Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13432
Retail:$183.95
Our Price: $116.73
You Save: $67.22
Confirmed to Fit
2019 Jeep Wrangler
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (79)
- Q & A (0)
- Photos
2019 Jeep Wrangler - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- 2 Inch Hitch
- Class III
- 3500
- No Cross Tube
- CURT
- 350
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch bolts onto your Jeep Wrangler's frame with no welding required. 6" Long receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Overall length of receiver tube: 6"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Measurement from front bracket plate to hitch pin hole: 3-7/8"
- Measurement from front bracket plate to end of receiver tube: 5-3/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13432 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Tech Tip
Hitch receiver tube sits beneath rear bumper to remain out of the way when accessing the cargo area of the vehicle. No drilling required for installation , Exhaust must be temporarily lowered for installation , Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Complete Towing Package for 2019 Jeep Wrangler
Retail:$360.32
Package Price:$222.72
2019 Jeep Wrangler Owners Who Purchased This Trailer Hitch Also Bought...
Popular Wrangler Trailer Hitch Accessories
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Defective
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13432
Average Customer Rating: 4.8 out of 5 stars (79 Customer Reviews)
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 6" Long receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.by: Scott 03/14/2024
Ordering was easy, the “how to” videos gave me the confidence to install items myself. Great communication, never once wondered where my order was. Placed order on a Saturday not expecting it to be processed until Monday. Pleasantly surprised to see emails that my order was received and being prepped for shipping!
by: Brian01/21/2024
Was missing one washer. Otherwise, grea t.
by: Jim04/27/2020
The hitch is very solid. Great price. It was easy to install and fit perfectly to the bottom of the bumper. We will be towing our jet ski to the lake this summer!
by: Jeeper 10/20/2016
2011 JeepWrangler
Just installed. But was very easy on Our 2011 Jeep Wrangler 2 door. Little tight getting bolts between exhaust but a little tap with little hammer and they went right in. Don't tow much it's a "just in case purchase "
by: Javier G02/05/2015
2008 JeepWrangler
Excellent product. Arrived in two days. Great American company. Very easy to install. Did not need to lower the muffler
by: James 03/10/2023
Thanks for the YouTube video on the installation super product
by: David 02/01/2021
JeepWrangler
Very easy install. Love the fact that it is recessed under the bumper and out of the way when accessing the rear storage area of our 2020 Jeep Wrangler.
by: Mark 06/29/2020
2015 JeepWrangler
Just got it installed, much easier than expected. Product seems solid. If you're installing on a Jeep Wrangler with a tire on the back, then you'll also need to get an extender so you can clear the tire.
Mark
6/30/2021
After a year of use its working great and no sign of rust or other wear.
by: Charlee07/23/2020
Looks great on my JKU, easily installed. Adam in customer service was super helpful!
by: Dale 11/16/2021
2017 JeepWrangler
Great product. Fairly easy to install but a little problem with getting the bolts in through all of the holes and it all lining up. I did not drop my muffler so it made it a bit more difficult. However fairly easy and a great, quick install!
Dale
11/22/2022
Good as far as I know. Sold the vehicle.
by: Danny 04/22/2020
JeepWrangler
etrailer scores a 5Star rating again. I have used them multiple times and they are always professional. I’ve only needed assistance with one product and when I called I talked to an actual person! He helped me fix my problem and the hitch was perfect. My latest hitch for my Jeep Wrangler looks great as well
by: Gretchen06/28/2018
2017 JeepWrangler
I ordered a hitch receiver to be installed on my 2017 Jeep Wrangler Unlimited from the place that was installing it, but the one they ordered stuck out about 4” past my bumper. I immediately expressed dissatisfaction with how it looked & pointed out that it was a hazard whenever I open my rear door. I was ecstatic to find this hitch receiver on etrailer.com. I can’t wait for it to be installed tomorrow. Thank you etrailer.com.
by: Joey 06/12/2023
Good product...well built.....easy to i nstall
by: Brian 08/06/2018
The hitch is nicely finished. The welds look good and it was very easy to install. It took all of 10 minutes to put on.
