bing tracking image
  1. Trailer Hitch
  2. Honda
  3. Pilot
  4. 2008
  5. Draw-Tite
FITS 2008 Honda Pilot
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75599
Retail:$361.95
Our Price: $200.92
You Save: $161.03
Trailer Hitch
Confirmed to Fit
2008 Honda Pilot

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
The best technical support and full trailer hitch installation instructions. Great price Pilot trailer hitch and expert service. Honda Pilot, 2008 trailer hitch by Draw-Tite are available from etrailer.com. For expert service call 1-800-940-8924 to order your Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75599, or order online at etrailer.com.
  • All Info
  • Reviews (463)
  • Q & A (0)
  • Photos

2008 Honda Pilot - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 3500
  • Concealed Cross Tube
  • Draw-Tite
  • 350
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

Fully welded Honda Pilot trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75599 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87454 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75599 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
350 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation , Hitch will fit with full size spare tire stowed under vehicle




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75599

Average Customer Rating:  4.9 out of 5 stars   (463 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2003 HondaPilot

Installed on '93 Honda Pilot in 1 1/2 hours while installing new Tow Ready 4- Flat Universal Mounting Bracket (118149) and Tow Ready One Connector wiring harness (118336). Easy install, did not have any trouble cleaning out those previously unused bolt holes on the right side, used wire brush and penetrating lube. Installed tow bar supported on top of grand kids red wagon with side rails, no extra hands required. Did not have to lower exhaust, only removed tow hook from left side. Fits snugly with good clearance from frame and muffler. Tow bar can barely be seen except for receiver.

Cw

3/27/2015

No complaints one year after install, very pleased with this product. Ive since ordered trailer tires and wheels from etrailer.com, great company to buy from, quick delivery too.



by:
2012 Acura MDX

I installed the hitch on a 2005 Acura MDX. Was easy, and with another set of hands a breeze to install. The quality of the hitch is great, and my experience with other Draw-Tite hitches in the past has been terrific. This is the fourth hitch I have ordered from Etrailer, and each time has been a pleasure. Their selection, ease of website, and great customer service keeps me coming back.
My next project is a 2012 CX7. I'll be in touch soon!

Thanks Again,
Frank D

Mark

3/3/2015

Frank, I have a 2006 MDX. Did you have to modify the bumper trim kit in any way for the receiver?

Patrick B.

3/4/2015

There is a under-vehicle fascia piece that has to be removed for the hitch to be installed. You do not have to cut or modify it though, so if you ever want to remove the hitch, it can be re-installed. Check out the video I linked to, the 2:20 mark or so.


by:

Arrived the day after I ordered it, my son installed it for me without any problems. I purchased to use with a bike hitch to carry grandkids bikes.

Julie

3/15/2021

Great!??I use it all the time! Just used yesterday for bikes and will use this summer to haul kayaks



by:

Excellent Product. Installation was so simple product could be renamed Draw-Tite's Easy-Fit hitch. Etrailer.com installation video was also excellent. The Installation Team (Me [67 years] & Wife {64 years]) reported absolutely no problems during installation. Highly recommend both Etrailer.com website and Draw-Tite trailer hitch. Post-installation photo attached (just before cranking spare back up into place and tools cleanup). Hitch wiring was subsequently installed, also with no problems. Etrailer.com installation video for that was also excellent.



by:

Easy order process, great price and great product.
I'm much slower than the other guys in terms of time to install. Took me about 4 hrs, with no helper. Time was significantly extended by having to clean up the 3 threaded bolt holes on the passenger side. Had to rent tool from Auto Zone, and still took a lot of PB Blaster, wire brushing to even get the clean up tool to start into the lead in threads. Then was like 1 - 2 turns, back it out, and repeat.... for all three holes. ~2 hrs later, all the bolt holes were clean and easily accepted the new bolts.
Other than that, no real issues.
Great instructional videos for Receiver and Wire kit.
This is my second purchase from ETrailer, and will def be my online go-to site for all my trailer needs.



by:
Pontiac Trans Sport Van

I purchased the receiver for a friend that wanted to be able to minimize hauling everything inside and be able to transport a luggage carrier and bike rack when needed. She was very surprised at how easy it was to install. From online ordering to installation the process was very user friendly. Quality product and great service.



by:

Love the hitch! It went on relatively easily and looks great installed.

