Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11276
Our Price: $159.93
Confirmed to Fit
2010 Toyota Prius
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (448)
- Q & A (0)
- Photos
- Used (1)
2010 Toyota Prius - Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Class I
- 1-1/4 Inch Hitch
- 2000
- Visible Cross Tube
- 200
- CURT
- Custom Fit Hitch
Perfect for light-duty towing, this custom, Toyota Prius trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11276 Curt Class 1 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11276
Average Customer Rating: 4.8 out of 5 stars (448 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Bruce 05/23/2024
2012 ToyotaPrius
The videos and printed instructions were a great help. The receiver fit my 2012 Prius perfectly, I mounted the Thule bike rack, my bike, and rolled down the Interstate rock steady.
I will recommend eTrailer to my fellow bike clubbers.
by: Ezekiel A.10/13/2015
2014 ToyotaPrius
I purchase two different products and installed both, back to back. I did not use a jack or a lift, so it took about 45 minutes to finesse this one into/onto my Toyota Prius. I needed a helper (wife) which made it much easier. This is for a bike rack. Ordered Friday and delivered Monday, fast, fast. Thank you.
by: Diana06/30/2018
2013 ToyotaPrius
Love it! This trailer hitch allows an upright bike rack to attach, with the addition of an adapter, to our hatchback style Prius. It is much sturdier than our old bike rack that leaned against the hatch window. The trailer hitch/bike rack combo allows us to get into the hatch without removing the rack. We travelled across Florida and back, 300 miles, with no problems. Your website was very helpful in determining the proper hitch and installation was easy. Thank you for a great product at a good price.
Diana
6/30/2019
Still great! Thanks for following up. Not many companies do that. Great customer service.
by: A. W.05/23/2020
I bought this hitch after watching the online videos by etrailer detailing the installation. They make it look a lot easier to install than my experience, but i was not using a lift and had never done it before. The price on this hitch was very good and it was shipped very quickly. It beat the tools that I ordered from another online retailer to do the install, in fact. The packaging was good as well, and protected the hitch. I included a picture of my installation, which admittedly does not show very much, but its a win for me. The hardest part of installation was dealing with the exhaust bracket. I plan on purchasing a bike rack and a cargo rack in the near future, maybe even a small trailer.
A. W.
5/24/2021
After a year there has been absolutely no problems with the hitch. My plans of cargo racks and trailers were derailed due to the crazy year 2020, but I did purchase an Allen Sports 2-Bike Hitch Rack. The hitch holds the very heavy bike rack heavier loaded very securely with little to no wobble just using the locking hitch pin I also bought. I have no complaints about the hitch.
by: Victor Y08/18/2014
2010ToyotaPrius
I installed it in 15 minutes with good video and instructions that are provided. Mounting tabs lined up perfectly to OEM holes using their upgraded bolts and washers.
Received it in 3 days after they sent me shipping confirmation and tracking number.
They should tape foam on the mounting tabs to prevent damage and puncturing through the box.
I like how it tucks up and hardly noticeable.
John
5/18/2015
is this a lowered prius?
Sundeep
8/1/2015
Hey Victor, were you able to do it at home or did you need a raised platform?
Victor Y.
8/4/2015
John it is not a lowered Prius, but with the tucked-up hitch, it gives it that look.
Victor Y.
8/4/2015
Sundeep I did it at work in the parking lot, I use the box to set the hitch on then pushed it under the rear and held it up with one arm while the other was threading in their supplied bolts.
by: William08/12/2020
2015 ToyotaPrius
Super easy to install and did it in about 45 mins without lifting the vehicle. Don't recommend that but show's you how simple both the hitch design and the Prius (2015) design is. Instructions provided is simple to follow and video links on the website helped.
William L.
