M3 LED Clearance or Side Marker Trailer Light - Submersible - Amber LEDs - Clear Lens

Video Transcript for Review of Optronics Trailer Lights - Clearance Lights - OPT34FR

Jeff: Hello everybody. This is Jeff from etrailer.com. Today, we're going to take a look at this M3 LED submersible clearance or side marker trailer light with the clear lens. Now this is a round trailer light, which will serve as either a side marker or clearance light. It is a sonically sealed waterproof housing and lens unit, which makes it submersible. And it does use LEDs, which will make great replacements for incandescent lights, it'll last 50 times longer and they're more efficient because they'll provide brighter light with less power output.

And of course there's no bulbs to replace or brittle filaments to break, and they do have a limited lifetime warranty on the LEDs. The housing is a durable polycarbonate lens and housing. Has the two amber diodes and the clear lens and this is compatible with 12 volt DC systems. At the end of this video, I am going to hook this up to some 12 volt power just to show you how bright it is.This is designed to Mount on the surface of the trailer. Now the hardware to mount it is not included, and we do offer an available chrome bezel that provides a nice finished look of the light.

Those we do sell separately on our website, and it's usually listed on this product page as a related product. You can see it uses a two wire pigtail with the male bullet connectors, and you can see they're both yellow wires so it doesn't matter if one's positive, one's negative, you can hook it up either way. It is a P2 rated light produces a 90 degree beam pattern, and it is DOT, Department of Transportation compliant.Few specs on the slight, go ahead and get our ruler out. The diameter is going to be right at one and 11 sixteenths inches. The depth of it, right at three quarters of an inch deep, the mounting hole dimensions, in other words, there's two mounting holes.

One here, one there, the distance between the mounting holes center to center is one and three quarter inches. And the power draw at 12.8 volts is 0.03 amps. So I'm going to go ahead and take our 12 volt power and as I mentioned, it doesn't matter which one's ground or which one's power. Hook it up either way. Got those hooked up, I'll go ahead and turn on our 12 volt power and then you can see there's the bright two amber LEDs lit up.

I'll go ahead and turn off the overhead lights and you can see how bright it is. As I mentioned it's a P2 rated light, so it does produce a 90 degree beam pattern. Then turn back on overhead light and we'll go ahead and turn off our power. But that should do it for the review on this M3 Led submersible clearance or side marker trailer light with the clear lens.