Summer Starts Here - Save up to 70%
4-3/16" x 1-3/8" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. Red LEDs. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are looking at the Optronics Sealed Miro-flex Mini Star Marker and Clearance Light, part number MCL17CRB. This light is designed to be sealed and waterproof, both lens and housing. It has a clear lens with a chrome cover. It is a two wire design lead with a ground and power wire to mount to all surfaces. It has three red LED, Light Emitting Diodes.
These are lifetime warranty LEDs, the light draws .047 amps on 12.8 volts. Lets go ahead and hook it up so you can see how it lights up. Now well go ahead and turn off the lights so you can see what it looks like in the dark. And there you have it for Optronics Sealed Miro-flex Mini Star Marker and Clearance Light, part number MCL17CRB.
Average Customer Rating: 4.8 out of 5 stars (1716 Customer Reviews)
4-3/16" x 1-3/8" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. Red LEDs. P2 rated.Awesome and very bright.
While these look great, they will require trailer modifications on almost any retrofit.
I bought a pair of these for my old Airstream. The first one went (curb side) on ok. I had to drill extra holes in the skin to facilitate the wires. It looks fabulous.
The street side was not so good. The existing wires exit the skin near the mounting screws. I tried adding holes for the new screws but they hit a support. The design of this product will not cover the old wire holes and the trailer is not set up to allow the large holes required for the wires on the product. I’m back to conventional clearance lights.
I purchased these clearness lights for my 1950 spartan royal mansion I love the brightness at night but the slim clean look in daylight modern but safe with a little vintage show etrailer delivers quickly looking forward to doing business with them soon thanks Bronson
This is a very nice light and fits perfectly. Just as represented.
I purchased this item for my Scamp 13ft. camper. Installation was a breeze and the wiring simple. At night they really set off the camper.
Great.
Very good to work with
Looks and works way better than the factory lights on my Thule Transporter Combi.
etailer has everything, even these tail lights for my Thule hitch Terrapin Cargo Box to replace the original sealed incandescent Tail Light Units.
shipping delayed but communication with etrailer outstanding giving the truth.
great service !! I ordered my lights and they shipped the same day .Received them today. I could not be more happy. Thanks,
These side markers (both red and amber LED) are great for my 12' trailer. They have 3 LEDs (you can also get 4), and their size is perfect for a small trailer. The LED's are really bright, not only at night, but also during the day, so they are easily seen. I especially like the fact that they are sealed, so there should be no water intrusion problems in the future. I have included a few pictures, the first showing the round LED brake/turn/running/reverse lights (that I had purchased earlier from etrailer) with the red side marker mounted vertically on the outside. The second shows a side view of the red side marker light, and the 3rd picture shows the side marker mounted to a small piece of 1" X 1" x 1/8" aluminum angle which I painted black to match the mounting frame of the round LED lights. I mounted the LED side marker to one leg of the aluminum angle, then mounted the other leg with 1" standoffs to two holes already present on the black mounting frame of the round LED light. Although all the lights are sealed against water intrusion, I decided to mount them on each side of the trailer at the top of 2 PVC pipes, about 36" long each, where the lights would not be exposed to immersing in water when launching/retrieving a boat.
Everything was good except one of the lights was missing the chrome bezel. Because I was replacing lights I used one of the older bezel.
I installed these lights in a T@B teardrop camping trailer. The grommet would not work on this style trailer so I installed the lights using a silicone adhesive the same as the original Peterson lights. eTrailer delivered them in the same timely manner I have come to expect from them and the LEDs were easy to install. These lights are blindingly bright - simply amazing. I had rear lights with 1157 bulbs which I had upgraded to 2357 bulbs and equipped the tow vehicle with a powered converter but the light output was dim by today's standards. These lights are twice as bright on running lights and about 4 times brighter on the brake/turn signal elements. The thing we all fear when towing is being hit from behind by a driver that does not see our running, brake or turn signal lights in time. I know these lights will vastly improve the safety and visibility of our trailer. Thanks!
Great little lights, and very bright as well. They have been installed on a trailer and submerged many times since installed, and still work great!! Can't beat LED's for brightness and, hopefully, longevity!!! Attached is one picture of the overall trailer, and a closeup of the amber side light. I also have 2 red sidelights that are mounted above water at the rear of the trailer, and they are still working great as well.
Direct replacement for broken lights on my RV. Easy to do business with etrailer!!
This fixture was the exact replacement for my 2011 Trailmanor 2720 trailer. The manufacturer had moved to a more modern looking fixture. I was even able to use the old chrome piece from the old fixture to keep a uniform age look. I installed a wireless rearview camera and needed a new fixture and its longer wires to make everything work. May look a little strange, but it works like a charm. E-Trailer service was excellent as usual.
These are a perfect upgrade on my jet ski trailer which was constantly burning bulbs maybe because the lights were not watertight. No amount of dielectric grease prevented it. These were easy to install. They are watertight and are twice as bright as the old ones. Great customer service! I highly recommend the lights and etrailer.com!
I found the exact replacement side light to match my custom trailer, reasonable price and quick shipping
These lights are great! Since installing them, I am amazed how much respect my rig gets. Other motorists used to give me space when I used by turn signals. Now they immediately yield to me and give me the space I need. I am so grateful that I invested in these lights!!!
Though I have not hooked up yet…the lamps are an exact replacement for my Toyhauler. Gaskets or screws do not come with these lamps, though there should be a gasket with them. I have material and will make my own (see photo’s).
etrailer does well with follow up email/s along with your order/s. I’ve had no issues with any previous orders as well. Shipping took about a week through USPS.
ds
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.