Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
(15 reviews)
Price: $183.94
In Stock
Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
Item # K71-654-00
Retail:$307.76
Our Price: $183.94
You Save: $123.82
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Videos (1)
- Photos
Dexter Trailer Leaf Spring Suspension - K71-654-00
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
Replace your standard equalizers with these shock-absorbing E-Z Flex units to get a smooth ride for your tandem-axle trailer. Equalizers with rubber cores absorb road shock for a smooth ride. Heavy-duty shackle straps ensure strength. Includes bolts.
Features:
- Replaces rubber equalizers for E-Z Flex heavy-duty rubber suspension system by Dexter Axle
- Rubber cores isolate and absorb damaging road shocks before they hit the trailer frame and contents
- Easy installation - no welding, cutting or grinding
Specs:
- Application: E-Z Flex heavy-duty rubber suspension system by Dexter Axle (K71-652-00)
- Replaces Dexter standard equalizer: 13-104
- Tandem axle application
- Height: 5-5/8"
- Length from center of left eye to center of right eye:
- Minimum: 5-1/4"
- Maximum: 6-1/4"
- Capacity: up to 6,000 lb axles
- Quantity: 2 replacement equalizers, bolts, and nuts
K71-654-00 Dexter Axle E-Z Flex Equalizer Kit - Double Eye Springs - Tandem Axle - 6,000 lbs
Video of Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Dexter Axle Trailer Leaf Spring Suspension - Replacement Equalizers - K71-654-00
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the replacement 5 5/8 inch equalizers for the Dexter Axle E-Z Flex Heavy-Duty Rubber Suspension System. Now, these parts here will replace a damaged or worn out rubber equalizer on your Dexter E-Z Flex Heavy-Duty Rubber Suspension System. That system we do sell separately on our website, and it's part number K71-652-00. As you can see, this is for a quantity of two replacement equalizers, the bolts, the nuts, and some grease packets. Now, the rubber cores on these will isolate and absorb any damage and road shocks before they hit the trailer frame and the contents.
If you noticed on the very top of these, there's two grease zerk fittings that allow for easy lubrication of your bolt through here, you just attach your grease gun to there and pump the grease in there. And these are very easy installation, there's no welding, cutting, or grinding required. Capacity again, this is for tandem axle applications up to 6,000 pound axles with 33 inch spacing. This does replace the Dexter standard equalizer, which is part number 13-104, and just to give you a few measurements on these, if we take our ruler and if we measure from the center of this bolt eye to the center of the other one is about 5 5/8 inches, and it does have a range, since there's a rubber insert in there, it'll allow this to have a range of a minimum from 5 1/4 inches up to 6 1/4 inches. And then the last measurement, we're gonna measure from this center of this top bolt hole to the center of these two lower bolt holes, so if we do go on that, you can see it's gonna be right at about two inches.
But that should do it for the review on the replacement 5 5/8 inch equalizers for your Dexter Axle E-Z Flex Heavy-Duty Rubber Suspension System..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs - K71-654-00
Average Customer Rating: 4.9 out of 5 stars (14 Customer Reviews)
Replace your standard equalizers with these shock-absorbing E-Z Flex units to get a smooth ride for your tandem-axle trailer. Equalizers with rubber cores absorb road shock for a smooth ride. Heavy-duty shackle straps ensure strength. Includes bolts.by: Randy05/29/2022
I’m totally satisfied with these equalizers. I installed these and a set of Roadmaster Comfort Ride Shock Absorbers to my travel trailer because I was worried that something was going to get broken on my trailer because of the harsh ride it was going through on the rough roads we drive on. I knew the ride was harsh when I was opening the trailer door and finding everything that wasn’t attached turned upside down or on the opposite end of the trailer and some attached items torn loose. On one trip the fire extinguisher screws came out of the wall, another trip the screws holding the dinette seat back to the wall came out, and also the smoke detector came off of the ceiling and was lying in the floor. I knew I had to do something to help the ride. I ordered these parts from Etrailer and installed them and I was amazed at how well they worked. On our next trip I opened the door on the trailer and everything was still in its place, I could hardly believe it, what a difference. As an added bonus these parts took away the little bit of sway the trailer had. The sway when a tractor trailer rig passed us is completely gone now. It pulls so good now that I forget it is back there sometimes. I highly recommend this to anyone with a bumper pull travel trailer.
