bing tracking image
  1. Trailer Hitch
  2. Volkswagen
  3. Touareg
  4. 2009
  5. CURT
FITS 2009 Volkswagen Touareg
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13220
Retail:$424.95
Our Price: $268.85
You Save: $156.10
Trailer Hitch
Confirmed to Fit
2009 Volkswagen Touareg

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
Trailer Hitch 13220 - 6000 lbs GTW - CURT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
CURT trailer hitch for your 2009 Volkswagen Touareg are available from etrailer.com. Installation instructions and reviews for your Volkswagen trailer hitch. Expert service, and great trailer hitch prices. etrailer.com carries a complete line of CURT products. Order your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13220 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (88)
  • Q & A (0)
  • Photos

2009 Volkswagen Touareg - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 6000
  • Concealed Cross Tube
  • CURT
  • 600
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Volkswagen Touareg's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
    • Maximum tongue weight: 600 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty




etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13220 Curt Class 3 Trailer Hitch Receiver

Installation Details 13220 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
600 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Requires temporary removal of rear fascia and tail lights. No drilling required for installation , Requires temporary removal of bumper/fascia during installation , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13220

Average Customer Rating:  4.8 out of 5 stars   (88 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Installed this on my 2008 Porsche Cayenne build. Works as intended!



by:
2012 Audi Q7

I installed the unit on my 2012 Audi Q7 TDI - with Regards to the Trailer Hitch itself = A+. If you plan to install this yourself - pay attention to the 10 out of 10 on the difficulty scale when given the lack of details within the instructions. It took me a good 4 hours to complete, as I kept second guessing the basic instructions provided and searched the blog/youtube etc.. for needed details. The Q7 has 4 screws within each wheel well and 4- 10mm nuts that need to be removed from within the spare tire well. Once all these are removed you have to be very aggressive in order to pull away the Fascia from its wheel well clips/retainers. You must pull away from the vehicle (out to the side with a loud POP) and then towards the rear. There is a plastic support that holds the Fascia to the vehicle at the rear of the wheel wells - the bumper Fascia both clips in and has the screws attached that get removed -it is a tight fit and you cant be gentle. This is where a second pair of hands will help - the wiring harnesses (3 in total -rt side of vehicle) need to be disconnected while you hold the Fascia in the air - not quite long enough to set on ground without pulling things too tight. After the Bumper Fascia "Pops" off - everything is clear from then on.

I then trimmed the Access door/plate with a Dremel and Grinder to fill in all of the extra space (see Picture) - take your time with this = measure twice and cut once because you are on your own as there is no stencil provided.

Warning - The Curt Hitch Receiver does not replace the original/allow for the use of the original Audi Tow eye tool to be used. The tow eye access caps become useless - there are the 2 cap/flaps in the bumper.

Chris C.

4/20/2015

Hi Don,Great job on your Q7 and thanks for the details. It gave me the courage of going forward on this. I had put few hitches previously but this one didnt look that simple. Where did you get the wiring harness?I got mine2015 a few month ago and your experience and tips about this car will be very welcome too.ThanksChris



by:

Didn't fit properly once rear bumper facia was installed.

Etrailer Expert

Jenny N.

1/17/2024

I know that when reinstalling the foam pad that was on top of the bumper beam you will need to trim it as it can push up on the plastic of the bumper if not trimmed. Was this the location you were having trouble with or was it elsewhere?



by:
Audi Q7

I’m very pleased with the hitch. I was able to install it on my Q7 in about 1 1/2 to 2 hours, and found the installation instructions to be very straightforward. The trickiest part was removing the bumper cover, so I just took my time and followed the instructions carefully. So far, so good.



by:
2009 Audi Q7

Everything went great. From ordering to installation. The videos were extremely helpful. Knowing what tools I needed made install go smooth. It only took me 2 hours by myself to install.

Kevin J.

8/8/2021

This product is still the best purchase ever for my vehicle. People ask about it all the time and I tell them that I purchased it from etrailer and even installed it myself after watching the video on etrailers site. Even my auto dealer complimented my hitch even though I didnt purchase from them. Ive connected a simple bike rack to a more sturdier bike rack to haul 4 bikes. Love this hitch.



by:
2014 Audi Q7

The YouTube video from etrailer was great, it help me put my hitch on the Audi without no background on mechanic with the help of my 12 years son. I plan to use it for the bike rack
Thank you guys for the product



by:
2011 Audi Q7

Great Hitch, fit perfectly as advertised. Did it at night with my friend and it took us 2 hours to install . Perhaps in the light of day it would have been easier. Instructions need to be updated as there were screws we and nuts that we ended up figuring out ourselves. Better instructions would have allowed us to install even faster because part of the time was spend looking for the reason bumper wasn't coming off.

Can't wait to use my newly installed hitch. Thanks etrailer.com!!!



by:

I ordered this Curt hitch for the mighty Touareg (2010 V6 gasser). Shipping & delivery were great. I took an afternoon to install it using the great directions from Curt and from etrailer.com. The hitch is exactly what you expect, looks great, and doesn't stick out too far from the Touareg. We've used it for our 4-bike Hollywood rack (also bought here on etrailer) and it's been awesome!



by:
2010 Audi Q7

Installation is pretty straight forward and easy. It took me around 3 hours to complete the whole installation. It could have been a lot less if I had electric or pneumatic tools.



by:
2005 Porsche Cayenne

Took me half a day to install, but I'm in no hurry. The cutout for the plastic fascia on my 2005 Porsche Cayenne needed to be 4 x 8 inches.



by:

Fast Shipping, We received hitch a day sooner than expected. We have ordered parts from etrailer multiple times. Thanks, B&W Auto Body.



by:
2013 Audi Q7

Showed up damaged, in the box. Powder coating/paint scratched. Unsightly and a corrosion risk. I will sand and repaint -- a time investment I did not expect with a new product.

Etrailer Expert

Sierra K.

11/8/2021

Sorry to hear about this inconvenience. Customer Service will reach out.



by:
2015 Audi Q7

Satisfied with product and install video. Straight forward.



by:

Very easy to install - looks and works great! Much more attractive than the stock unit.

Matt

4/13/2023

Works great! I dont do a lot of towing but Ive had no issues



by:
2005 Porsche Cayenne

2005 Porsche Cayenne S - Easy bolt on solution, did it in 2 hours, nothing particularly tricky.. used a cutting wheel on the plastic to trim around hitch area while the bumper was off. other than that, it was totally straight forward. instructions are adequate, shipping was fast, and most importantly, i save $2200 by not taking it to the dealer. what a joke what they try to to charge.



by:
2008 VolkswagenTouareg

Great hitch! Install on '08 VW Touareg was easier than I had expected...etrailer you tube video install how to was invaluable! We've pulled trailers with ease to/from AZ and IL.



by:

Not only is this hitch a great product, etrailer.com is a great company. I work in customer support and I must say this is the best customer support I have ever seen. I ordered this hitch Friday night and it shipped Saturday. I received an email from etrailer.com literally an hour after the hitch arrived with a link to an installation video which made installation a breeze. The video was very detailed. Do not hesitate to order any of your towing products from this company.
Thank you etrailer.com,
Travis



by:

Nicely made and heavy duty. But pushing the bumper up like 1/4 inch. So make a dent on the bumper.
And a chain hookup is to deep. And sticking out on the side like big ears. So hard to mount the wiring harness.
Bottom line. It is BAD design.
I end to buy a use oem.



by:

I like the product. Josh from etrailer was very helpful! I install it myself and save a couple hundred if I bring it to a shop for install. It was installed on a 2006 Cayenne. You would have to trim your bumper to get the hitch to stick out. Overall I’m very satisfied with my purchase. I have not connected the wiring for the tail/turn/brake lights module yet. It’s going to be use for bike rack for now anyway.



by:

Product arrived in a timely manner, great price point. This is the third hitch and wiring kit I have purchased form etrailer.com. The help videos made it clear how to install hitch and wiring kits. I am a very satisfied customer and will returning here for the next one.



by:
2009VolkswagenTouareg

Packaged great! Very easy to install, I have taken the front bumper off. That helped me when taking the rear bumper off. I knew what to look for. I can not stress enough how easy this was to install!! The manufacture bumper came off no problems and the hitch looks great! Sorry I did not think to take a picture.... I guess I completed the job to quick! Save yourself some money and buy this and do it yourself. I spent around $***. The local hitch installer wanted almost $500.



by:

Solid piece. Tow trailer 3x a week for work and no issues after 1 year.



by:
2004 Porsche Cayenne

Fitment was perfect on a 2004 Porsche Cayenne Turbo. The bolts provided did not fit (wrong thread size), but the OEM bolts were fine. The bumper cover required trimming, I used a die-cutter air tool. The finished product came out looking extremely clean, like a factory fit... and was significantly more affordable than the OEM Porsche hitch.



by:

The Curt trailer hitch is super easy to install. Haven't towed anything with it yet. But it's definitely a solid hitch and I don't foresee any problems towing a trailer. I spoke with Dena on the phone and she handled a return and was a huge help in finding what I was looking for. She also followed up to check on the installation. Top notch customer service!



by:

Love my trailer hitch. It was easy to install and performed perfectly. Towed a 5X9 enclosed haul trailer from San Jose Ca. to Prescott Az.... no problem!


25
88
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch and Brake Controller Recommendation for 2004 Volkswagen Touareg
    If your 2004 Volkswagen Touareg came with a factory 7-way trailer connector, then the additional brake control harness that you will need must be obtained from a Volkswagen dealer. Unfortunately aftermarket brake controller manufacturers do not offer this harness. The harness will plug into a mating connector underneath the drivers side dash and splice to the wires coming from the brake controller. If your vehicle does not come with any trailer wiring you would need to first need to start...
    view full answer...
  • Correct Curt Trailer Hitch for a 2007 Audi Q7 for Bike Rack
    The correct Curt Trailer Hitch Receiver for a 2007 Audi Q7 is indeed part # 13220 which is a custom fit so no drilling into the vehicle is required and it has a hidden design for a very nice, clean finished install look. If you are looking to use the hitch for a bike rack and don't already have one, the Thule Hitching Post Pro part # TH934XTR is what I recommend as it offers the best value.
    view full answer...
  • Can Volkswagen Touareg Use Weight Distribution When Towing
    You will need to check your owners manual to see what the trailer towing capacity is for your Touareg. Many times the construction of a vehicle will restrict the amount of weight the vehicle can tow. I looked at a 2010 Touareg and the trailer hitch we have that is designed for the 2010 is the Curt Trailer Hitch, part # 13220. This is a Class lll hitch and it has a 2 inch receiver opening. A technical note states that you cannot use weight distribution with this hitch. You will want...
    view full answer...
  • How Much Fascia Trimming is Required to Install a Trailer Hitch on a 2015 Audi Q7
    Since your 2015 Audi Q7 is leased the amount of trimming is not relevant because even a tiny bit will void the contract and end up costing you the price of a new rear fascia panel! There is a panel in the center of the rear bumper fascia that will need a little trimming (it varies from vehicle to vehicle) and the only way to know how much for sure to trim is to have the hitch installed. I have linked the instructions for you. The best way to avoid having to pay for a new panel is to use...
    view full answer...
  • Trailer Hitch and 4-Bike Platform Rack Recommendation for 2004 Volkswagen Touareg
    We do offer several 2-inch Class III hitches for your 2004 Volkswagen Touareg and all can be seen on the link provided. The most popular among them is the Curt # 13220. Please note that the hitch you referenced, part # C13116, is not a fit for your 2004 model year. The Curt hitch # 13220 offers a substantial 600-lb tongue weight capacity, which is plenty for even a 4-bike platform carrier. I have linked an installation video for your review. Do please note that Curt requires you to use...
    view full answer...
  • Which Trailer Hitch Receiver Fits A 2013 Porsche Cayenne?
    The correct Draw-Tite Trailer Hitch for your 2013 Porsche Cayenne is the Draw-Tite # 75950 and is a great cost effective option that fits nearly the same as the Curt Trailer Hitch # C13116 you mentioned. Between these two hitches I would go with whichever hitch is the most cost effective at the time as they share the same 750lb tongue weight rating and 7500lb trailer weight rating and are very similar in overall design and installation. If you are planning on towing a trailer with your...
    view full answer...
  • Difficulty of Installing the Curt Class III Trailer Hitch Receiver, # 13220 on a 2010 Audi Q7
    I was an English and Literature professor a few years back so I know that academia can produce modern day renaissance men and women capable of installing a trailer hitch. With that said, the instructions state that the estimated install time for the Curt Class III Trailer Hitch Receiver, # 13220, is 3 hours (90 minutes for a pro). We have a scale of difficulty for installing trailer hitches. It is a 10-based scale with 1 being equivalent to attaching two legos together and 10 being quantum...
    view full answer...
  • Towing Hitch Recommendation for 2004 Volkswagen Touareg
    If you have a 2004 Volkswagen Touareg then we do have hitch fits for your vehicle like what you mentioned, but we don't have anything for a 2002 model as that isn't a year they had a Touareg to our knowledge. The hitch I'd recommend is the Curt part # 13220 though as its advantage is that it is made in the USA and has the better price currently. All other things are basically equal though as far as weight capacities and install time. For trailer wiring then the best option is the very...
    view full answer...
  • Trimming Required to Install Hitch on a 2010 Porsche Cayenne
    The Curt Hitch part # 13220 that you referenced has been confirmed to fit you 2010 Porsche Cayenne and does require fascia trimming. Basically the lower fascia will have to have an opening cut into it so that the hitch can stick through it like in the picture I attached. The picture is of an Audi Q7, but the trimming is basically the same.
    view full answer...
    Image 1 for
  • Converting a 4-Pole Wiring Harness to 5-Pole on a 2004 VW Touareg for Towing a Boat Trailer
    Since you have the # 118509, custom wiring installed on your Touareg, you have two options. You can use the 4 Pole to 5 Pole Trailer Wiring Adapter, item # 47515, or you can cut the 4-Pole connector off of the harness and splice in a 5-Way connector, item # HM37908. In either case the blue wire will be routed to the vehicle reverse light circuit, behind one of the vehicle tail lights, and spliced in there. Then, when the vehicle is in reverse, the electric lockout on your surge coupler...
    view full answer...
  • Comparing the Draw-Tite and Curt Trailer Hitch Options for a 2013 Audi Q7
    When comparing the Draw-Tite # 75950 and Curt # 13220 trailer hitch options for your 2013 Audi Q7 I recommend going with the Draw-Tite option. The reason being that per the Curt warranty a Support Strap # 18050 must be used for any non-trailer loads like a bike rack or cargo carrier. The Draw-Tite option does not have the same requirements. Even though the Draw-Tite has higher weight capacities you will still want to check your owner's manual for the weight capacities of your Q7. When...
    view full answer...
  • Parts Needed to Install a Trailer Brake Controller on a 2009 Audi Q7
    If your 2009 Audi Q7 does not have a factory trailer connector at the rear of the vehicle then you will need to install both the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT and the Universal Installation Kit for Trailer Brake Controller part # ETBC7 in order for a brake controller to work. Trailer brake controllers are universal and can be adapted to fit any vehicle with the correct wiring harness. The correct wiring...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2013 Audi Q7
    For your 2013 Audi Q7, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75950 over the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13220 because it requires a stability strap # 18050 for any non-trailer loads like bike racks and cargo carriers. The attached installation details do not state trimming is required for your model vehicle. If you will be towing or using a lighted accessory, I recommend the Curt Powered Tail Light Converter...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness for a 2005 Porsche Cayenne
    For a wiring harness that is compatible with your 2005 Porsche Cayenne, I recommend using the 4 Pole Trailer Connector part # C59496 as this wiring harness has an install kit included which will aid install. Unfortunately, we have not had a chance to make an video of this harness on a 2005 Porsche Cayenne yet. I spoke to my contact at Curt and he was not able to confirm nor deny the error code messages. The only hitch receiver available for your vehicle is the Curt Trailer Hitch Receiver...
    view full answer...
  • What Vehicles Does The Curt Trailer Hitch Receiver 13220 Fit?
    The Curt Trailer Hitch Receiver # 13220 you purchased for your 2010 Volkswagen Touareg will also fit the 2004 - 2006 Porsche Cayenne, 2007 - 2015 Audi Q7, 2004 - 2010 Volkswagen Touareg, and 2008 - 2010 Porsche Cayenne without the rear mounted spare tire. I included a few videos of this hitch being installed on different vehicles for you to take a look at.
    view full answer...
  • Availability Of Low-Profile Aero Roof Rack For 2013 Audi Q7
    About 3-1/2 - 4" will be added to the height of your 2013 Audi Q7's roof when using Thule WingBar Evo Crossbars Black - 47" # TH711220, Feet # TH710601, and Fit Kit # TH186025. This system attaches to your factory flush rails and provides a quiet aerodynamic crossbar setup with integrated t-slot channels on top for accessories. This is the lowest crossbar setup for your 2013 Audi Q7 with flush roof rails. I attached a demonstration video for you to check out. If this is not low enough,...
