning. And then the blue and the yellow. The blue is for the flash patterns, and the yellow is for synchronization. So in other words, if you have other lights like this on your vehicle or trailer, and you want them all to operate the same, you can use that yellow wire to synchronize them. This light is DOT, Department of Transportation compliant. It does meet the Federal Motor Vehicle Safety Standard 108 requirements for automotive lighting, and it is a 12 volt light. Last thing is just the dimensions. So the overall length, including the mounting flange, we put a ruler on it. It's gonna come out about seven and a half inches long. Width on it, the widest point, including the flange, three and a quarter inches wide. Total depth of about seven-eights of an inch, and just the light itself. The light face is gonna be right about six and three-eights inches, by about two and one-eights inches. But that should do it for the review on this Optronics Oval Fusion LED hardwired stop, tail, turn, backup, and warning trailer light.
Average Customer Rating: 4.7 out of 5 stars (232 Customer Reviews)
6" Oval. All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Flush mount with built-in flange. 20 Diodes.Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
Great addition to the rear of my Hummer H1
The order came in quicker than expected, packaged well and we are very pleased
you were the only place that had the light I needed. ordering was easy, shipping and delivery were fast
Absolute garbage I had a custom built trailer with custom wiring and a lot of time and effort was put in to make sure that these lights did not fail I used aluminum rivets with nylon spacers fully soldered connectors with adhesive heat shrink and the lights still failed. Unfortunately I have not reached out to to see if they have warranty. But, unfortunately the money spent already to build a separate housing for these lights will cost me in the long run due to the fact I can now only run the similar light. Very unfortunate they have not tested these lights thoroughly enough.. do not recommend. Especially for salt water.
Easily replaced my lights on the cargo trailer and they look great.
Works great so far no issues nice and bright not had a bulb blow out yet!
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
Great product & wonderful service.
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
Used on our off-road teardrop trailer. Install was easy. Quality appears robust. Holding up well after a year, though half that time was sitting as we had a long winter here this year.
Purchasing with etrailer.com was easy, quick and the product arrived when estimated. Excellent service. This light bar was exactly what we were looking for.
I purchased these to spruce up an old fold-out tent trailer that I bounce around out in the hills. They were easy to install and draw almost no current compared to the old incandescent lamps.
I wired it so when I'm camped, I can run the reverse lights on the trailer battery to light up the camp site instead of having to carry around a flash light.
Great value, and they work well also. You can't go wrong with etrailer lights.
Need to return. Turns out my trailer only has 2 wires, tail stop and signal. backup will require additional wiring.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.