Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens
(1717 reviews)
Price: $26.63
In Stock
Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens
Item # STL22RCB
Retail:$28.16
Our Price: $26.63
You Save: 5%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1717)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL22RCB
- Tail Lights
- Oval
- LED Light
- Red
- 6-1/2L x 2-5/16W Inch
- Recessed Mount
- Stop/Turn/Tail
- Submersible Lights
- Optronics
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug
Features:
- Oval trailer light serves 3 functions on trailers less than 80" wide
- Stop light
- Tail light
- Turn signal light
- Sonically sealed, waterproof housing and lens unit is submersible
- Miro-Flex faceted reflector design provides increased light output with a contemporary appearance
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate lens and housing
- Clear lens over red LEDs
- Flush mounts with grommet (A70GB - sold separately)
- Mounts in any 360-degree position
- Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately)
- DOT compliant
Specs:
- Overall dimensions: 6-1/2" long x 2-5/16" tall x 2-1/4" thick
- Diodes: 12
- Power draw at 12.8V:
- Stop/Turn: 0.161 amps
- Tail: 0.009 amps
- Lifetimes warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Recessed-Mount Light
Recessed-mount trailer lights install underneath a grommet (A70GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
STL22RCB Optronics Miro Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens with Red LEDs
Alternate part number: STL-22RCB
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens - STL22RCB
Average Customer Rating: 4.8 out of 5 stars (1716 Customer Reviews)
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plugby: Benjamin 08/27/2023
Have these on my boat trailer and have held up to be submerged in water. Very happy with them.
by: Ray L.10/13/2012
I attached lights to my 34 Ford Coupe replica Streetrod golf cart. The original lights weren't bright enough. The Led lights fro etrailer were great and really bright. Wonderful service on all end talking on the phone and shipping items. Thanks for the friendly service and a great product.
by: Derrick L.02/08/2018
I love the new taillights. I ordered mine for use with Lamin-X green lens tint film which gave it a green-mirror effect. Lights up bright red! I love the new look!
by: Km11/10/2015
Great lights very bright and perfect for my complete clear lens trailer light set up
by: Doyle 07/21/2020
I ordered a cheaper version of these lights and they lasted two trips down the boat ramp.
I decided to up grade to these higher quality lights for my boat trailer and I have had only great results with no problems. They are water proof and highly visible in the day and night time. Get you a set you will not regret your purchase.
by: Sherm J.06/25/2019
Replaced the 4 original lights on my Pace Shadow race trailer. Easy installation and proper fit. Have worked very well since install approximately 1 year ago.
Sherm J.
6/26/2020
Still working well after thousands of miles of use.
by: Craig09/30/2016
What do y'all want a follow up to? If i had a nickel for every item I've ordered off of ETrailer, I wouldn't have to work for a few months... I keep coming back because the prices are fair, shipping is free and fast, and ETrailer has everything I need.
I do wish you sold trailer kits though. Being a welder, I have built a few trailers in my free time and sold them for a small side business. Why isn't there an axle, fender, brakes, springs (shackles and all hardware) tires and wheels kit? It would be nice to not have to go and click and add to cart all the multitude of items I need to build a trailer individually. Just saying...
by: Terry M05/07/2013
The LED brake/tail lights work great, so far. Plug and play.
The gaskets that I also bought fit the lights, but not the holes in the trailer - so measure holes before purchasing.
by: Sadie06/08/2023
Kept great updates on the order progres s.
by: Jero03/01/2012
I used the complete line of Miroflex lights on a Custom trailer I built. 6 2" ambers 11 2" reds and 4 of the 6.5" tail lights. all clear lenses and the trailer passes the DOT inspection in the state of CO. great price when your buying as many lights as i did.
by: Dave H.06/24/2016
Ordered these on Sunday night. Really liked the selection. Received the package on Thursday. Installed and tested out that evening. Lights fit great into grommet and assembly fit in the housing hole snuggly. Lights are brighter than I expected. I am very happy with these. I will add these to other trailers I have.
by: Toby09/28/2011
I found this website by accident and looked over it for a few days and found some other similar websites but none of them were as low in price and as easy to look around at the many diff products they have . I also like that if you buy anything over 150 dollars it's free shipping and I got it all in 4 working days . I'll be shopping this website again for sure
by: David12/19/2021
These lights are well made and look great. They are a direct replacement for the older version I have. Tinted them to match the trailer. They were very easy to tint as the light surface is very flat.
by: Ken G.08/24/2013
All items arrived in excellent condition, and prior to the expected date. My experience with etrialer has in always been most satisfactory, products have proven to be excellent, and the prices are always competitive (usually lower) than the competition.
by: Robert R.03/03/2014
I wanted to up grade my rear lights and used these , they look great and were a perfect replacement and much cheaper than I could purchase locally.
by: P J C09/12/2013
Good product, nice and bright, I've used this exact product severla times and always satisfied.
by: Gene 08/12/2020
Installed on my boat trailer and so far I really like them.
by: Jordy09/11/2021
Best tail lights I’ve ever used. Only lights I’ll purchase from now on
by: Martin G03/10/2015
once again e trailer has supplied me with a quality product at a competitive price
by: Pat C.07/23/2015
Great products, and service. Priced about half of autoparts store!
by: M. Wilson09/25/2013
Good looking lights, great to modernize an older trailer, or to use in a new build.
by: Victor07/19/2016
Exactly as promised. Haven't put on the trailer yet, but I have no concerns. Very happy!
by: Steve N.06/15/2012
Lights are well made and delivery was faster than expected! I will order from etrailer again. Thanks guys!
by: Brent P.08/08/2019
Extremely bright
Daniel P.
8/10/2020
Lights are still working like new.
by: Tony 06/01/2021
Has worked great ... very easy to install.... great product..
25
1657
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Looking for 6-1/2 Inch Oval LED Trailer Light to Use for Back Up LightWe do indeed have a 6-1/2 inch oval LED lamp that is DOT certified for use as a backup light. The part # is BUL22CB. A utility light like the one you referenced, part # BUL78CB is not DOT compliant because the clear lens allows the light to be bright enough to be blinding. A wiring pigtail, part # A45CB and grommet, part # A70GB will also be needed.
view full answer... - Pigtail Recommendation for Use with Clearance Light Part STL22RCB for Additional ClearanceYou are absolutely correct. The 90 degree pigtail part # A47PB would give you the needed clearance to install the part # STL22RCB. This would be exactly what you need.
view full answer... - Is There an Amber Version Available For Optronics Micro-Flex LED Lights # STL22RCBYes, we have an amber version of the Micro-Flex LED lights, the Optronics Miro-Flex Sealed 6-1/2 Inch Oval LED Light, part # STL22CCAB. This light also features 12 diodes and has the same dimensions as the # STL22RCB light that you referenced. To mount this light, you will want to use the Rubber Grommet for 6-1/2 Inch Oval Trailer Tail Lights, part # a70gb. The correct wiring connector you will need is the Optronics 3-Wire Pigtail, part # A45PB.
view full answer... - Availability of a 6-1/2 Inch Oval Tail Light with Chrome Bezel and Round LED Marker LightsThere is a Stainless Steel Mounting bracket, # 337LB1SS, that can be used for mounting the light but we do not have a chrome bezel for the 6-1/2 inch Oval, LED Trailer Stop/Turn/Tail Light, # STL22RCB. You will also need a grommet, # A70GB, and a straight, # A45PB or right angle, # A47PB, pigtail harness for installation and wiring of the light. We have 11/16 inch round clearance lights. For amber lights you would need the Mini LED Side Marker and Clearance Light, # MCL11AKB, and for red...
view full answer... - What Size Should the Mounting Hole Be for Optronics Trailer Light # STL22RCBWhen drilling holes for the trailer lights, # STL22RCB, you can use a 2-1/2 inch hole saw and then use a file or rotary tool to enlarge the holes to the 2-5/8 inches needed for the rubber grommet , # a70gb. When you do drill the holes, make sure that the outside edge of each hole is 6-3/4 inches apart for the overall length of the light. I have included a picture that shows the dimensions of the hole that the grommet fits into.
view full answer...
- Lighting Requirements for Boat Trailers for Updating to Submersible LED LightsFor boat trailers we recommend using submersible type lights which have a drain hole to allow water to exit the fixture. We also recommend always disconnecting the trailer connector before backing the boat into the water, even if you have submersible lights. On the linked page you can view all submersible LED type grommet-mount lights that we offer. Usually a combination stop/turn/tail light like # STL111RB is employed. I also included a link to a helpful article on the lighting requirements...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Tyler C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Chris R
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doyle T.
7/22/2021
GREAT Ive had no problem with these lights. They have been in the water hundreds of times and are still in great shape.