Not a hitch issue, per se, but I realized later I should have dropped the spare to make the install easier, since the spare appears pinched between the hitch and the rear body now that I cranked down all the bolts.

Also, install time was lengthened due to rusting of the uncovered threads on the muffler side of the vehicle. I used wd-40, the old bolts, and a lot of patience to make the threads useable from 4+ years of disuse. Someone recommended using a tap-kit to "freshen up" the threads. I would have gotten the proper tap if I hadn't done the install at night. Again, this is a vehicle problem, not a hitch kit problem.

Heh. We also learned that hitch covers get stolen, so we'll be ordering locking hitch receiver cover next time.


Heh. We also learned that hitch covers get stolen, so we'll be ordering locking hitch receiver cover next time. " />

by:
2007 HondaPilot

Perfect fit, easy installation, great price, outstanding quality, excellent service! Ordered for a for a 2007 Honda Pilot on Sunday afternoon and delivered on Wednesday. Installed in about 30 mins, hitch is almost completely hidden other than the receiver. Etrailer is highly recommended and I will definitely buy from them again. Thanks for the easy and professional transaction.



by:
2006 Acura MDX

Followed the instructions on the video(s). Installed hitch and wiring harness. hooked up tow bar and flat towed a car 2000+ miles.



by:
2006 HondaPilot

Very high quality product, arrived in excellent condition. Very easy
to install with the video online was helpful, I didn't lower the muffler
as the instruction said. From the time to open the box and completed the installation is 33 mins, I did used the jack to support the center of the trailer hitch to make installation much easy for myself. Now it's look fantastic love black gloss and it's made in "USA", Etrailer, you guys "ROCK"....



by:
2004 HondaPilot

I ordered the Draw-Titer Max-Frame Trailer Hitch Receiver and the T-One Vehicle Wiring
Harness for my 2004 Honda Pilot. They came earlier than I expected and took me 20 minutes to install them by myself.



by:
2007 HondaPilot

Bought wire harness and hitch. Installation of both took under and hour. The videos made it simple and was easy to follow. Did it myself. Saved hundereds over shop fees.



by:
2007 HondaPilot

I used many times works great for my use I carry 4 bicycles to the trails had lots of fun , also attach a trailer platform to move stuff , no complains thank you George very respectfully , Octavio



by:
2003 HondaPilot

This DrawTite trailer hitch was fairly easy to install. Great value & fast shipping from eTrailer.com!



by:
2006 HondaPilot

Trailer hitch fit like a glove on my 2006 Pilot. Easy installation, no drilling, and is heavy duty. Looks and works well for me. I would recommend your products to anyone. Pulls my Little Red Wagon with ease !!



by:
2008HondaPilot

I am very satisfied with my purchase. The instruction videos made installation quick and easy. The fasteners provided exceeded OEM standards. Best of all, it looks great and makes the vehicle much more useful (don't have to borrow a friend's truck to tow).



by:
2005 HondaPilot

Product was easy to install took about 15 minutes.
They need to work on the shipping box, mine arrived with the hitch hanging out of the box



by:

Sierra. all is good. forgive me for not completing your form but on the middle of a move and packing away! you were terriffic ... A+!

service was fast and without a hitch! pun intended!

Excellent service, Helpful videos and am very happy.

Pictures attached.



by:

Easy install. Impact driver only way to remove factory tow hook. I tapped out the holes in the frame rather than using the recommended brush. The entire unit is hidden behind my rear bumper. Beautiful final product.



by:
2008HondaPilot

This was one of the easiest purchases and installs that I have done. From the ordering to the installation was the quickest and smoothest transaction. The product was as described and installation was less than 30 minutes. Great product and company...



by:
HondaPilot

The service from etrailer in ordering my hitch was excellent. Had a few questions and they answered every one clearly. It was delivered earlier than expected.