Brian
8/6/2019
This hitch is still looking good
by: Randy08/28/2018
2018 Jeep JK Wrangler
I bought this trailer hitch after I watched an etrailer video on how to install it. It just arrived today and I am totally pleased with it. I’m going camping this weekend and I needed the hitch to haul some stuff on my trailer hitch rack. Thanks for the help.
by: Thomas 09/19/2022
Solid, well made bolt-on hitch. Perfect fit. Easy 15 minute installation.
by: Libby06/16/2020
Product was shipped literally within 2 hours of purchase! Easy to install per my brother. Will be using to pull a jet ski. Highly recommend. Sturdy hitch and wiring! Thank you etrailer!
by: Sara06/26/2020
Works great. The hitch was easy to install. Dropping the exhaust turned out to be more challenging. Buy the tool to make that part smoother.
by: Brandon10/18/2018
2018 Jeep JL Wrangler Unlimited
I haven't used the hitch, but it is a Curt. It is solid and heavy and the normal high quality you get from Curt. That's about all I can say about the product since I haven't installed or used yet. I can give a review of etrailer. Read some good reviews and not so good reviews of etrailer. Decided to go with etrailer and give them a try. Same day shipping, fast shipping and courteous service. My experience overall; excellent.
by: Christopher06/25/2020
Heavy duty and high quality. Instructions were straight forward and installation was simple. Took about 20 minutes to install on a 2018 Jeep Wrangler JK. Definitely recommend.
by: Loren02/04/2022
Very impressed with the hitch and ease of installation, look forward to many years of reliable service.
by: Cheryl06/12/2019
2018 Jeep JL Wrangler
Received the item in exceptional time and in perfect condition. Installing the hitch was easy and I will always order from etrailer in the future definitely referring everyone. Their customer service was superb!!!!!!
by: Kirk05/11/2018
2007 JeepWrangler
Great customer service very easy to order hitch receiver bolted up perfect took around 30 minuets looks great would definitely recommend this company thanks
by: Flor107/27/2017
JeepWrangler
Couldn't get bolts through bumper on Jeep Wrangler ended up taking off cover to clean up holes took about 20 minutes. After that clean fast installation total time less then a hour.
25
79
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Difference Between Curt Class III Hitch # 9883544 and # 13432 for 2013 Jeep WranglerYou are correct, part # 9883544 and # 13432 are the exact same hitch. Curt gave us a special price on a large supply of that hitch, so we're selling those as part # 9883544. Once that supply is depleted, it'll revert to the original # 13432 part number and price. The hitch will not fit on any Limited Edition Models like the Rubicon 10th Anniversary. To complete your towing system, you might also be interested in the following: Trailer wiring harness, part # 118416 Ball mount, part # D-4 2...
view full answer... - How Far Apart Are the Mounting Plates On the Curt Hitch 988354 For a Jeep WranglerThe Curt Trailer Hitch Receiver part # 13432 is a confirmed fit for a 2007-2020 Jeep Wrangler/Wrangler Unlimited so if this is what you have then I can confirm compatibility but if you have another year/model just let me know what that is and I will see if we have a trailer hitch for you. That said, the width of the channel which will also match the width of the rear bumper support is 3-1/8" which you can see in the attached photo.
view full answer...
- Which Hitch Extender will Give a Jeep Wrangler Additional Clearance to Install Bike RackMost commonly with Jeep Wrangler the hitch extender part # 13432 does the trick as it adds 8 additional inches to the hitch tube. But that will depend on the bike rack you have and how much clearance your setup calls for. You should note that hitch extenders do cut the capacity of the hitch they are installed on in half. I attached a review video that shows the extender being used on a Wrangler just like yours.
view full answer... - Distance Between Mounting Brackets on Curt Trailer Hitch 13432 for a 2007-2016 Jeep WranglerThe opening on the mounting bracket part of Curt trailer hitch # 13432 is 3-1/8 inches. I have included a picture showing this for you. This is a custom fit hitch so if you have a 2007 to 2016 Jeep Wrangler or Wrangler Unlimited this hitch will fit.
view full answer...
- Saris Hitch Bike Rack Recommendation for 2015 Jeep WranglerSaris and Thule both make great bikes racks. For a hitch mounted bike rack the Saris SuperClamp EX part # SA4025F would be a great option for carrying two bikes. With a Curt hitch like the part # 13432 installed on your 2015 Jeep Wrangler this would be a great option that would clear the rear spare. I really like the SuperClamp as it is made in the USA, is lightweight at 35 lbs, and only touches the bikes at the tire. I attached a review video for this rack on a similar Wrangler as yours.
view full answer... - Curt Trailer Hitch Receiver For a 2023 Ford BroncoThe Curt Trailer Hitch Receiver # 13432 you found is for Jeep Wranglers and will not be able to fit your 2023 Ford Bronco. While we currently have not received any updates that the Curt Trailer Hitch Receiver # C76WR which fit the 2021 and 2022 model years will fit on the 2023. I took some measurements of the bolt hole pattern which you can compare to the holes on your Bronco to verify that it will fit. The inner holes are separated 3-1/4" and the outer holes are 2-3/8" on center from the...
view full answer...