by: Brad01/23/2024
I put these on my tandem axle boat trailer, they arrived in 3 days and appear to be very good quality. The 5 year warranty tells me I shouldn't have any issues.
by: Alex lamar05/06/2024
Very clean strong look compared to standard equalizers - used these with Dexter Axle flip kit & heavy duty shackles& new leafs 2007 Attitude toy hauler
by: Matt 10/07/2023
Install when according to plan. Fairly straightforward.
by: Michael O08/03/2015
Pending road test, but seem to be very good quality and it is nice they are can be greased for longer life. On my application I went from a 4" high equalizer high link to this (2" high), but welded an extension on the trailer frame to maintain the prior spring/suspension geometry, but I don't think it is required, I primarily did this as my other frame upgrades would have interfered with the grease fittings, so the 2" extensions gave needed clearance in my application.
by: Tom C06/12/2019
They are doing well for us. Only issue was after installation and a trip when I went to grease the pivot points, one of the zero fittings came off. Looks like the hole was never tapped completely. Just a few threads in the beginning. I ran a tap in it and installed a new zero fitting. This would have much easier before installation.
by: Dan 09/03/2022
Easy install and makes the trailer ride noticeably smoother.
by: Wendy L.08/07/2019
They were easy to install, and have worked like a charm. We would recommend these to anyone looking!
by: Rick06/28/2019
I worked with William over the phone and was able to order the correct part. It arrived yesterday and it is the right part for my RV. Great quality, seems like a fair price and great customer service by William B.
by: Tom05/25/2015
I got exactly what I needed for a fair price and received it in a very timely manner.
by: Bradley11/01/2017
They sent what I ordered and it arrived before I even arrived at the delivery before bI got there.
by: Mary02/16/2024
by: George 11/07/2019
Ordering was easy and the product got here four days earlier that expected.
by: Matthew 02/13/2024
by: Denis 05/26/2023
15
15
See what our Experts say about this Dexter Trailer Leaf Spring Suspension
- Can Mor/Ryde LRE Suspension Hangers Be Replaced by Dexter EZ-FlexTo replace your current Mor Ryde LRE system and go with an EZ-Flex system is possible, but you will need to replace the center hangers as well as the equalizers to do this. To pick out the correct equalizer will require you to measure the distance between the bolt holes from left to right on your current setup so that you can get the correct EZ Flex. If the distance is between 7-1/4 and 8-1/4 inches the part # K71-653-00 would be the correct equalizer. If the distance is between 5-1/4...
view full answer... - How to Determine Which Over Under Axle Kit Would Be NeededThe diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle. Some refer...
view full answer... - Choosing the Right Dexter E-Z Flex Suspension for Replacing Standard Equalizers You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers # K71-654-00 (5-5/8") and 8,000lb Equalizers # K71-655-00 (7-3/4"). The 6,000lb is for hubs spread 33" on center and 8,000lb for hubs 35" on center. If you choose either the Dexter E-Z Flex Suspension 6,000lb Kit # K71-652-00 or 8,000lb Kit # K71-653-00 they will include 2-1/4" shackle straps. If your current shackle...
view full answer... - Correct Replacement E-Z Flex Suspension System for a 1996 Holiday RamblerThe equalizers in the kits # K71-652-00 and # K71-654-00 that you referenced are actually the exact same. The only difference between these kits is that the 652 comes with replacement shackle straps while the 654 only comes with the equalizers and no shackle straps. So to choose between the 2 is just a matter of your shackles being in good shape or not. Even though your axle spacing is 32" as opposed to 33" I think you'll still be okay with this kit. Basically you just want to make sure...
view full answer...
- Recommended E-Z Flex Equalizers To Replace TREQ104 Equalizers For Thunderbolt Toy HaulerWe have just what you are looking for. The replacement equalizer you can use to replace the # TREQ104 is the Dexter Equalizers for E-Z Flex Heavy Duty Rubber Suspension, part # K71-654-00. The package contains two equalizers, bolts, and nuts.
view full answer... - How Often Should Dexter EZ-Flex Equalizers Get GreasedI spoke to my contact at Dexter and he informed me that they recommend greasing the E-Z Flex equalizers every three months or 3,000 miles. I also attached a pretty helpful guide to how often trailer components should be maintained. For grease Dexter recommends wheel bearing grease. For that we recommend the red grease part # L11390. A shock kit would help your trailer and would work well with the EZ Flex system but since you said you have square axles we don't have a kit for that. The...
view full answer...
- Is there a Lifespan for the Rubber Bushings in E-Z Flex Heavy Duty Rubber Suspension SystemsLike most things, the longevity of the rubber bushings in the E-Z Flex Heavy Duty Rubber Suspension System depends on numerous factors including, but not limited to, how much the trailer is used and the weather conditions. But they should last a very long time in most situations if not the entire life of the trailer. If you can compress the bushings by hand then they are worn out and should be replaced. Severe dry rot is also something to check for. It would have to be really bad dry rot...
view full answer... - Grease to Use in Dexter EZ Flex EqualizersFor grease Dexter recommends wheel bearing grease in the EZ Flex Equalizers. For that we recommend the red grease part # L11390 which is the most heavy duty and best protecting.
view full answer... - What Is The Longevity Of The E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00?It is really difficult to say how long the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers, # K71-652-00, will last. It depends on so many different variables including weight, driving conditions, weather conditions, if it was maintained correctly, etc. I reached out Dexter Axle and they said that they don't have any specifics they can give because of all of those variables. What they did point out that I think is valuable to know is that even if the...
view full answer... - Replacement Suspension Components For A 2020 Grand Design Reflection 337RLS Fifth Wheel Trailer The etrailer 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e34SR most likely would be the correct choice for your 2020 Grand Design Reflection 337RLS, but you'll want to confirm by measuring from the center of one eyelet to the center of the other eyelet. You'll want to lift the trailer and let the axles hang down to get an accurate measurement. The # e34SR has a 25-1/4" eyelet to eyelet measurement. For the wet bolts and shackle straps you'd need the MORryde Suspension Upgrade...
view full answer...
- How to Determine if E-Z Flex Heavy Duty Rubber Suspension System Will FitThe Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System # K71-654-00 you referenced are simply replacements for the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers # K71-652-00. To determine if these will fit your 5,200 lb axle you need to know what equalizer you currently have. The reason is this suspension system is designed to be a replacement for standard equalizers which are 5-5/8" long from center to center of their bolt...
view full answer... - Recommended Equalizer Upgrade For 2016 Winnebago 2351DKS W/ 5-1/2" Long EqualizersI would be happy to help! Since the horizontal mounting hole measurement of the equalizers on your 2016 Winnebago 2351DKS is 5-1/2" there are a few different equalizer upgrade options. To determine which one will be best for you, you will need to measure from the center line of the horizontal mounting holes to the center of the upper mounting hole which will tell you how tall your equalizer is. The Road Armor Shock Absorbing Equalier # LC696740 you were looking at is a great option that...
view full answer...
- Dexter E-Z Flex Suspension Kit For a 2018 Coachman Apex 250RLS Travel TrailerThe Dexter E-Z Flex Suspension Kit # K71-652-00 is the kit I recommend for your 2018 Coachman Apex 250RLS. This kit will replace the Curved Equalizer # TREQ104 that you currently have along with all the standard bolts with wet bolts for your leaf springs. The Dexter Replacement Equalizers # K71-654-00 are the same as the equalizers you get in the above kit. These are generally used if someone already has wet bolts or their equalizers wear out over time. I recommend carrying a Grease...
view full answer... - Will Dexter E-Z Flex Equalizer Kit for Tandem Axle Trailer Work with 2-3/4" ShacklesThe Dexter E-Z Flex Equalizer Kit - Double-Eye Springs part # K71-654-00 will allow you to still upgrade the equalizers on the trailer without changing out the shackle straps as well. These are the same width as the existing equalizers so you can reuse your old hardware and shackle straps. Please note, there are bronze bushings inside the Dexter E-Z Flex Equalizers so you'll want to make sure you use wet bolts with these bronze bushings, the Wet Equalizer Bolt part # 126B2. If you want...
view full answer... - Can an EZ Flex Equalizer Replace a Shorter One on a TrailerLeft to right the EZ Flex Equalizer part # K71-654-00 matches up perfectly as it has a range of 5-1/4 inch to 6-1/4 inch. The height will be a little bit taller as it sits 5-5/8 which will be 1-1/8 inches taller than what you have. To compensate for this you can go with a taller shackle so that the spring gets carried at the same height. You would need to measure your current shackles and then check out the link to the page I attached that has all of the shackles we carry. You would want...
view full answer... - Availability Of Suspension Upgrades For 2020 East to West Silver Lake TT W/ Tandem 3500lb AxlesI would be happy to go over the suspension enhancement options for your 2020 East to West Silver Lakes Travel Trailer with Tandem 3500lb Dexter axles, but the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailer # MR97ZR you were looking at only works with 5200-7000lb axles. Since your equalizers measure 5-3/4" center to center of the horizontal mounting holes you can use the Dexter E-Z Flex Equalizers # K71-654-00 as a replacement. These equalizers have rubber cores to absorb...
view full answer... - Can Rubber Bushings Be Replaced On E-Z Flex Heavy Duty Rubber EqualizersThe rubber core of the Dexter Equalizers like part # K71-654-00 are not an item that can be replaced. If the bushing would become damaged the entire assembly would need to be replaced.
view full answer... - Best Cushioned Equalizer Replacement for Equalizer that is 6 inches WideThe absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part # MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be really happy with it. Then for an HD upgraded shackle kit that comes with brass bushings and wet bolts you'd also want the part # MR46ZR.
view full answer... - Dexter E_Z Flex Equalizer Upgrade for a 2004 Gulf Stream Ameri-Lite CamperReplacement equalizers # K71-654-00 are only part of what you would need. These equalizers require special shackle straps that are available in the kit which is what you would need. The kit is # K71-652-00. It comes with all the parts needed to upgrade the equalizers to a Dexter E-Z Flex system. Whether or not your axles are underrated for the trailer I cannot say for sure. There are several different 2004 Gulf Stream Ameri-Lite models, both 5th wheels and travel trailers, so if you can...
view full answer... - Dexter EZ Flex Cushioned Equalizer for Trailer with 4,500 lb AxlesBased on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part # K71-654-00 which is compatible with what you have and will do a great job improving ride quality.
view full answer... - Bolts for 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension SystemThe Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle # K71-654-00 you asked about will use the Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs # K71-358-00. If you want the replacement center bolts you will use # 007-003-01 and nut # 006-007-01.
view full answer... - Can Dexter E-Z Flex Equalizers K71-654-00 Be Used To Replace Equalizers On 2003 Jayco Designer 31RLSThere is a way to allow you to replace the factory cast equalizer on your 2003 Jayco Designer 31RLS 5th wheel trailer with the Dexter E-Z Flex Equalizers. Since your current equalizers are just over 6-1/4" long you will need to use longer shackle straps to make up the difference as the # K71-654-00 only work with equalizers up to 6-1/4" long. Since you mentioned your factory shackles are 2-3/8" long you can replace them with the 2-3/4" long # TRSL275 which will put you in the useable...
view full answer... - Dexter EZ Flex Kit for 2019 Winnebago 2401 RG to Replace TREQ104The replacement equalizer you can use to replace the # TREQ104 is the Dexter Equalizers for E-Z Flex Heavy Duty Rubber Suspension, part # K71-654-00. This is the correct size and capacity you'd need for your trailer to replace what you have currently.
view full answer... - Recommended Dexter E-Z Flex Equalizers To Replace 6" Equalizers On TrailerSince the horizontal mounting holes on your current equalizers are 6" apart on center I recommend the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle # K71-654-00 which has a width range of 5-1/4" - 6-1/4" which will fit your application perfectly. If you are wanting the new shackle straps to match you can use the # K71-652-00 which includes the equalizers, shackle straps, wet bolts, and everything else needed to complete the installation. I...
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Written by:
Laura H
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Randy
6/25/2023
It is still working great. I do not regret putting on these items , they have worked well for us.