Some folks wrote about problems with the install. I found it extremely easy on my Honda Pilot. I used the box it came in to support the other end while bolting up the first.

Even the wiring harness that folks had fits with was quick and to the point. The unit is solid and easy to use. I gave it only a 4 because I'm sure there must be better, stronger hitches on the market, but for the money, the etrailer hitch was a great buy. I've ordered from them again since and would recommend them to my friends and enemies.

Thanks etrailer for a great product and great service.

Joe B.

11/15/2017

Everything is still working as expected.Thank you for being there.



by:
HondaPilot

I am very happy with the 75599 trailer hitch. I installed it on my Honda Pilot. It went on very easy, It took less then an hour. Only had to remove one hanger for the muffler. Only problem I encounter was over tightening and snapping were you screw into the frame. Make sure to follow and use the torque measurements. Would definitely recommend it for any one looking to add item. I was able to purchase and pull a boat home the same day.. Very happy. I also purchased the quick connect trailer lights kit. That couldn't have gone any easier also. You tube videos helped along the way.

Ken P.

2/20/2018

All of the items I ordered and placed on my wifes car have been working great. I am very pleased with the quality and service they have provided me.



by:
2003 Acura MDX

This is the second hitch I have purchased from e trailer. The hitch arrived on time and the installation directions were straight forward and thorough. The hitch was easy to install and is an excellent hitch. Although I did not have anyone available to help me, I was able to install the hitch in about 30 minutes (I am 72). The previous hitch was for my Toyota pickup and was also easy to install and an excellent hitch.
I have also purchased two wiring harness and they are easy to install and an excellent product.
Thank you for your great products, videos and service

Steve H.

1/30/2015

Could not be happier with the products, the perfect fit, the fast deliver and the ease of installation I installed them myself as well as one for my Tacoma truck that I bought about 2 years ago However, I do recommend a second person to help as you state in your directions



by:

Great and solid! Delivery was SO FAST TOO.
Dude
at etrailer wrapped it up on a Sunday night!?!? I got a shipped email like 3 hrs after purchase! Bam! Very pleased to get it 2 days later especially with free shipping. Kudos to etrailer!

A side note: the bolt holes on honda pilot on the passenger side were open from the factory, the driver side has a tow hook with bolts in it. The driver side was fairly easy to attach however the swelling of holes on the passenger side i had to gently TAP for threads to go. Just FYI may be a slight pain depending on year or condition of the frame on your vehicle.

That being said over all i am very pleased with the seller and the installation and build of this hitch. Hope this is helpful.

Neil H.

6/29/2020

Been great! No troubles. Happy customer.



by:
2010 HondaPilot

Installed on a 2003 Honda Pilot. The hitch was delivered in 3 days from the purchase date. It was received in perfect condition. This is the third hitch I have installed on different vehicles over the past couple years and it was by far the easiest installation yet. It took me longer to clean out the bolt holes than it did to install the hitch itself. I removed the tow hook from the left side so the bolt holes were in good condition. It took me about an hour to clean out the 3 bolt holes on the right side. Tip - I sprayed the holes with liquid wrench and used a 20 gauge shotgun cleaning brush in a cordless drill to clean out the holes. I wire brushed the bolts I removed from the left side tow hook and used them to run in a little bit and then removed. Cleaned the bolts and the hole again with liquid wrench and wire brush. Repeated process several times until I could get the bolts to go all the way in using a ratchet. Once the bolt holes were clean, it took about 10 minutes to complete installation. Note I did not have to drop the exhaust, it easily slid by the muffler. This is a great hitch! I would highly recommend both the hitch and purchasing it from etrailer.

Bret B.

5/26/2015

Yes I am still completely satisfied with both the hitch and wiring harness.


25
468
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Brake Controller and Wiring Harness for a 2008 Honda Pilot
    I would be happy to help you set up your 2008 Honda Pilot with the ability to control your trailer's brakes. To start out with you will need a 4-way connector. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118336 you were looking at is the best option. This T-One connector plugs directly into your Pilot's existing wiring with no cutting, splicing or tapping required. Once you have this adapter you will be able to add the Universal Installation Kit for...
    view full answer...
  • Comparing Draw-Tite and Curt Trailer Hitches for a 2003 Acura MDX
    The Curt and Draw-Tite trailer hitches for the 2003 Acura MDX will each perform well for you. I can tell you that the Draw-Tite hitches do undergo a certain amount of extra voluntary testing that other brands do not do with their hitches. The extra 2 bolts and center mounting point on the Curt hitch do not give it additional capacity. The Curt hitch # 13328 and the Draw-Tite hitch, # 75599, are each rated at 350 pounds tongue weight and 3,500 pounds gross trailer weight. Both can be used...
    view full answer...
  • Towing Capacity of 2005 Honda Pilot and Parts Needed to Tow Trailer
    I took a look at the online owner's manual for your 2005 Honda Pilot. It states that this vehicle, if equipped with a transmission cooler and power steering fluid cooler, has a maximum towing capacity of 3,500 pounds for a standard trailer. This limit is assuming that there are just two occupants in the vehicle (including the driver). For each additional occupant, the capacity actually goes down (4 occupants = 3,300 pound capacity, etc). I do recommend verifying this information in your...
    view full answer...
  • How to Pick Out a Weight Distribution System for a 2006 Honda Pilot EX-L AWD
    Weight distribution systems apply a different angle of torque on the hitch and vehicle they are installed on than not using one. A lot of the time the problem isn't that the hitch can't handle the WD system it's that the vehicle's attachment points can't handle the added stress. The spring bars of a system take and apply the tongue weight of the trailer and transfer it through the hitch and vehicle back up to the front axle. You can imagine that puts a different kind of strain on a vehicle/hitch...
    view full answer...
  • Best Trailer Hitch Option for 2008 Honda Pilot That Doesnt Involve Trimming Bumper Fascia
    When we installed the Curt # 13328 on a 2008 Honda Pilot, we didn't need to trim the bumper fascia, as shown in the video I've linked you to. If your bumper fascia is the same as shown in the video, you shouldn't need to trim anything. The Draw-Tite # 75599 has the same towing and tongue weight capacities, so it's just as strong and would work just as well as the Curt model. The Draw Tite model makes no mention whatsoever of the need for trimming the bumper fascia, which is why it would...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2003 Acura MDX
    Out of the trailer hitches for your 2003 Acura MDX (# 13328, # 75599) I would not say that one of them is better than the other. The Curt hitch # 13328 is a great value and the one that I would choose if it were me. I have included a link to a video showing an example installation for you. Its on a Pilot which is the Honda equivalent to the MDX. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
    view full answer...
  • If a Vehicle Requires Weight Distribution To Tow a Certain Weight Is the System Required for Towing
    If your trailer weighs enough that your tow vehicle requires the use of a weight distribution system when towing then yes, you would have to connect the system and disconnect it every time you decide to tow. Installing a weight distribution system initially is a bit more involved that just hitching up the trailer. But once it is set up properly the only additional steps would be that you need to connect the spring bars. Which this does add time to the process, but it's really not that...
    view full answer...
  • Trailer Hitch Recommendation for a 2006 Honda Pilot for Use with a Trailer Hitch Mount Bike Rack
    The exhaust may or may not have to be lowered for the Curt hitch, # 13328, or the Draw-Tite hitch, # 75599, to install on a 2006 Honda Pilot. I have linked the instructions for both hitches for you to view along with some video links showing typical installations showing how we have installed them without lowering the exhaust. It is possible to install either hitch without lowering the exhaust although as you said it is mentioned in the instructions and it will make installation easier. The...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2004 Honda Pilot
    To add a bike rack on a 2004 Honda Pilot you will need to install a trailer hitch and use a hitch mount bike rack. The most popular trailer hitch for the 2004 Pilot is # 75599. I have included links to the instructions and a video showing a typical installation for you. For an entry level trailer hitch mount rack you can use the Swagman Titan 2 Bike Rack for 1-1/4" and 2" Hitches Item # S63400. This rack can tilt down and includes a built-in cable lock. It does have a threaded hitch bolt...
    view full answer...
  • What Parts are Needed to Tow a Trailer with a 2005 Honda Pilot
    We certainly do have everything you need to get your 2005 Honda Pilot ready to tow a trailer. To start with I recommend the Draw-Tite trailer hitch receiver, part # 75599. It's a custom fit on your Pilot and I've attached an install video for you. You also need a ball mount, hitch pin, and hitch ball. We have a kit that includes several options of them all, part # 989900. First you need to determine the drop or rise you need with your trailer. I've linked an article to help with this...
    view full answer...
  • Trunk Mounted Bike Racks for a 2008 Honda Pilot and a 2005 Subaru Legacy Sedan
    The Thule Bike Racks, # TH78VR and # TH911XT, and Yakima Bike Racks, # Y02630 and #Y02614, will fit on your 2005 Subaru Legacy Sedan, however they will not fit on your 2008 Honda Pilot. The trunk mounted bike racks require straps to be secured to the top and bottom of the trunks of the vehicle. There is not a secure place to mount the straps on the rear of your Honda Pilot that will support the weight of the bike rack and bikes. It is recommended to use hitch mounted bike racks for your...
    view full answer...
  • Thule Passage 2 Bike Carrier Trunk Mounted Bike Rack # TH910 Compatability for Honda Pilot 2004
    The Thule Passage 2 Bike Carrier Trunk Mounted Bike Rack # TH910XT or TH961XT will not fit on your 2004 Honda Pilot because the top straps should not be mounted directly to glass or plastic trim covering glass. This is a problem you will encounter with all current trunk mount carriers and your vehicle. I recommend a trailer hitch and bike rack for a trailer hitch system to fit your carrier needs. The Draw-Tite Class III Max-Frame Trailer Hitch Receiver # 75599 is designed to fit your...
    view full answer...
  • 3-Bike Rack Recommendations for Mountain Bikes Carried on 2001 Acura MDX
    We do offer 3-bike trunk-mount racks that will fit on your 2001 Acura MDX and these can be seen by clicking on the link provided. The best of the bunch is the Thule OutWay 3, part # TH56BV, which includes locks for the rack itself and for your 3 bikes, and which mounts using 4 vinyl-coated steel cables (instead of a half-dozen straps). A lower cost option is the Thule Gateway XT # TH78VR which is a more basic rack that does not include locks. The trouble with trunk-mount racks is that...
    view full answer...
  • How To Carry A 300Lb. Scooter And 2 Bikes On A 2004 Honda Pilot
    While using a hitch or trunk mounted bike rack, the heaviest bike will need to be on the first slot of the carrier closest to the rear bumper. No, tongue weight is used for any object or accessory attached to a trailer hitch receiver and unfortunately, there is no way to increase the tongue weight capacity of a hitch for hitch mounted accessories. There are also no fail safe or safety feature built into either the vehicle or hitch receiver when exceeding the recommended tongue weight...
    view full answer...
  • What Vehicles Does the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 Fit
    I was able to find that you purchased the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 for your 2004 Acura MDX. That hitch receiver will fit the following; 2001 - 2006 Acura MDX and 2003 - 2008 Honda Pilot. Keep in mind that trailer hitch receiver hardware is meant to only be torqued down to specs once. If you need replacement hardware you will just use part # RHK, select the manufacturer, and then insert your part number in the blank.
    view full answer...
  • Which Draw-Tite Hitch For a 2007 Honda Pilot
    The correct Draw-Tite hitch for your 2007 Honda Pilot is the # 75599, which will give you a 2" receiver to allow for towing a small trailer or carry a variety of hitch mounted accessories. If you're going to be towing then you'll also need a wiring harness, ball mount, hitch ball, hitch pin and clip. For wiring I recommend using the Tekonsha # 118336 because of the reliability of Tekonsha wiring harnesses. This will simply plug into the tow package wiring plug on the rear of your vehicle,...
    view full answer...
  • Bike Rack Recommendations for a 2005 Honda Pilot Without a Trailer Hitch
    There are three different ways to carry bikes on a vehicle and those are with a trailer hitch mounted bike rack, a rooftop mounted bike rack or a trunk mounted bike rack. Only hitch mounted and rooftop mounted bike racks are recommended for your 2005 Honda Pilot since bike rack manufacturers have determined it is not safe to attach a trunk mounted bike rack on your rear hatch. If you have a roof rack on your vehicle, then you could look into rooftop mounted bike racks like the Swagman...
    view full answer...
  • Hitch, Wiring and Brake Controller for 2006 Honda Pilot Without Factory Tow Package
    We can help you get your 2006 Honda Pilot set for towing, with a hitch, wiring and trailer brake controller. For a brake controller I recommend the Prodigy P2 # 90885 that you referenced. This unit sets the benchmark for reliability and ease of operation, including some features that make set-up and ongoing use a lot easier. You will wire this in the Pilot using our brake controller install kit # ETBC7, which includes all the wire, 7-way socket and other components needed to install the...
    view full answer...
  • How Do Hitch Extenders Affect Tongue Weight Ratings
    We don't carry the bike rack you referenced, but if the extender installs onto the rack as a solid piece then no, your tongue weight rating would not be affected. If its just a tube that slides into your hitch and then the rack installs into that loosely you would lose 50 percent of your tongue weigh rating. For more information on hitch extenders check out the FAQ article I attached on them.
    view full answer...
  • Trailer Hitch Recommendation For 2007 Honda Pilot
    The hitch I recommend for your 2007 Honda Pilot is the Draw-Tite Trailer Hitch, part # 75599. This is a Class lll hitch and has a 2 inch receiver opening. The installation requires no drilling so if someone is handy with tools they should have no problem installing the hitch. You do need to make sure whoever installs the hitch uses a torque wrench to make sure it is properly installed. I have included a link to an installation video for this hitch on a 2008 Pilot. Although a different...
    view full answer...
  • Will Draw Tite Hitch 75599 Fit a 2008 Honda Pilot and Tow 2,000 lb Trailer
    Yes, the Draw Tite Hitch part # 75599 is the correct hitch for your 2008 Honda Pilot. It has a 3,500 lb total trailer capacity which would be more than enough for your 2,000 lb trailer. You would need to check the owners manual of your vehicle to verify that your vehicle also has the needed towing capacity. I attached an install video for you to check out as well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts;...
    view full answer...
  • Above Ground Height of Curt Class III 13328 Trailer Receiver Hitch on 2004 Acura MDX
    I don't have that exact measurement handy, but I was able to figure it out for you. The drop measurement (distance from the underside of the frame member to the top of the receiver tube) is right at 3 inches. This measurement on the Draw-Tite # 75599 is just a little bit less at 2-1/2 inches. This means that the inside top of the Curt # 13328 would sit at about 16-1/2 inches above the ground, versus 17 inches for the Draw-Tite. I've linked you to the install instructions for each hitch.
    view full answer...
    Image 1 for
  • Draw-Tite Max-Frame Trailer Hitch # 75599 Width
    I went out and measured a Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 and found that the distance from bolt hole center to bolt hole center from one side of the hitch to the other is 56 inches. I attached installation instructions and a installation video for this product as well.
    view full answer...
    Image 1 for
  • Replacement Hitch Installation Hardware Kit for Hidden Hitch Class III Hitch 75599
    We can help you with replacement hitch installation hardware for your Class III Draw-Tite # 75599. All you need to do is enter the part # RHK into our search box. Then simply enter the hitch part # 75599 in the box and choose Draw-Tite from the manufacturer drop-down menu. We'll then put together all the correct fasteners for your hitch. You'll need a torque wrench to ensure all fasteners are secured to the manufacturer's specs; this information is included in the linked instructions....
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.