Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
(5 reviews)
Price: $465.72
In Stock
Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
Item # 8-214-8UC1
Retail:$494.21
Our Price: $465.72
You Save: $28.49
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-214-8UC1
- 8 on 6-1/2 Inch
- For 12000 lbs Axles
- Hub
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Oil Bath
- 5/8 Inch Stud
- 28682
- 3984
- Dexter
Hub fits 12,000-lb general-duty Dexter axles. Inner bearing (3984) and race, outer bearing (28682) and race, oil seal, cap, and lug nuts included. Oil bath system allows for easy maintenance. Drum and mounting bolts (7-103) not included.
Features:
- Trailer hub assembly fits idler axles
- Oil bath lets you check lubricant level without disassembling the hub
- Look through clear oil cap to check lubrication
- Bearings, races, oil seal, oil cap, retaining ring, and lug nuts are included
- Sturdy iron construction
- Hub is made in the USA
Specs:
- Application: 12,000-lb axles
- Bolt pattern: 8 on 6-1/2"
- Pilot hole diameter: 4-3/4"
- Wheel bolt diameter: 5/8"
- Weight capacity: 6,000 lbs
Bearing and Seal Information
- Bearings (included)
- Inner bearing: 3984 (2.625" inner diameter)
- Outer bearing: 28682 (2.25" inner diameter)
- Unitized oil seal (included): 10-56
- Inner diameter: 3.125"
- Outer diameter: 4.5"
- Oil cap kit (included): RG04-270
- 21-36 Cap
- 10-50 O-ring
- 46-32 Plug
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
8-214-8UC1 Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath - 8-214-8UC1
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
Hub fits 12,000-lb general-duty Dexter axles. Inner bearing (3984) and race, outer bearing (28682) and race, oil seal, cap, and lug nuts included. Oil bath system allows for easy maintenance. Drum and mounting bolts (7-103) not included.by: Mike 10/12/2023
Very knowledgeable thanks for the help
by: Lopaka11/16/2022
by: Arturo 01/31/2024
by: Shawn 03/10/2021
by: James 09/10/2021
5
5
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacement Bearings for Dexter Axles with 12000-lbs CapacityThe Replacement Trailer Hub Bearing # 3984 has an inner diameter of 2.625", so it's possible that it will work on your 12,000-lbs Dexter axle, but you'll need to know what bearings are in your hubs to confirm this is the correct replacement bearing. This bearing is designed to fit in Dexter hubs with part numbers: 8-216-5, 8-214-8, 8-217-5 and 8-272-5; the only hub we currently have available out of that group is the 8-214-8 with part # Dexter Trailer Idler Hub Assembly for 12,000-lb Axles...
view full answer... - What Weight Capacity is an Axle with 8 LugsThere really is a wide range of axles that could potentially be on this trailer. We carry hubs with 8 on 6-1/2" bolt patterns that can be used on axles anywhere from 5200-lbs capacity, like the # 8-219-4UC3-EZ all the way up to 12000-lbs like the # 8-214-8UC1. The best way to determine the axle capacity is going to be checking the spec sticker/plate that can be found towards the center of the axle. If you can't find a spec sticker, knowing the bearings, races and seals also may provide...
view full answer... - Hub Assembly for Big Tex Trailer With Tandem 12k AxlesWe do offer one 12,000 lb idler hub assembly which is the Dexter # 8-214-8UC1. This uses # 3984 inner and # 28682 outer bearings. Assuming you're using over the hub rotors like what is found in the # K2R1258L12 these will work as a replacement.
view full answer... - Parts Needed to Add Electric Brakes to Trailer With 12,000 Pound Air BrakesMore than likely you will be able to just add a brake flange and won't need to swap out the spindles. If by 12k air brakes you mean you have tandem 6,000 lb axles then you could use the Brake Mounting Flange for 3" Round Axle # 4-44-1. You will want to take this to an axle shop for installation since they will need the proper equipment to mount it. If you actually have 12,000 lb axles then we do not have a brake flange or spindle/brake flange that large. If you can't find either then your...
view full answer... - Will Dexter Idler Hub for 12k Axles Fit Lippert AxleMore than likely your Lippert axle uses the standard # 3984 inner and # 28682 outer bearing. I would double check to be sure. Assuming that is correct, the Dexter Trailer Idler Hub Assembly for 12,000-lb Axles # 8-214-8UC1 will fit.
view full answer... - How to Remove the Rotor on 12k Dexter Disc Brake KitWhen removing the rotor on your 12k Dexter disc brakes, all you need to do is pull it off of the hub assuming you have already removed the caliper. The only thing that secures it to the studs is the wheel and lug nuts when you put the wheel on. It is possible that yours is giving you some difficulty if dirt or rust has built up in some way, but you should still be able to take it off. Just be careful to not damage anything else when trying to break it loose. I have attached a video from...
view full answer... - Converting from Electric to Hydraulic Disc Brakes on 2019 Big Tex Trailer With 12,000 Pound AxlesThe Kodiak Disc Brake Kit # K2R1058D11E is for 9,000-10,000 lb Dexter axles. Assuming you have a standard duty Dexter or Lippert 12,000 lb axle, the correct kit would be the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6.5 - Raw Finish - Leaf Spring - 12K - Dexter/Lippert # K2R1258L12. This kit fits an idler hub assembly like the # 8-214-8UC1. You will need to verify which axles you have in order to make sure this will work, it is not for use with 12K HD axles. In addition to the disc brake...
view full answer... - Replacement Trailer Hub for Dexter 12k Hub 8-216Thanks for all of the info of your trailer hub, based on that the correct replacement hub is the part # 8-214-8UC1.
view full answer... - Dexter D120 Axle Replacement PartsYour Dexter D120 axle is rated for 11,999.80lbs, has a spring center measurement of 45.5" and track width of 74". It is an underslung axle that uses 3" wide 30" slipper springs rated at 6,000lbs each. The brakes are 12-1/4" x 5" electric brakes and the hub is an oil bath with 8 on 6.5" wheel bolt pattern. It was produced in March of 2000. Electric Trailer Brake Kit # AKEBRK-12 Dexter Trailer Idler Hub Assembly # 8-214-8UC1 Inner Hub Bearing # 3984 Inner Race # 3920 Outer Hub Bearing #...
view full answer... - Disc Brake Assemblies For Changing A 12,000LB Dexter Axle To Hydraulic Disc BrakesWe have the Kodiak Disc Brake Kit # K2R1258L12 that is designed to fit your 12,000lb Dexter axle. You will need to ensure that you have the Standard Duty 12,000lb axle as this kit will not fit if its a Heavy Duty 12,000lb axle. If you need help determining which you have please let me know your axle serial number that is on the information sticker for the axle or can also be found stamped in the axle tube on the rear of the axle on the passenger side. The Kodiak Disc Brake Kit # K2HR12A11-120DW...
view full answer... - Will The Dexter Trailer Idler Hub Assembly For 12K Axles Work With Disc Brakes.Yes, the Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-214-8UC1 will work with disc brakes.
view full answer... - Replacement Hub And Drums For Dexter 12K Axle We have the perfect idler hub set up for you! The Dexter Trailer Idler Hub Assembly for 12,000-lb Axles # 8-214-8UC1 has an inner bearing # 3984 and an outer bearing # 28682. The idler hub has a bolt pattern of 8 on 6-1/2 inches. The hub has an oil bath system that allows for easy maintenance. The Drum and Mounting Bolts # 7-103 are sold separately. The Kodiak Disc Brake Kit # K2HR12A11-120DW will not work with your 12K Dexter axle because this kit is only for a 12,000 ALKO axle. The...
view full answer... - Disc Brake Kit that Can be Used on Rockwell 12k Trailer AxleSince Dexter owns Rockwell now the correct parts you'd need to install disc brakes on a 12k Rockwell axle is the idler hub part # 8-214-8UC1 and the disc brake kit # K2R1258L12. The disc brake kit is sold per axle whereas the hubs are sold individually.
view full answer... - Disc Brake Kit and Hubs For 12,000LB Dexter General Duty Trailer AxlesThe Kodiak Disc Brake Kit # K2R1258L12 specifically is made for 12,000lb standard duty Dexter and Lippert axles. Each kit provides the rotor and caliper for one axle. This brake kit will mount to your Dexter Trailer Idler Hub Assembly # 8-214-8UC1. If you can provide me with additional information about your trailer and the brakes you have I can help you identify any other parts such as disc brake actuator or brake lines that you may also need.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.