8/25/2021
Thumbs up! Use it fairly regularly. Still recommend
by: Annette 10/13/2023
2013 ToyotaPrius
Etrailer pointed me to the correct hitch for my vehicle. The hitch arrived very quickly. I used Etrailer recommended installer ABG Fabrication and Jim and his crew were awesome. This hitch works perfectly for the bike rack on my 2013 prius. A very good experience all the way around! Thank you etrailer & ABG!
by: Charles 01/13/2024
Great customer service and very timely delivery. Clean and easy installation.
by: Tanner D.03/16/2020
After using this custom fit trailer hitch reciever for one year, I am loving it! It was easy to install and it has done exactly what I needed it to do and more! I also bought my vehicle specific trailer light wiring harness which was easy to install as well and continues to work great! I would definitely recommend both of these products!
by: Steve 10/15/2023
Everything fit as advertised without any alterations. It appears strong and handled my bike rack for Ebikes just fine. Good company to work with.
by: Matthew 11/24/2023
2012 ToyotaPrius
Installs easily and fits as advertised. I had the 2” receiver first and it was not possible to install in my 2012 Prius. Stick to the 1.25 and you’ll be set.
by: Vince B.07/17/2020
The hitch is great. Super strong and it has never loosened or worried me driving with a loaded bike rack on many miles of dirt and gravel roads. Highly recommend upgrading to a hitch if you were previously using a clip-on roof rack like me to carry bikes, which can be shaken loose on rough roads or high winds. Installation was straight forward after you find the right bolts to take out.
by: KDS02/19/2022
The service from eTrailer and the price is always the best around. This is the fifth hitch I have ordered from them and it has always been a great experience. The only issue I have had is that two of the hitches got dropped in shipping and bent. Unfortunately you can't tell it until the bolt holes don't line up under the car. In both cases I was able to simply use a floor jack to spread the ends back the 1/4 inch needed, but it just adds some annoyance. I love eTrailer prices and their service!
by: jeff08/11/2020
This hitch appears to be a much higher quality hitch/receiver than the U Haul one I bought for my minivan several years ago. I had some help with the installation with auto-tech students from where I teach because it is much easier to install it from a lift. If you are handy, you might be able to install it yourself using jack stands.
by: Peter03/21/2019
2015 ToyotaPrius
Purchased this for my "new" 2015 Prius and I'm very pleased by how easy it was to install and how nice it looks. My primary need for a hitch is to carry a bike rack, but I also have a small utility trailer that has been very handy when I need to carry a bulky load that won't fit in the Prius even when it's not all that heavy.
I had previously installed a Curt hitch on my 2009 Prius and had a bit of a problem where the bolt holes didn't quite line up (even though it was only off by 1/8 of an inch or so, it was a lot of work to "stretch" it by even that much to fit. So, I wasn't quite sure what to expect this time. But it turned out to be no problem at all - the holes lined up perfectly, making the installation quick and easy.
A few tips:
1) When removing the tow hook from the drivers side, make sure to carefully remove the bolt and socket driver. If you don't, they can fall down and get caught on the top side plastic underbody panel. That turned what would have been about a 30 minute job into a 60 minute one!
2) The video was very helpful. The installer in the video suggested putting some spray lubricant on the exhaust hanger to help get it back on. I initially found it impossible to remove, even with lots of effort to point that I as worried about damaging it. But a quick shot of silicon lubricant worked wonders - it slid right off to all access to the bolts, and the slid back on easily as well.
3) Be sure to use a torque wrench as described in the installation instructions. I had to torque it down a lot tighter than I would have guessed without the torque wrench.
by: John B., not the sloop09/30/2015
2010ToyotaPrius
First, let's make a comment on etrailer's service. I placed my order at 4:40 am. The item was shipped at 7:30 am. UPS attempted delivery the next day mid-morning. What would expedited service look like?!!
The Curt hitch is excellent quality. It took a little longer to install than anticipated, but once in it is great looking and very sturdy. The knuckle of the hitch sticks out about an inch to two inches beyond the bumper of my 2010 Toyota Prius. A couple of pictures are attached.
by: Michael07/05/2019
Such a easy install it took me only 20mins from the ground I did back both rear wheels on a bricks to give me more room underneath to install the hitch I recommend lubricant on bolts and muffler hanger, I didn’t have a breaker bar so I used a wheel lug t bar and used the 3/4 side to just loosen it then came back with 19mm ratchet and loosen and tightened it all up and torqued to spec , It’s really simple I watched the curt video install on you tube once and understood it . Im glad I chose the Curt because it was so simple to install great product I recommend buying from etrailer vs eleswhere online...my receiver hitch was delivered well packed with no problems I’ve heard complaints from other websites that delivery was received damaged or bent so the bold won’t line up . Do yourself a solid and go to etrailer you won’t regret it.
by: Diana06/08/2019
2013 Toyota Prius Plug-in Hybrid
I’m super excited to use the hitch I just got. The installation went fairly smooth with a big help from the video. It took less than an hour for the 2 guys who were helping me. I’m not sure I could have done it alone. The hardest part seemed like attaching the hitch on the passenger side because of the exhaust. The spec for this product says to torque it to 86 lbs. I hope that is enough to carry the load it is manufactured to claim. The hitch looks great and hangs as it should but I hope it’s not to low since I am already scraping the bottom of my car on shitty Bay Area roads. I like how it doesn’t stick out past the bumper much at all so I won’t knock my shins.
by: Betty05/12/2020
I ordered a trailer hitch for my Prius v. It came in a timely manner and well packaged. It was relatively easy to install. The instructions were unclear on removing a rubber holder for the exhaust, but I managed to install it without removing the rubber holder. I’m happy to have a hitch for my bike rack on my new (to me) car.
by: Vernon08/28/2017
ToyotaPrius
I highly recommend etrailer hitch and wiring harness They were both easy to install. The Prius pull the motorcycle camping trailer very well. You would not even know it was hooked to the car
by: Jo05/23/2018
2015 ToyotaPrius
Perfect fit, thanks for your user-friendly website! And thanks for the timely delivery also.
The Curt hitch was easily installed by a local shop that has installed "hundreds" of these on local Priuses.
The cargo carrier was pretty simple for this gal to assemble, but would have been even easier if I'd have had a good wrench and another person to assist. It's very sturdy and will be very useful.
by: Michael11/02/2018
2015 ToyotaPrius
I tried to install the hitch today but could not as per the instructions. The tow hook does not line up with the hitch, see pictures. I ended up installing without the hook but that is not how it should be. Please advice
Heather A.
11/2/2018
The tow hook is removed for installation of the Curt hitch part # C11276 hitch on a 2015 Toyota Prius. Where the tow hook is located will have two bolts. Remove those two bolts and the tow hook. The two hooks will be replaced by the hitch. I have attached a video on a 2015 Toyota Prius for your reference.
Helpful Links
by: Fred02/25/2015
2010ToyotaPrius
For a 2010 Prius
Very well crafted. It is a bit heavier than the other Hitch Receivers on the site, but looks way better. Everything was packaged nicely and came as promised.
Install wasn't bad either. I'm slender and fit underneath the car without car ramps and jacks. Just cut out a side of cardboard from the provided box and slide under. At around 45 lb. it's a bit tricky to hold up on your own. So a few house items to prop it up fixed that. 30min install time. MAKE SURE you have 17mm & 19mm DEEP Sockets and 6" extender.
by: WA6TT07/15/2012
2011 ToyotaPrius
It took over 2 hours for install for 2 reasons. First, the tools would not fit around the exhaust system and in the access slot. 3/4 drive equipment was too bulky. Second reason, an Important issue, the heat shield on my 2011 prius extends further aft than the video and to fit the rightside bracket correctly, the bracket must be sandwiched between the shield and the frame. It took alot of time bending the shield to get the bracket installed. The video is wrong, they just clamp on top of the shield and squeeze it against the frame. You don't want heat to transfer to the vehicle because the 12-volt battery is located in that area.
by: RichardM08/13/2016
2014 ToyotaPrius
Went on my 2014 Prius with no problems. Just needed to bend the heat shield back slightly to avoid trapping it under the hitch attachment passenger side. You do need a torque wrench and AV least 6" socket extension. Watch you don't lose the socket inside the plastic under shielding on the drivers side - use a magnet to coax it back if you do!
25
448
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Trailer Hitch Receiver and Draw-Bar For 2011 Toyota PriusI would be happy to help! The Curt Trailer Hitch Receiver # C11276 is confirmed to fit your 2011 Toyota Prius and has a 200lb tongue weight rating and 2000lb trailer weight rating so you will need to make sure your trailer does not exceed those ratings. For a drawbar Curt recommends the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 which has a 2-3/4" rise. For a compatible 2" hitch ball you will need the # A-82, and for a hitch pin and clip you will...
view full answer... - Hitch Recommendation for a 2014 Toyota PriusThere are pros and cons to both the Curt Hitch part # C11276 that you referenced and the Draw Tite Hitch part # 24847. If you are planning on using this hitch for carrying a cargo carrier or a bike rack I would go with the Draw Tite. Curt requires the use of a stabilizer strap like part # 18050 any time you carry a bike rack or a cargo carrier. Draw Tite does not have that stipulation so I would lean that way. Both of these hitches have the same 200 lbs tongue weight and 2,000 lbs trailer...
view full answer... - What Do Hitches for 2017 Toyota Prius V WeighThe EcoHitch part # 306-X7192 weighs 28 lbs. The Curt part # C11276 weighs 31 lbs and the Draw Tite # 24967 weighs 21 lbs.
view full answer... - What Bike Rack do You Recommend for 2 60-Pound E-Bikes on My 2011 Toyota Prius Hatchback?I have a great way to transport your 2 e-bikes that weigh about 60 pounds each. However, the Yakima FullBack 2 # Y02634 and all other trunk bike racks do not have the required weight capacity that you need to safely transport your bikes on your 2011 Toyota Prius hatchback. With that being said, exceeding the 35-pound weight capacity of the FullBack is extremely dangerous. For the doable route, I recommend using a hitch-mounted bike rack. A great rack that provides you with the capacity...
view full answer... - Concealed Style Class I Hitch Recommended for 2014 Toyota Prius VFor a 1-1/4 inch Class I hitch with a concealed crossbar like the Class III EcoHitch # 306-X7192 you'd looked at, I'd recommend the Draw-Tite # 24967. As you can see from the provided photo, the only portion of the hitch visible from the rear is the receiver tube and the safety chain loops. The remained of the hitch is concealed behind the rear bumper and fascia. When we installed the hitch on a 2016 Prius V, we found that when installed, the hitch pin hole in the receiver tube was recessed...
view full answer...
- Parts Needed to Tow a Trailer with a 2014 Toyota Prius 4As far as whether or not you can tow a trailer with your 2014 Toyota Prius you will need to check the owners manual or with a Toyota dealer for the final say on that. Our understanding is that Toyota says that you cannot tow at all with your vehicle. With that said, we have seen instances where people will do this anyways and parts are available to do so. For a hitch you can use the Curt # C11276, which is a confirmed fit on the 2014 Toyota Prius. For the wiring I recommend using the...
view full answer... - Why Can't More Than 2 Bikes be Loaded on Toyota Prius with Class I Trailer HitchI'd be happy to help clarify! Basically what it boils down to is the strength of the hitch itself and physics. The Class I trailer hitches, like the Curt # C11276 for your 2014 Toyota Prius, are the lightest duty on the market and so they can't handle as much torque as the higher class hitches. If you were to use a bike rack like the Hitching Post Pro # TH934XTR (which weighs about 40 lbs) and load up 4 bikes weighing in at 35 lbs each you would still technically be under the 200 lb...
view full answer... - Can the Curt 4 Bike Rack 18030 be Used on a 2013 Toyota Prius VI do have options for you but the Curt 4 Bike Rack part # C18030 is not class I rated so even if you were to only carry two bikes I could not recommend you use this on the Curt Trailer Hitch Receiver part # C11276 for your 2013 Toyota Prius V. In order to use this bike rack you would need to install the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7192 which would also allow you to carry the maximum number of bikes for this bike rack so long as the weight of the bike rack and these...
view full answer... - Recommended Bike Rack And Trailer Hitch For Two E-Bikes On A 2011 Toyota Prius Thanks for the question, I'd be happy to get you sorted out! Starting with a trailer hitch, I recommend checking out the: -Curt Trailer Hitch Receiver # C11276. This is a class I (1-1/4" x 1-1/4") trailer hitch, that has a maximum tongue weight capacity of 200-lbs, and a maximum towing capacity of 2,000-lbs. Moving on to a bike rack that will work with the class I hitch, as well as your two bikes, I recommend checking out the: -Thule EasyFold XT Bike Rack for 2 Electric Bikes # TH903202. This...
view full answer... - Which Trailer Hitch Has Higher Ground Clearance For a 2012 Toyota Prius VThe Draw-Tite Hitch, # 24847, and the Hidden Hitch Trailer Hitch, # 60263 (no longer available), are basically the same hitch so they both have the same ground clearance and side profile. Draw-Tite and Hidden Hitch are sister companies that use the same design process for their trailer hitches. The top of the receiver tube for both trailer hitches will sit 4-3/4 inches below the frame rails on your 2012 Toyota Prius V. If you are planning on using the hitch for a bike rack or cargo carrier,...
view full answer... - Differences Between Curt and Draw-Tite Class I Trailer Hitches for 2012 Toyota Prius VThe Curt # C11276 and the Draw-Tite # 24847 Class I hitches share the same weight capacity, and the installation procedure is fairly similar. In actuality, the Curt weighs about 8 lbs more than the Draw-Tite hitch. The Curt hitch is constructed of round tube steel that's a bit larger in diameter than the square tube stock the Draw-Tite model is constructed of, which would account for the weight difference. Since both hitches have been tested and found to have the same weight bearing capacity,...
view full answer... - Differences in Measurements Between Trailer Hitch Receivers on 2015 Toyota PriusThe Curt # C11276 and Draw-Tite # 24847 are the two trailer hitch receivers confirmed to fit your 2015 Toyota Prius. Between the two the Curt is the one we have installed on a 2015 Prius. We've installed the Draw-Tite on a 2010, 2011, 2013, and 2014 but not a 2015. You'll need to keep this in mind when comparing measurements between the two. For example, even the Draw-Tite when installed on the 2014 measures 1-1/4 inches from the hitch pin hole to the outer most point on the bumper...
view full answer... - Availability of Replacement Install Hardware for Curt Hitch 11276 that Fits Prius VWe sell replacement hardware kits for the hitches we offer like the Curt hitch # C11276 that you referenced with the part # RHK but we don't offer just the washers by themselves. Hitch install hardware is considered one time use so with this kit you'd want to use all of the included hardware.
view full answer... - Can The Trailer Hitch for a 2010 Toyota Prius Be Used for Vehicle RecoveryThe Curt Trailer Hitch Receiver part # C11276 which is a fit for a 2010 Toyota Prius should be okay to be used to pull the car out of a ditch. The trailer hitch doesn't have to be rated for the weight of the vehicle since it's a rolling load. It uses the same attachment point as the factory tow hook does so there should be no issue. That said, you'd really have anther option. I recommend the Bulldog Winch 3/4" Shackle part # BDW20239 for vehicle recovery.
view full answer... - Will a Trailer hitch on a 2014 Toyota Prius V Hang Down Further than the ExhaustIt does appear that the trailer hitch for your 2014 Toyota Prius V does sit up as high if not higher than the exhaust pipe as you can see in the video I have linked showing installation. But in the video that is hitch # C11276. It should be the same on the Draw-Tite hitch though, # 24847. The 2014 Prius V is not designed for towing so if using the hitch for an accessory such as a bike rack or cargo carrier make sure that the accessory is rated for use with a Class I trailer hitch. Also,...
view full answer... - Can a Yakima Bike rack for a Class II Hitch Fit in a Curt Class I Hitch on a 2014 Toyota PriusCurt Class I trailer hitches do not have that stop in them. That stop is there to prevent accidental overloading of a Class I hitch. It allows only Class I compatible accessories to be used. In terms of bike racks a Class I hitch is only rated for a maximum of 2 bikes. The reason isn't the weight but rather how far that weight is from the receiver. A third or more bikes will create too much leverage on the hitch receiver and can damage it and the vehicle. I have actually seen it happen;...
view full answer... - Recommended Trailer Hitches For 2015 Toyota Prius Plug-In And 2013 Toyota PriusWe have one trailer hitch that is designed to work with the 2015 Toyota Prius Plug-In Hybrid. That trailer hitch is the Curt Hitch, part # C11276. This is a Class l hitch and it has a 1-1/4 inch receiver opening. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps, like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt. The Draw-Tite hitch, part # 60263 is designed to fit the Prius and...
view full answer... - Comparing Trailer Hitches that Fit a 2017 Toyota Prius vWe currently carry four trailer hitch receivers that fit your 2017 Toyota Prius v and the best one for you depends on what you're using it for. For example, the EcoHitch, part # 306-X7192, is the best option if you're going to be using the hitch to carry a cargo carrier or bike rack because the hitch pin hole sits closer to the rear bumper so whatever is in the hitch has a higher chance of clearing the bumper. It's also the only one that's a 2 inch receiver and there are more hitch accessories...
view full answer...
- Hitch Recommendation for 2015 Toyota Prius for Carrying Bike RackFor a 2015 Toyota Prius hitch I would recommend the Draw Tite part # 24847 for the reason you mentioned. It doesn't require a stabilizer strap like the part # 18050 when carrying a bike rack like the Curt # C11276. We have never heard of a trailer hitch ever effecting fuel mileage. The bottom of your vehicle is designed to provide the least wind resistance as possible, but realistically a hitch isn't going to make a difference. The most popular bike rack we carry that has been confirmed...
view full answer... - Is Curt Strap # 18050 Compatible With Hitch # C11276 on a 2012 Toyota Prius Hatchback With SpolierThe CURT Trailer Hitch Support Strap, Part # 18050, is a universal strap that should be compatible with a 2012 Toyota Prius when used in conjunction with the CURT Trailer Hitch Receiver, part # C11276. This support strap will provide additional stability and safety for a hitch-mounted bike rack. If you have concerns about the strap putting pressure on the spoiler you can route the strap to the bottom edge of the rear door rather than the top. I have attached a link to a brief video that...
view full answer... - Trailer Hitch Recommendation for a 2013 Toyota Prius Plug-In HybridAt this time, the only trailer hitch listed as a fit for the 2013 Toyota Prius Plug-in Hybrid is the Curt Class I Trailer Hitch, # C11276. The Draw-Tite and Hidden Hitch trailer hitches have not been confirmed to fit your vehicle. The Curt hitch is very similar to the Draw-Tite and Hidden Hitch trailer hitches. The only significant difference is that Curt's warranty requires the use of a stabilization strap, like part # 18050, for all non-trailer loads such as bike racks or cargo carriers. If...
view full answer... - Recommended Trailer Hitch Receiver for a 2011 Toyota Prius to Carry a Bike RackThe 2 trailer hitch receivers that will fit your 2011 Toyota Prius are the Curt # C11276 and the Draw-Tite # 24847. The best choice for you is the Draw-Tite option because when we installed it on a 2011 Prius we found the ground clearance to be 12-1/4 inches as opposed to the Curt's 11 inches. They both have a measurement of 2 inches from the center of the hitch pin hole to the furthest edge of the bumper so you will not have to worry about it sticking out. The other thing to note is that...
view full answer... - Can I Use A 2" Hitch Acessory With The Curt C11276 Hitch On A 2015 Toyota Prius?Hello Duco. The best course of action really depends on what you intend to do with the hitch. If you plan to tow a small trailer, you can simply buy a ball mount that is compatible with the 1-1/4" hitch. If you have a bike rack that goes with a 2" hitch, things get a bit more tricky. There are adapters like the # HTAD which will convert any 1-1/4" receiver to a 2" receiver. The only downside is that using an adapter like this will decrease the tongue weight capacity of your hitch my 50%....
view full answer... - Hitch Comparison for a 2012 Toyota Prius V Trailer HitchIf you check out the picture I attached you can see what your 2012 Toyota Prius V would look like with either the Draw-Tite Hitch # 24847 or the Curt Hitch # C11276 would look like once installed. As you can see both of them hang about the same distance from the bottom of the vehicle and will be the same in terms of visibility. Both of these hitches will be largely out of plain sight, but will be somewhat visible. Either hitch would work well for you, but Curt recommends that you use...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Robert C
Edited by:
Dan D
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Jonathan Y
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ezekiel A.
10/12/2016
It has performed as my intended use. I have only used this for attaching a bicycle rack and holding 2 bicycles.