    view full answer...
  • Does Install of Hitch on a 2015 Audi Q7 Require Rear Fascia Trimming
    The rear fascia of your 2015 Audi Q7 will need to be trimmed so that it can be reinstalled after the install of the Curt Hitch part # 13220. There are many possible ways of making the cuts in the plastic appearance panel, including tin snips, a utility knife with a fresh blade or a Dremel tool. Your best bet would be to use whichever tool you feel most comfortable with. The cuts you make in the panel are meant to allow the hitch to pass through it. I don't have a template for you to use,...
    view full answer...
    Image 1 for
  • Ball Mount to Tow a Jayco Trailer with Coupler 16 Inches From Ground with a 2012 Audi Q7
    We have yet to install Curt trailer hitch # 13220 on a 2012 Audi Q7 but on another vehicle that uses this same hitch it measured 18-1/2 inches from the ground to the top of the receiver opening. In that case you would use a ball mount with a 2-1/2 inch drop, or as close to that as possible, for a level coupler height of 16 inches. The tongue weight of the trailer will pull down some at the ball so I recommend a ball mount with a 2 inch drop such as # D-4, Hitch Pin and Clip, # PC3, or...
    view full answer...
  • Best Trailer Hitch and Wiring Harness for a 2008 Porsche Cayenne
    In order to tow a trailer with your 2008 Porsche Cayenne you are going to need a trailer hitch receiver, trailer wiring harness, and ball mount/hitch ball. For a trailer hitch receiver, I recommend the Curt Trailer Hitch Receiver part # 13220 as long as you do not have a trunk mounted spare tire. This is actually the only hitch we have for your vehicle. It has a Class III rating with a 2" receiver tube opening. The 6,000 lb gross trailer weight (GTW) and 600 lb (TW) would be more than sufficient...
    view full answer...
  • Electronic Trailer Sway Control System for 2009 Audi Q7
    You are correct that some trailer hitches are not rated for use with a mechanical weight distribution/sway control system, including the Curt Class III model # C13136 that you referenced. Please note this hitch does NOT fit your 2009 Audi Q7; it fits the Q5 from 2009 through 2017. This exclusion from using WD will be due to either the hitch's vehicle-specific design or the ultimate strength of the vehicle frame. In some cases components on the vehicle will require a hitch design that does...
    view full answer...
  • Weight Distribution and Brake Controller for a 2007 Audi Q7
    The hitch for the Audi Q7 does not have a weight distribution rating because the Curt hitch will not increase the weight capacity by adding the system as some hitches do. So you can install the weight distribution, however the weight capacity will stay at 6,000 lbs which is plenty for your application. As far as the brake controller, you will not have a controller installed in the vehicle, but you may have the vehicle pre-wired for a controller. This means there may be a harness from the...
    view full answer...
  • Is it Difficult to Install the Curt Class III Hitch on Volkswagen Touareg
    The only issue that I am aware of with this hitch is the relative complexity of the installation. The install actually is not very difficult, but the rear bumper cover and taillight assemblies need to be removed which tends to frighten some folks. The hitch includes the 12mm bolts, if your Touareg requires the 14mm bolts, it is perfectly acceptable to use the existing bolts that held the bumper beam in place.
    view full answer...
  • Hitch Recommendation for a 2015 Audi Q7 Quattro
    Yes, the Curt Hitch part # 13220 that you referenced has been confirmed to fit your 2015 Audi Q7 Quattro. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
    view full answer...
  • Installation of a Tow Ready Harness # 118509 On a 2004 Volkswagen Touareg
    I attached installation instructions for this T-One Connector w/Upgraded Circuit Protected ModuLite, part # 118509, below for you to check out. You will not need to remove the rear bumper for this install. Basically, you will remove the tail lights temporarily so you can access the the wiring harness for each of the tail lights and then you will wire this harness in line with the tail light harness and then you will ground a wire to the body of your 2004 Volkswagen Touareg and finally...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Andrew L
Video by:
Andrew L
Employee Lindsey S
Written by:
Lindsey S
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Ryan G
Test Fit:
Ryan G
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.