Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(82 reviews)
Price: $256.79
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75601
Retail:$435.99
Our Price: $256.79
You Save: $179.20
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (82)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75601
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 500 lbs TW
- 7500 lbs WD GTW
- 750 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 7,500 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 750 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75601 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87456 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2009 Dodge Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper
- 2007 - 2009 Dodge Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper
- 2007 - 2009 Dodge Sprinter 3500 Van - 144 inch Wheelbase - with factory step bumper
- 2007 - 2009 Dodge Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 3500 Van - 144 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 3500 Van - 144 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 2500 144 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 2500 170 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 2500 144 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 2500 170 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 3500 144 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 3500 170 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 3500 144 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 3500 170 inch Wheelbase - with factory step bumper
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75601
Average Customer Rating: 4.7 out of 5 stars (82 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Kent 01/09/2024
This has worked out well and was easy to install. Been a year plus and have towed a lot with it and also carried motorcycles on racks. Thank you for a great product that holds up to actually being used. Kent
by: Peter in Nevada09/05/2023
Great hitch at a great price with easy install. This trailer hitch was a snap to put in right out of the box. You'll need to lift-support both sides of it as you line up and install the first (either) side--my wife held one side as I installed the other.
by: Lawrence08/21/2022
It is solidly built and fit our Sprinter exactly as advertised. A simple installation as well. Good stuff!
by: Christopher 11/26/2023
Mercedes-Benz Sprinter
Fit the 2021 Sprinter with the no drill mount perfectly. Good not have asked for more.
by: Thadeus03/27/2019
2019 Ram 2500
This was actually used on a new 2019 Sprinter which is a different body style but the inner frame work is still the same as the 2007-2018 2500 versions with factory rear step. Fits fine, a bit snug on the frame rails due to the undercoating used on the van but it works. I would coat the hardware in either paint or some grease to help with corrosion after installation as it uses the yellow zinc and bright zinc coated hardware which does not handle corrosive environments well. Packaging of the hitch could have been a bit better, there was some paint touch up needed where the plastic wrapped around the bar for shipping wore off but everything was there when unwrapping it.
It is a good option to retain the factory step though I believe Mercedes is releasing a hitch bar that would work with the factory bumper step.
by: Luther 09/12/2023
Mercedes-Benz Sprinter
Pretty simple to install, took about an hour to setup. Pulled a 1966 Chevy C10 with my Sprinter. The quality is very good and of course shipping was fast.
by: Duong Nguyen01/15/2021
2020 Mercedes-Benz Sprinter 2500
Installed on a 2020 Sprinter Cargo with factory rear step. I used two wooden stools to help me position and hold the hitch in place while I tightened up the nuts and bolts. Best part, if you have a 1-Up USA bike holder, it will not obstruct the backup sensors and will not block your license plate.
by: Douglas 10/23/2023
Mercedes-Benz Sprinter
The receiver mounted very easily to my sprinter took about 20 minutes. I would highly recommend this unit.
by: Jef12/03/2020
Great hitch. Fairly easy install even with the Sprinter factory step. Make sure you have a decent riser setup to position the hitch for installation (my old tire/wood block riser setup wasn’t pretty but worked for my solo install).
by: Jeff 05/09/2024
2024 Mercedes-Benz Sprinter 2500
Very easy to install.
by: Cristian 04/02/2024
Perfect fit, easy install
by: Luis 02/01/2024
Easy install. No modifications needed. I strongly recommend it.
by: Eric07/14/2021
2020 Mercedes-Benz Sprinter 2500
Fit great. 30 minutes - 1 hour install depending on ability. I was able to get one side hung and used a bar to pop the other side past the frame into place. Two people would make it a bit easier. Need 18 and 19mm sockets and wrenches.
by: Bobby 02/02/2024
2019 Mercedes-Benz Sprinter 2500
Super fast delivery and excellent customer service!
by: Elizabeth05/04/2022
Looks great! Installed in about 30min on my 2014 2500 sprinter passenger van.
by: Chris Y01/08/2023
2019 Mercedes-Benz Sprinter 2500
Fits 2020 Sprinter Passenger. Fairly easy install if you have power tools and drop spare tires. Tight fit around exhaust tip but fits.
Problem was packaging from etrailer. The hitch was delivered in plastic wraps without any protection in corners. I understand hitch is usually not visible from outside however Sprinter van hitch sticks out so Ill have to touch up all the banged up corners. They could’ve simply add cardboard just around the corners.
by: Jennifer03/01/2022
2021 Mercedes-Benz Sprinter 2500
Fits perfectly, installation was simple. Great price.
by: Craig11/02/2019
Mercedes-Benz Sprinter
Solid build as I would expect from DrawTite. Installation was easy. Needed to buy additional bolts ($95) because Sprinter Factory bolts were removed by previous owner.
by: Josh01/14/2022
Good solid unit, easy install. The one thing I’m disappointed by is the finish of the product. The paint or powder coat could be better, because of this likely would not buy again.The hardware sent with it rusted as well as some rust on the hitch itself that I’ve had to touch up. Metal must not have been prepped properly. And where we live it’s rains, didn’t snow much and they don’t salt the roads
Jenny N.
1/17/2022
Over time the hitch will be hit with road debris that will lead to rust in rainy conditions. I recommend touching up the hitch with a rust resistant paint which you will have on hand for regular hitch maintenance.