- Recommended Trailer Hitch Receiver For 2016 Jeep Rubicon Hard Rock EditionMy Curt representative tells me that according to the information they have, the # 13432 will fit your Hard Rock 2016 Jeep Wrangler Rubicon. This fit to the frame and not the bumper so it will not interfere. Since you already have the wiring harness, you will just need a ball mount to start towing with this hitch. For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black # BWTS10038B. This will give you an adjustable hitch to tow...
view full answer... - Recommended Trailer Hitch And Platform Bike Rack For 2015 Jeep Wrangler UnlimitedThe trailer hitch on the 2015 Wrangler Unlimited in the video is the Draw-Tite trailer hitch, part # 75515. There is a pretty big difference in trailer hitches for the Jeep. The # 36424 has a distance of 7-1/2 inches from the center of the hitch pin hole to the back of the rear-mounted spare tire. Another hitch we offer is the Curt, part # 13432 that has a distance of 12-1/2 inches from the hitch pin hole to the back of the spare. That does mean a lot when considering a hitch mounted...
view full answer... - 2017 Jeep Wrangler Hard Rock 75th Anniversary Hitch FitMy Curt representative tells me that according to the information they have, the # 13432 will fit your Hard Rock 2017 Jeep Wrangler Rubicon. This is a great hitch confirmed to fit your vehicle that is at an amazing price so we would recommend it for you. If you'll be using the hitch for towing purposes, you'll also need the following products to complete your towing system: Trailer wiring harness, part # 118416 Ball mount, part # C45030 1-7/8 inch trailer ball, part # 19260 or #...
view full answer... - Compatibility of etrailer Trailer Hitch Receiver on 2016 Jeep Wrangler Unlimited Backcountry BumperWe have a customer who installed the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13432 to a 2016 Jeep Wrangler Unlimited Backcountry bumper. I've attached a photo to show that install. It is the same exact bolt pattern as the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98856 so I'm confident it will fit and work well for you. For your wiring harness I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
view full answer...
- Trailer Hitch Receiver to fit a 2017 Jeep Wrangler Unlimited 75th Anniversary EdiitonI'm fairly certain the 75th Anniversary edition of the 2017 Jeep Wrangler Unlimited uses the same rear bumper as the Rubicon model. If I'm wrong about this let me know and send me a picture of your rear bumper if you can. This way I can make a correct recommendation. If I'm correct then we have two hitch receivers that actually fit your Jeep even if our site says they only fit the "Standard Rear Bumper" Curt receivers # 13432 as well as the Draw-Tite # DT78MR all fit for you. I've confirmed...
view full answer...
- Hitch Cargo Carrier, Cargo Bag, Light Kit and Lock Recommendations for 2014 Jeep WranglerSelection of a hitch cargo carrier that will fit nicely at the back of the vehicle is best done after taking one simple measurement. Measure from the center of the hitch pin hole back to the rear-most part of the vehicle, which is typically the back edge of the rear-mounted spare tire on a Jeep like your 2014 Wrangler. You can refer to the linked article for illustration of how to measure. The Cetrailer hitch cargo carrier # e98874 sits 9-1/2 inches from the hitch pin hole when folded...
view full answer... - Does Yakima HoldUp Bike Rack Clear Spare Tire of 2019 Jeep Wrangler UnlimitedThe answer really depends on the trailer hitch you have on your 2019 Jeep Wrangler Unlimited, so you may want to measure the distance from the center of the hitch pin hole to the edge of your spare tire to find out for sure. The Yakima HoldUp 2-Bike Rack # Y02443 measures 12" from the center of the hitch pin hole to the closest wheel holder. So for example, if you had the Draw-Tite Trailer Hitch # DT78MR, it is 5-1/2" from the center of the hitch pin hole to the edge of the spare tire...
view full answer... - Trailer Hitch Solution for Rockwood RVThe Curt hitch # 13432 is designed for a Jeep Wrangler but we do have the MultiFit RV Hitch # 13703 which would work great for your Rockwood as it was designed to fit the standard RV frames and has a wide frame width range. A frame mounted hitch is much more secure than one that attaches to a bumper.
view full answer... - Trailer and Flat Towing Recommendations for a 2017 Jeep WranglerSince base plate kits are only rated and tested for pulling the vehicle itself, in your case your 2017 Jeep Wrangler, it is not safe to use it for towing - especially when it has to be modified. You will want to install a rear mounted trailer hitch receiver, like the Curt # 13432, if you are wanting to tow something as well as have a base plate kit installed. Because a base plate kit and a front mount hitch will mount in the same spot it is not possible to use both at the same time. You...
view full answer... - How to Mount 4-Way Connector with Curt Trailer Hitch # 13432 on a 2016 Jeep WranglerThere are a few different options for storing the Curt T-Connector # C55124 on your 2016 Jeep Wrangler. The first couple of options are exactly what you mentioned, you can let it hang there or zip-tie it, but either of these options don't look that great. We do have the mounting bracket # 18144 which can be mounted to the body of your Wrangler but I believe you are looking for something like the Easy Mount Bracket # C58001 which basically clamps around the receiver of your Curt Receiver...
view full answer... - Recommended Hitch for 2021 Jeep Wrangler Unlimited SportFor your 2021 Jeep Wrangler Unlimited Sport I recommend the # e98856 etrailer Trailer Hitch Receiver. This hitch is a custom fit for your Wrangler and has a maximum gross trailer weight of 3,500 lbs and tongue weight of 350 lbs. The rugged, matte black finish adds durability and gives the hitch a carbide-like appearance which helps hide any scuffs or dings. It also has the longer 9" receiver tube to help clear the spare tire with any accessories. If you plan on doing some towing, I recommend...
view full answer... - Does Curt Hitch # 13432 Come with Needed Install BoltsThe Curt hitch part # 13432 actually comes with all of the needed hardware to install including the bolts, washers, and nuts. The bolt size info is: 1/2-13 UNC,4-1/2,GRD8
view full answer... - Curt Trailer Hitch # C13392 And # 13432 TW and GTW Capacities Hey Jeff, I doublechecked the Curt Trailer Hitch Receiver # C13392 and # 13432 as they are labeled with their capacities and also reached out to Curt for confirmation. After speaking with Curt we found that their website incorrectly listed the capacities lower than they actually are. They should be fixing this issue and we'll have it properly labeled on our site as well and updated in our answer pages to avoid further confusion. The # C13392 is rated for 500lbs TW / 5,000lbs GTW The...
view full answer...
- Recommended Trailer Hitch and Trailer Wiring Harness for 2021 Jeep WranglerBecause of its longer receiver tube which helps hitch mounted accessories like bike racks clear the spare tire, I'd recommend the Curt # C13392 Class III hitch, which installs as shown in the linked video. For a trailer wiring harness, I'd recommend the Tekonsha # 118786, I'll also link to an install video for that. You'll also need a ball mount and trailer ball. If your Jeep is at stock ride height, the # C45010 ball mount with a pin and clip # PC3 would work great for you. For a 1-7/8...
view full answer... - Will Swagman Trailhead Bike Rack Allow Rear Door of Jeep Wrangler to OpenThe first thing you'll want to do is determine if the bike rack has a shank long enough to move it far enough away from the rear of the vehicle so the rack's upright won't hit the spare tire before the shank can be secured into the hitch. To find this out, there's an easy measurement you can take. Have a helper stand a straight edge (like a yardstick or a 2x4) vertically so it's flat against the rear face of the spare tire. Then, take a tape measure and measure rearward from the hitch...
view full answer... - Comparing Curt Trailer Hitches for a 2012 Jeep WranglerYou are correct, the # 9883544 was the same hitch as the Curt # 13432. There was a special promotion on trailer hitch # 9883544 for your 2012 Jeep Wrangler. The # 9883544 is no longer available. I have also linked a video showing installation of the Curt # 13432 for you. If you plan on doing some towing, I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For trailer wiring you can use # 118416. I have linked...
view full answer... - Is the Curt Trailer Hitch Receiver # 13432 Compatible with a 2013 Jeep WranglerYes, the Curt Trailer Hitch Receiver # 13432 that you referenced is confirmed to fit all models of the 2013 Jeep Wrangler that has the standard rear bumper. Please note that if there are obstructions on the cross member, such as excess welding, will need to be removed for installation. To complete your towing setup on your Wrangler you will also need a ball mount, hitch ball, and trailer wiring. A great ball mount and hitch ball option is the etrailer.com 2-3/4" Rise or 4" Drop Ball...
view full answer... - Recommended Curt Trailer Hitch for 2018 Jeep JL Wrangler SportYou can install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118786 on your 2018 Jeep JL Wrangler Sport so long as the flat tow wiring kit you used does not connect behind the tail lights, which you will need in order to install Harness # 118786. The diodes themselves will not be an issue as they are essentially just a gateway. A trailer hitch is also compatible with a flat tow set up and since you mentioned a Curt hitch I strongly recommend the Curt Trailer Hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Test Fit:
Adam E
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
2/2/2022
Perfect. Low profile look great