Comparing Draw-Tite and Curt Trailer Hitches for a 2003 Acura MDX
Question:
Looking for a class III hitch for 2003 ACURA MDX. The Curt hitch has a center mounting point 8 bolts vs 6 bolts while the other hitches do not. Does this make Curt a better hitch?
asked by: Rodney L
Expert Reply:
The Curt and Draw-Tite trailer hitches for the 2003 Acura MDX will each perform well for you. I can tell you that the Draw-Tite hitches do undergo a certain amount of extra voluntary testing that other brands do not do with their hitches. The extra 2 bolts and center mounting point on the Curt hitch do not give it additional capacity.
The Curt hitch # 13328 and the Draw-Tite hitch, # 75599, are each rated at 350 pounds tongue weight and 3,500 pounds gross trailer weight. Both can be used with weight distribution which pushes the capacities of the hitches to 500/5,000 pounds. I think you will be pleased with either hitch.
If you are planning on doing some towing, I recommend the etrailer ball mount kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring use # 118336. I have included some links to isntallation instructions and videos for the hitches and wiring.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Towing Capacity of 2005 Honda Pilot and Parts Needed to Tow Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Parts Needed to Tow a Trailer with a 2007 Honda Pilot
- Q&A: Trailer Hitch Recommendation for 2003 Honda Pilot
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch for a 2006 Honda Pilot w/ Full Size Spare
- Q&A: Hardware for Curt Class III Trailer Hitch Receiver # 13328 to fit a 2005 Honda Pilot
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Does a Short Bed Truck Need a Slider if the Trailer has Max Turn Technology
- Q&A: New Trailer Hitch Is Touching Exhaust On 2005 Acura MDX
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks