How to Determine Which Over Under Axle Kit Would Be Needed
Question:
I have a weekend warrior fk1900 with 2 dexter 3,500 lbs axles. I am planning to flip them and at the same time install the ez flex system but am not sue how to determine which one I need for each side.
asked by: Charles
Expert Reply:
The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.
Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.
To pick out the correct EZ-Flex equalizers like the part # K71-654-00 that you referenced you will need to measure your current equalizers first. The height of this equalizer is 5-5/8 inches and the distance between the two side holes is between 5-1/4 inches and 6-1/4 inches depending on how compressed the equalizer is.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Shop: RV Refrigerator Roof Vent Cap and Base - 23-3/8" x 6-1/2" Cutout - White
- Search Results: refrigerator roof vent
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Review of Dometic White RV Refrigerator Roof Vent - DMC37FR
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Review
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-385-00 Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: leaf spring
- Shop: Suspension Enhancement
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Search Results: leaf springs
- Article: Double-Eye Trailer Suspension System Review
- Shop: Trailer Hitch
- Search Results: trailer leaf springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Trailer Wiring
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Search Results: equalizer
- Article: Trailer Wiring Diagrams
- Shop: Fifth Wheel Hitch
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Q&A: Choosing Between Lippert Equa-Flex Or Roadmaster Comfort Ride For 2018 Grand Design Momentum 351M
- Shop: Gooseneck Hitch
- Article: Most Popular Wheel Bearings