Grease to Use in Dexter EZ Flex Equalizers

Question

Question:

What is the recommended Grease for the Dexter EZ flex equalizer leaf springs assembly and bolts?

asked by: Brian

0

Expert Reply:

For grease Dexter recommends wheel bearing grease in the EZ Flex Equalizers. For that we recommend the red grease part # L11390 which is the most heavy duty and best protecting.

expert reply by: Jameson C

0

Answer 1

I spoke to my contact at Dexter and he informed me that they recommend greasing the E-Z Flex equalizers every three months or 3,000 miles. I also attached a pretty helpful guide to how often trailer components should be maintained. For grease Dexter…

view full answer...

Answer 2

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 3

The Dexter E-Z Flex Equalizer that you are looking for is part #K71-652-00. I have attached a link to this product below that displays the current price and availability for you to check out.

view full answer...

Answer 4

I would be happy to help! Since the horizontal mounting hole measurement of the equalizers on your 2016 Winnebago 2351DKS is 5-1/2" there are a few different equalizer upgrade options. To determine which one will be best for you, you will need…

view full answer...

Answer 5

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The length Dexter posts for their leaf springs is the flattened length, so with the 072-042 having a length of 26" you would want to compare that to our 25-1/4" long springs as we measure their length with the spring relaxed. The 3-Leaf…

view full answer...

Answer 9

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Answer 12

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…

view full answer...

Grease to Use in Dexter EZ Flex Equalizers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching