Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-3/4" x 1-1/8" Rectangle. Low-profile, trailer light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate base and amber acrylic lens. Surface mount. 2-Wire pigtail. PC rated.
Features:
Specs:
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Hot Dot LED Clearance and Side Marker Light. This small rectangular trailer light functions as both a clearance and side marker light when properly mounted. LEDs make great replacements for incandescent lights, they last longer, they burn brighter and they're more efficient. With LED systems, you don't have to worry about replacing bulbs or worry about brittle filaments. The unit is completely sealed so it does have a nice weatherproof construction to it. It features the Amber lens.
It's made from a durable plastic construction. It's a surface mount installation, mounting hardware not included. They do have the two pre-drilled mount holes right here. The unit is SAE approved. It's a two wire design.
White wire is your ground wire, yellow wire is your power lead.When it comes to the overall dimensions of the unit, starting with the overall length, that gives us a measurement of 2-3/4" long, the overall height is about 1-1/8", and the overall depth from back to front is about 1/2" deep. The distance between the mount holes, center-on-center, is 2". We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead light so you can see it in a lower light setting. You can see here, the unit sends out a nice bright consistent signal.
The lens allows plenty of light to come through. It contains a total of two LEDs or two diodes. The multi-diode design really helps optimize the overall light output. That's going to do it for today's look at the Hot Dot LED Clearance and Side Marker Light.
Average Customer Rating: 4.5 out of 5 stars (31 Customer Reviews)
2-3/4" x 1-1/8" Rectangle. Low-profile, trailer light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate base and amber acrylic lens. Surface mount. 2-Wire pigtail. PC rated.I ordered 5 replacement amber marker lights as I only needed one light. I order 5 lights so all would match to find out 4 of the 5 are defective. Maybe someone should test the lights before shipping them.
All parts are exact fit as old parts
Perfect match for my 2010 Tiffin Phaeton MH clearance light. That was a real concern because it sits next to four others. Very happy.
We needed a trailer side marking light before we left for vacation. Etrailer had the exact light we’d been looking for! We ordered and paid for fast shipping and it arrived as expected! Online ordering was easy and shipping was as expected! Would definitely order from etrailer again!
Exactly what I wanted. Fits perfectly. Great site for the hone RV handyman. Keep up the good work and great service
Just the item I was looking for and now after one year they still look new and work great thank you etrailer
Exactly what I needed fit my motorhome perfectly. And it arrived when I needed it. I have always had a good experience with you. Thanks.
I have bought 2 maker lights everything works great.
Fast free shipping!!
Parts are exact fit as I led parts
Still working after one year
matches old lights
right light fast shipping
Product received in great condition, installed without any issues. Will provide feedback on longevity of product over time. Very pleased thus far.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
8/23/2023
Definitely unusual for the lights to be defective. I will have our Customer Service team reach out to you.