Can a Yakima Bike rack for a Class II Hitch Fit in a Curt Class I Hitch on a 2014 Toyota Prius
Question:
We recently installed the Curt # C11276 on our sons Prius. Well later visit him and plan to use our Yakima bike rack on it. So, we tried that Yakima on our own Drawtite hitch receiver and discovered a bump about 3inch into the receiver, that stopped our rack from fully inserting. After a half hour of grinding I removed it so the Yakima fit. Do you know if the Curt on our sons Prius also has that bump / stop inside the receiver? Ive asked him to check, but dont trust that he knows what to look for.
asked by: Warren B
Expert Reply:
Curt Class I trailer hitches do not have that stop in them. That stop is there to prevent accidental overloading of a Class I hitch. It allows only Class I compatible accessories to be used. In terms of bike racks a Class I hitch is only rated for a maximum of 2 bikes. The reason isn't the weight but rather how far that weight is from the receiver. A third or more bikes will create too much leverage on the hitch receiver and can damage it and the vehicle. I have actually seen it happen; receivers tilted downward 45 degrees from overloading.
You should also be aware that Curt does require the use of stabilization strap # 18050 when using the Class I hitch on the Prius with anything other than a trailer per their warranty requirements. I have linked a video showing how the strap works.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Trailer Wiring
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Roof Rack
- Shop: Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Shop: Transmission Cooler
- Shop: Floor Mats
- Q&A: Yakima Highlite 2 Bike Rack and Trailer Hitch Compatibility on 2011 Toyota Prius
- Q&A: Hitch Comparison for a 2012 Toyota Prius V Trailer Hitch
- Q&A: Purpose of Small Nuts and Bolts in EcoHitch for 2014 Toyota Prius
- Q&A: Why Can't More Than 2 Bikes be Loaded on Toyota Prius with Class I Trailer Hitch
- Q&A: Differences in Measurements Between Trailer Hitch Receivers on 2015 Toyota Prius
- Q&A: Trailer Hitch and Wiring for a 2012 Toyota Prius
- Q&A: Will the Bauer Revolution Bike Rack Work With a Curt Class I Hitch On a 2015 Toyota Prius
- Search Results: kuat nv 2.0
- Video: Review of Curt - Hitch Bike Racks,Hitch Cargo Carrier - 18050
- Video: Curt Cam Buckle Stabilizing Strap Test Course
- Video: Curt Cam Buckle Stabilizing Strap Review
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller