Hitch Comparison for a 2012 Toyota Prius V Trailer Hitch

Question

Question:

Between the Curt hitch and the draw tight which one fits tighter to the bumper under the car. I want the one that is the tightest to the bumper so it cant be seen.

asked by: Paul

0

Expert Reply:

If you check out the picture I attached you can see what your 2012 Toyota Prius V would look like with either the Draw-Tite Hitch # 24847 or the Curt Hitch # C11276 would look like once installed. As you can see both of them hang about the same distance from the bottom of the vehicle and will be the same in terms of visibility.

Both of these hitches will be largely out of plain sight, but will be somewhat visible. Either hitch would work well for you, but Curt recommends that you use a stabilizing strap like the part # 18050 when you carry a non-supported load such as a bike rack or a cargo carrier with their hitch. The Draw-Tite does not require the strap be used but it would not be a bad idea to use one.

I attached instructions and installation videos for you to check out also.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The EcoHitch Hidden Trailer Hitch Receiver #306-X7178 is a great hitch for your 2012 Toyota Prius and will be able to handle the 300 lb weight of your motorcycle and the motorcycle rack (if the 300 lbs you mentioned includes both), but I'm not…

view full answer...

Answer 2

Draw-Tite trailer hitch #24847 has a square cross tube and a little bit different design than Curt hitch #C11276 which has a round cross tube. Both bike rack and hitch manufacturers agree that on a Class I trailer hitch the maximum capacity is 2…

view full answer...

Answer 3

The Curt #C11276 and Draw-Tite #24847 are the two trailer hitch receivers confirmed to fit your 2015 Toyota Prius. Between the two the Curt is the one we have installed on a 2015 Prius. We've installed the Draw-Tite on a 2010, 2011, 2013, and…

view full answer...

Answer 4

It does appear that the trailer hitch for your 2014 Toyota Prius V does sit up as high if not higher than the exhaust pipe as you can see in the video I have linked showing installation. But in the video that is hitch #C11276. It should be the same…

view full answer...

Answer 5

The issue you are having with your Yakima Highlite 2 hitch-mount bike rack #Y02438 has to do with an incompatible hitch class designation. This Yakima rack is classified as a Class II bike rack, meaning that it can be used in a Class II hitch. The…

view full answer...

Answer 6

I believe you are talking about the 1/4" nuts and bolts that are a part of the hardware that comes with the EcoHitch Hidden Trailer Hitch #306-X7178. I took a look at the installation instructions and the purpose of that hardware is to use only…

view full answer...

Answer 7

Curt Class I trailer hitches do not have that stop in them. That stop is there to prevent accidental overloading of a Class I hitch. It allows only Class I compatible accessories to be used. In terms of bike racks a Class I hitch is only rated for a…

view full answer...

Answer 8

Yes, the Curt Trailer Hitch Receiver part #C11276 which is a fit for your 2015 Toyota Prius Plug-In Hybrid will work with the Bauer Revolution Swing-Away Bike Rack. You don't really need to worry about whether or not the Bauer Revolution…

view full answer...

Answer 9

The best hitch for you will depend on what you were wanting to use it for. If you were planning on simply using the hitch as a mount for a bike rack (due to the capabilities of the Class I hitch, you will need a Class I rated bike rack and will be…

view full answer...

Answer 10

Yes, that note is accurate. A Class I trailer hitch receiver is limited to only 2 bikes regardless of the amount of weight it's carrying. This is due to the exaggerated force caused by the additional leverage from the bikes being further away…

view full answer...

Answer 11

I'd be happy to help clarify! Basically what it boils down to is the strength of the hitch itself and physics. The Class I trailer hitches, like the Curt #C11276 for your 2014 Toyota Prius, are the lightest duty on the market and so they…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Hitch Comparison for a 2012 Toyota Prius V Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching