Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13135
Our Price: $182.61
Confirmed to Fit
2015 Subaru XV Crosstrek
Hybrid models
non-Hybrid models
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (388)
- Q & A (0)
- Photos
- Used (1)
2015 Subaru XV Crosstrek - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- 2 Inch Hitch
- Class III
- 3500
- Visible Cross Tube
- CURT
- 525
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Subaru XV Crosstrek's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not intended for use with weight-distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13135 CURT Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
525 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
525 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately
Complete Towing Package for 2015 Subaru XV Crosstrek
Package Price:$349.41
2015 Subaru XV Crosstrek Owners Who Purchased This Trailer Hitch Also Bought...
Popular XV Crosstrek Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13135
Average Customer Rating: 4.8 out of 5 stars (388 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Definitely worth it!!05/07/2024
Pretty simple install and very good instructions! I just used the hitch for the first time carrying a bike rack and it works perfectly and everything is snug!
by: Keith04/24/2021
Rather simple to install. There a [online] video for explicit direction. It’s a good assist assistant. Plan to use this for my mtb and my moto, and possibly even a small trailer...
Keith
4/26/2022
I don’t know how to retract my last post, maybe an admin can do it. I was referring to my moto rack, not the curt hitch. The hitch is A+and no issues!! Highly recommend it!
by: Justin 04/29/2024
2013 SubaruXV Crosstrek
Arrived on time and an easy installation in less than 30 minutes.
by: Peter in Napa07/15/2017
2017 SubaruXV Crosstrek
High quality hitch I just installed on a Subaru Crosstrek 2017. I followed all the instructions and viewed install videos. My only suggestion.... small one.... in the 2016 install video, it shows the fishwire kept on the driver side bolts, which I did while I struggled with getting the passenger side nuts on the bolts. This proved to be very helpful in preventing the driver side bolts getting accidentally pushed into the frame. The 2017 video does not show this and the guy uses an pneumatic die grinder. I used a Dremel with a stone wheel that did the job very nicely. Rust-oleum paint on the bare metal. I purchased a 1/2" torque wrench for this install.... wow!... glad I had it, but my arms are a bit sore now. After that experience, I hope others realize that just a ratchet and socket are not going to be enough. The hitch is solid in place and I'm very happy with the purchase.
Peter N.
7/16/2018
Terrific hitch, solid as day one.
by: Tom08/27/2018
SubaruXV Crosstrek
This hitch is prefect for our Subaru Crosstrek. It looks nicely centered, the workmanship of the product is excellent, and strength is awesome (more than what we need for our bike rack etc.) The video instruction and the bolt fishing tool made the job easy. I did it by myself, no lift to hold the hitch up etc. and took me about 1/2 hour, taking my time. And I am not very coordinated. I did let the exhaust pipe hold up one end of the hitch while I fished the bolt and attached the nut on one side.
Tom
8/27/2019
This hitch is still Perfect for our Subaru Crosstrek, We have used it many times during the year and it performed perfect.
by: Ben04/16/2021
2016 Subaru Crosstrek
They expect you to widen the hole in the frame of your car to install this. Yeah that’s right, by design the supplied parts do not fit your car. It’s 2021 and that’s the best these morons could come up with. 30 minute install time is not even close. Do not buy unless you plan on having someone install it for you.
Heather A.
4/19/2021
The hitch is a custom fit for the Crosstrek however the holes in the frame will need to be slightly enlarged to fit the hardware through. We have had customers successfully complete this install at home with a simple metal file even though the instructions recommend a die grinder.
by: Emily Durb04/23/2017
2014 SubaruXV Crosstrek
This hitch is great! I use it on a Subaru Xbox crosstrek. Was simple to install I did it myself. I mainly use it for a hitch bicycle rack but I have pulled a small [rental] trailer. I will definitely be a repeat etrailer customer for my future cars.
Emily D.
4/24/2018
No longer have the vehicle, hitch was so great a bought a new one from etrailer for the new vehicle. Loyal etrailer customer here.
by: Judy Johnson10/12/2014
The trailer hitch was extremely easy to install, the instructions were simple. I'm a girly girl and was able to install this hitch.Great price and the hitch came to us incredibly fast. We got emails prior to the receipt and after delivery. Great customer service. I would not hesitate to order from these guys again. Product very well made. Ready to take this on the road.
Annie R.
2/26/2015
Thanks, Judy. Im a dirty girl, too. The lady who sold us our Crosstrek suggested we take it to U-Haul or another place to have someone put on a trailer hitch for us, but I knew I could do this myself. I look forward to receiving and installing my trailer hitch. Happy Trails.
by: Darryl03/19/2018
2014 SubaruXV Crosstrek
Ordered the Curt Trailer Hitch Receiver and Curt T-connector vehicle wiring harness for my Subaru Crosstrek. Everything was received in a timely manner and installation was easy. The videos that are available for both products were spot on and made the installation process extremely easy. Only issue I had was the welding on the frame made the back screws harder to install but other than that everything went well. Great customer service at etrailer.com.
by: Miguel 02/27/2023
2015SubaruXV Crosstrek
Exactly as described
Miguel
2/28/2024
This product has been great! I have definitely put it to use and has been very durable and reliable.
Jerred H.
2/28/2024
@Miguel
Happy to hear that Miguel! Thanks for the positive review.
by: John 08/05/2023
2014 SubaruXV Crosstrek
Good fit for the Subaru XTrek. It was a straight forward attachment to the car. I was able to do it by myself without raising the vehicle. I just raised it up to the mounting on the frame with the help of some wood blocks.
by: H. Dixon05/30/2016
2016 SubaruXV Crosstrek
I've put a hitch on an SUV before but it bolted into threaded holes. I had just purchased a 2016 Subaru Crosstrek and wanted a hitch to give me towing/carrying options. I liked the look of this class 3 hitch. I was a bit hesitant on the fish wire process you use to get the bolts and plates setup. I took a few minutes and watched the install video Easy-peasy! If you've got the tools they list on the install instruction you're good to go.
by: Kelly dooley07/16/2014
O my god ,this hitch is a tank what a well built trailer hitch. At first I was wondering how I was gonna install it since I don't have a lift so I put it on my face and lifted it into place. "Perfect" and o man those wire leaders for feeding the the 1\2 inch and 7\16 bolts "wow man" fantastic could not have installed it without them..
Thanks man
Your on my Christmas card list. : )
by: Vicki M.05/28/2014
2014 SubaruXV Crosstrek
Hitch arrived very promptly, was high quality, and extremely easy to install. Subaru wants $425 just for parts, plus installation. This was a bargain and easy to do yourself.
Paulette W.
6/30/2014
Hi Vicki!1 Did you use the 2 hitch?2 What is the brand of your bike rack?Thanks so much
Anonymous
7/1/2014
Yes, mine is a 2 inch receiver. This is the new bike rack from Kuat. Pricey, but well made and super easy to load bikes. This part took away my rattle and made the rack not wobble at all.
by: JR03/31/2014
Subaru
Hitch was delivered as described. All parts were there and no problems. Very Good instructions to install it yourself. I would recommend having another person with you to help lift the hitch if your installing it yourself. I used my floor jack which helped get the hitch in position for the four bolts. Good video for this installation on my Subaru Crosstrex made all the difference. The biggest thing would be leveling the hitch front to back in my opinion.
by: Kyle11/11/2020
2017 Subaru Crosstrek
Very pleased with this purchase. Item was shipped and received very quickly. Easy install. Some of the videos show the technicians dropping the exhaust system- this is not necessary for this hitch receiver. The only modification that needed to be done is the widening of one of the holes on the car frame. I did this with a $7 round file from the home depot. I'd also recommend having a second hand to hold the hitch receiver in place while you bolt it in- it weighs around 35lbs.
by: Subaru Cross Trek Owner12/29/2016
2015SubaruXV Crosstrek
Great trailer hitch. Installation was easy with no problems. Quality of welds and finish are very good. I would buy a Curt hitch again.
by: Ken V.02/16/2014
2014 SubaruXV Crosstrek
Priced right and installation on my 2014 Subaru Crosstrek was quick with help of the online videos. My hitch was shipped the same day I ordered & I received it 2 days later.
by: Matthew01/13/2022
2017 SubaruXV Crosstrek
Installed on a 2017 Subaru Crosstrek. From start to finish, it took under an hour by myself. Build quality is great and looks very good on the car. etrailer got the hitch from their warehouse to my front door in 3 days! Fair price and efficient company. Definitely will recommend.
by: Brandon R08/22/2014
Volkswagen Jetta
E trailer was awesome with the shipping. This hitch was easy to install. It only took about 45 minutes to install. My one complaint is that there was not a parts list. All of them where there but you had to use common sense to figure out where they when.
by: Rob R. 07/26/2017
2017 Subaru Crosstrek
Hitch and wiring kit shipped right away and fit great. Installation was easy and only took about 30 minutes. Looks great too!
by: John c clark08/24/2017
Its a bit heavy think I should have got the 1 1/2 in version just hauling my bike and occasionally 15 gal of gas cans. A lot of extras weight to be halling around how about an aluminum one strickley for light applications
by: Gerald09/18/2021
Very high quality product. Very straightforward instructions. The fish wire method for the mounting bolts was perfect. The wiring harness was easy and worked perfectly. Highly recommend product.
by: Joseph04/01/2022
Subaru
Great trailer for my Subaru cross trek. Easy to order, install, and perfect with my 1up bike trailer.
Joe L.
4/2/2023
It’s been a year and it’s still solid. Definitely a great buy.
by: Shane02/22/2017
2016 Subaru Crosstrek
Instructions and video for the hitch and wiring are spot on. Took me about an hour and a half to install both. Would have taken less time if my tools were organized!!
25
388
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Is Curt Trailer Hitch C13382 Best Hitch for 2018 Subaru CrosstrekFor your 2018 Subaru Crosstrek the Curt hitch part # C13382 is the best option overall. It has higher towing capacities, is mostly hidden, and isn't priced too high like some of the other options. If I were in your situation this would be the hitch I would buy. Then for trailer wiring the part # C56040 is the correct harness for an easy install.
view full answer... - Replacement Hardware Kit For Curt Trailer Hitch Receiver C13135 To Install On 2016 Subaru CrosstrekTo get the hardware needed to install the Curt Trailer Hitch Receiver # C13135 on your son's 2016 Subaru Crosstrek you will need to order the Replacement Hardware Kit # RHK. You will need to enter the hitch number(13135) when ordering to ensure you get the correct kit for your receiver.
view full answer... - Comparing Kuat NV and Sherpa Hitch-Mount Bike Racks for 2016 Subaru Crosstrek Non-HybridWhen we installed Curt 2-inch hitch # C13135 on a 2016 Subaru Crosstrek we did find that the hitch pin hole was positioned 2-1/2-inches from the rear edge of the bumper cover. This is a fairly close placement and this means you will not need too much clearance from a bike rack in order for it to clear the bumper. A rack that offers at least 4-inches of clearance from the hitch pin hole should be just fine since this gives you 1-1/2-inches of space between the bumper and the rack. The Kuat...
view full answer... - Will Curt Receiver Hitch C112863 for 2013 Subaru XV CrosstrekWhile the hitch manufacturers do not provide specific measurements for the frame brackets on the # C11286 Curt 1-1/4 inch trailer hitch, you are correct that the hitch will sit below the bumper on your 2013 Subaru XV Crosstrek. When you look at the design of the hitch, the receiver opening is in line with the cross tube, which means you will be able to see the cross tube running right below the bumper. Curt has a couple representative pictures in their instruction sheet that should...
view full answer...
- How to Pick Out a Ball Mount for a 2013 Subaru XV Crosstrek with a Curt HitchTo pick out the correct ball mount to use with your Curt Hitch part # 13135 on your 2013 Subaru XV Crosstrek you will need to determine what rise/drop you will need to tow your trailer level. Check out the FAQ article I attached that details how this would be done. Once you determine that check out the link I attached that has all of the ball mounts we carry that would fit your hitch where you will be able to select the rise/drop you need from the facet on the left.
view full answer... - Are Spacer Blocks Required for the Install of the Curt Hitch C13135 on a 2015 Subaru XV CrosstrekThe install instructions for the Curt hitch part # C13135 say to use the spacer blocks to level the hitch "as necessary". If the hitch sits level without the blocks then there's no reason you would have to put them in.
view full answer... - 2 inch Trailer Hitch that Fits 2012 Subaru ImprezaWe have 2 inch hitches that fit your 2012 Subaru Impreza with the part # 306-X7241 for if you have a sedan or the # 306-X7211 for if you have a wagon but the Curt you mentioned does not fit your vehicle so I cannot recommend it for you.
view full answer... - Curt Hitch Recommendation for a 2015 Subaru XV CrosstrekThe difference between the two hitches you referenced is the vehicles they fit. The part # C13135 fits 2013 - 2015 Subaru XV Crosstrek and would be the correct hitch for your 2015 Subaru XV Crosstrek. Whereas the part # C13144 fits 2014 - 2016 Subaru Foresters. I attached an install video for the # C13135 for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2...
view full answer... - Will EcoHitch Invisi Hitch & Kuat NV 2.0 Bike Rack Fit 2013 Subaru CrosstrekGood question, and the receiver measures a full three inches from the face of the hitch to the back of the EcoHitch Invisi which fits your 2013 Subaru Crosstrek, which is the following part: - EcoHitch Invisi Trailer Hitch Receiver # 306-X7203 More specifically, the # 306-X7203 measures 2-1/2 inches from the front of the receiver to the center of the hitch pin hole, and 1/2 inch from the center of the hitch pin hole to the back of the receiver. So the muffler will very likely interfere...
view full answer... - Bike Rack and Trailer Hitch Recommendation for a 2014 Subaru XV Crosstrek The correct Curt Trailer Hitch Receiver for your 2014 Subaru XV Crosstrek is part # C13135. The Curt Trailer Hitch Receiver part # C13409 that you referenced is for a Subaru Forester and will not fit your Subaru XV Crosstrek. I have attached an install photo/video for you as well. For a bike rack, the Saris Freedom 2 Bike Platform Rack part # SA4412B that you were looking at is an excellent choice because it will work with a ton of different types of bike frames. It is also super lightweight...
view full answer...
- Trailer Hitch Receiver for 2015 Subaru Crosstrek and Tongue Weight CapacityI do have thoughts, but start with the trailer hitch receiver fits for your 2015 Subaru Crosstrek if you don't have one yet, for which the best option is the etrailer Trailer Hitch Receiver # e98838. This hitch is very similar, with the same installation and clearances as the other hitches that fit your '15 Crosstrek, the Draw-Tite # 76084 and Curt # C13135, but with a matte black finish that will help hide any scratches to help maintain a clean aesthetic. As for the tongue weight, you...
view full answer... - Where to Attach the Stabilizing 18050 Strap on a 2013 Subaru XV CrosstekIf I were you I would strongly consider getting the Curt Hitch # C13135 over the Curt Hitch # C11286. The # C13135 is a Class III hitch that has a 2 inch opening and has much higher towing capacities than the Class I hitch with a 1-1/4 inch opening # C11286 that you referenced. Not only will you have a higher capacity in case you need to carry more than 2 bikes on a bike carrier (Class I hitches are limited to only 2 bikes) you will have a much larger range of accessories that will work...
view full answer...
- Do Frame Holes have to Be Enlarged to Install Curt Trailer Hitch on 2014 Subaru XV CrosstrekYou need to use the mounting hardware that is included with Curt trailer hitch # C13135 or it will void the hitch warranty. The access hole only MIGHT need to be enlarged. It is possible that you will not have to enlarge it at all. If you do need to enlarge the hole and choose to drill (or any other method that can remove paint/coating from the frame) then you should be able to prime and paint over it after the hardware is run through the access hole. Or Subaru might have small batches...
view full answer... - Will the Yakima RidgeBack Bike Carrier Fit a Curt Trailer Hitch on a 2014 Subaru XV CrosstrekTechnically, yes, the Yakima RidgeBack, # Y02457, will fit the Curt trailer hitches available for the 2014 Subaru XV Crosstrek. But there are 2 hitches for the vehicle: # C13135 is a Class III hitch with a 2 inch receiver opening. Hitch # C11286 is a Class I hitch with a 1-1/4 inch receiver opening. The Yakima rack will fit both but it is made for Class II and III hitches, not Class I hitches. If you have a Class I hitch I recommend a different rack such as the Trailhead, # S63360. If...
view full answer... - Equipment Needed to Tow 1500 lb Brake Equipped Trailer with 2014 Subaru CrosstrekYou don't mention whether you already have a trailer hitch, so we'll begin there. I'd recommend a Class III hitch, because if you also wanted to use the hitch for accessories like a bike rack or a cargo carrying tray, you'll have greater capacity and many more possible options. I'd recommend the Curt Class III hitch, part # C13135. The hitch includes all necessary installation hardware. You'll also need a ball mount and trailer ball. For the ball mount, I'd recommend part # 2753 and #...
view full answer... - Ground Clearance Change by Installing Curt 2-Inch Class III Hitch # C13135 on 2014 Subaru CrosstrekThe Curt 2-Inch Class III trailer hitch that you referenced, part # C13135, is a great choice for your 2014 Subaru Crosstrek to allow use of your Yakima Holdup 2 Bike platform carrier # Y02443. At right you will find a link to an installation video for the hitch that provides useful dimension information including the height above ground for the top of the receiver tube once installed - about 14 inches in the case of the 2014 Crosstrek. I also linked two helpful articles for hitch installation. Your...
view full answer... - Do Hitches that Require Fishwiring Include the Fishwire in the Included Install HardwireYes, if fishwiring is required to install any of the hitches that we carry we include the needed fishwire to complete the install. I attached an install video for the Curt hitch # C13135 that you referenced to the right for you to check out as well.
view full answer... - Trailer Hitch and Wiring Recommendation for a 2015 Subaru XV CrosstrekThe Curt Trailer Hitch part # C13135 that you referenced has been confirmed as a fit for your 2015 Subaru XV Crosstrek but it does not include the trailer wiring. For trailer wiring you would need the # C56040 which has also been confirmed as a fit. I attached install videos for both products. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or...
view full answer... - Trailer Hitch Ground Clearance Comparison Between Curt and Eco-Hitch InstallationsAny trailer hitch whose receiver tube is positioned below a vehicle's rear bumper is going to reduce ground clearance and approach angle to some degree. The actual clearance lost depends on many factors including wheel/tire size, passenger and cargo load in the vehicle and the general condition of the suspension. On a newer vehicle like your 2016 Subaru Crosstrek it is not too likely that your suspension is sagging but this does matter on older vehicles. The two 2-inch hitches you referenced,...
view full answer... - Replacement Hardware Kit For The Curt Class III Trailer Hitch # C13135No, the Replacement Mounting Hardware # C75JR is not going to fit the Curt Class III Hitch # C13135. If you are in need of a hardware kit for the # C13135 hitch, we can provide that with Part # RHK. When you go to the page for # RHK you will see a box where you will need to enter the item number for the hitch that you have. Just enter the part number C13135 in this box before you add the RHK to your cart.
view full answer... - Will the Curt Class III # C13135 Trailer Hitch Fit a 2014 Subaru XV Crosstek HybridI have spoken with my contacts at Curt Manufacturing, and their Class III trailer hitch # C13135 is confirmed as a fit for your 2014 Subaru XV Crosstrek Hybrid as long as it has a single exhaust. This is a Class III rated hitch, that is has a towing capacity of up to 3,500 pounds and have a tongue weight of 525 pounds. Please note that Curt recommends the use of their Stabilizing strap # 18050 for all non-trailering loads. Please check your owners manual to make sure that your vehicle...
view full answer... - Can a 23x47 Carpod Cargo Carrier Fit on a 2017 Subaru Crosstrek?One of the important measurements to make sure that the 23x47 Carpod Cargo Carrier w/ Sidewalls, Lid, and Bag - 2" Hitches - 450 lbs # M2200-01-02 is compatible with your 2017 Subaru Crosstrek is the measurement from the center of your hitch pin hole to the closest edge of the carrier. For the Carpod Cargo Carrier to fit with the bumper clearance, the bumper should measure less than 4 inches from the hitch center pinhole. With this carrier, you will not be able to access the rear hatch...
view full answer... - How to Carry 2 E-Bikes on a 2017 Subaru CrosstrekThe 1-1/4" receivers we have listed for the 2017 Subaru Crosstrek are Class I hitches. As such, the Saris SuperClamp EX, part # SA4025F, will not work because it is compatible with Class II and above. If you'd like to use this bike rack, I suggest using a higher class hitch like the Curt Class III, part # C13135. It has a 2" receiver, so it will be able to work with the SuperClamp EX. Alternatively, you could use the Thule EasyFold XT, part # TH903202, with your 1-1/4" hitch. It supports...
view full answer... - Using Anti-Seize Compound on Trailer Hitch Mounting BoltsUsing anti-seize compound on the hitch mounting bolts is not necessary. Because of the lubricant properties, you'd need to lower the torque specs in order to not over tighten the bolts. You would be better off installing the bolts dry and tightening them to the torque rating mentioned in the hitch installation instructions. Using something like a Loctite Blue Threadlocker, part # LT37643 would be a better idea. The waxy texture makes threading bolts in place easier, but gets tacky as it...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Video by:
Andrew L
Video by:
Kathleen M
Video Edited:
Jacob T
Video Edited:
Dustin K
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Andrew S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Keith
4/26/2022
Yes. It’s been a year since I purchased this rack for my car. Things of note. I purchased and installed stiffer springs for the rear of my car HUGE and better difference. I also replaced the wing nut mounting bolts to the ramp with a cotter pin system. Works great and easier on and off. It’s the only complaint I would have had. The wing nut retention design gets thumbs down from me.