Helpful Links
by: Mel 01/30/2023
Everything lined up and the advice from the website video with product comparisons was very helpful.
by: Scott 08/16/2023
Exactly what I ordered and arrived in t ime
by: Dimitri Mundarain07/21/2016
2015 Mercedes-Benz Sprinter
I think the packaging could have been better. the piece came wrapped on plastic, but it is so heavy that the hitch ends rubbing out of it. the instructions are ok, but the video is awesome. once you watch that video, you know exactly what you have in front of you. The kit came with almost everything I needed with the exception of a few wire ties and a connector (disclosed on the video).
The item looks great, they emailed me tracking info and it even showed up before they promised. I would buy form etrailer again in no time!
Regards,
Dimitri
by: Reid 08/17/2021
Ford Edge
Easy Peasy. FAST SHIPPING!!! It arrived 5 days earlier than expected. I had it installed in under 30 minutes. I didn't time it but it felt like it. I installed it by myself. I took the three bolts that were already installed for my factory step and turned them around one at a time. You can't push them all the way thru, only to the edge of the frame so the hitch will slide up. I ran the new bolt that was supplied all the way thru on one side then I had to convince the other side to go up due to the undercoating. I pushed the second bolt thru on the second side and it was uphill after that. The three original bolts were tight so I had to use a socket wrench to get them to go thru the holes. I do have two complaints. The bumper was shipped wrapped in plastic only. The paint was scrapped off the hard edges towards the back. Nothing that a can of spray paint can't fix. The other issue was one of the nuts supplied was a M10x1.5 instead of the M12x1.5 needed. A trip to Lowes and $1.00 later and it was fixed. We are moving this weekend so I will be using the new hitch real soon. Thanks E-Trailer.
by: Dave S12/04/2019
2018 Mercedes-Benz Sprinter
Great hitch for our use (bike rack on the back of our Sprinter van). Can't speak to towing. Went in with no problems. The van conversion shop near us wanted $500 + labor to install basically the same hitch. This was a no brainer.
by: Keith 07/09/2022
Mercedes-Benz Sprinter
Very good price. Quick delivery. Easy install. Customer service was knowledgeable when I called and helped me figure out the exact receiver hitch for my Sprinter van
25
82
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Does The Exhaust Have To Be Modified On The 2016 Mercedes-Benz Sprinter To Install A Draw-Tite HitchAdding the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75601 to your 2016 Mercedes-Benz Sprinter 2500 does not require the exhaust to be modified. The hitch mounts to the frame using the same hardware as your bumper. You want to make sure you follow the instructions for moving the hardware before installing the hitch.
view full answer... - Recommended Trailer Hitch Receiver For A 2015 Mercedes-Benz SprinterI have the perfect trailer hitch receiver that is a confirmed fit for your 2015 Mercedes-Benz Sprinter. For this, I recommend using the Draw-Tite Class III Max Frame Receiver Hitch part # 75549 for cab and chassis models and part # 75601 for both the 2500 and 3500 models. I have attached an installation video of this hitch on a 2016 Mercedes-Benz Sprinter Van for you. The Draw-Tite Class III Max Frame Receiver for cab and chassis models has a maximum weight capacity of 600 lbs. tongue...
view full answer... - Do Hitches for 2021 Mercedes Benz 2500 Sit Lower if Step Bumper is PresentThe hitches that fit the 2021 Mercedes Benz Sprinter 2500 with the step bumpers like part # 75601 do sit lower than the vehicles that do not have the step bumper like part # 75549. If you check out the two picture I attached you can see that the hitches fit right up to the bottom of the rear bumper and if the step is there the hitch sits the width of the step down from that point.
view full answer...
- Trailer Hitch for 2019 Mercedes-Benz Sprinter 2500 Passenger Van With Factory Step BumperThere is one trailer hitch that you can potentially use on your 2019 Mercedes-Benz Sprinter 2500 passenger van with the factory step bumper, which is the Draw-Tite Trailer Hitch # 75601. The only potential caveat is that this hitch will not fit if your Sprinter has a 30-3/8" frame (measured from outside to outside of frame), so you are going to need to measure to ensure your frame does not have that measurement. If so, this hitch will absolutely work for your '19 Sprinter 2500 passenger...
view full answer... - Draw Tite Hitch Fit Recommendation for 2016 Mercedes Sprinter 3500 with 144 inch WheelbaseI believe you meant to type 366.5 cm wheelbase as that would equal 144 inches which the Draw Tite hitch part # 75549 would be a fit for your 2016 Mercedes Sprinter if you didn't have the factory step bumper. If you did have the factory step bumper you would want the part # 75601.
view full answer... - Correct Hitch for 2020 Mercedes-Benz Sprinter 2500 170" Wheelbase Passenger Van with Step BumperThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 75601 is the only available trailer hitch options for a 2020 Mercedes-Benz Sprinter 2500 170" Wheelbase Passenger Van with Step Bumper. That said, you'll need to be sure you don't have a 30-3/8" wide frame which is measured from each outside edge. The Draw-Tite hitch has a class III rating with 2" receiver tube opening. It will work great for towing or hitch mounted accessories such as bike racks and cargo carriers.
view full answer... - Does Trailer Hitch for 2020 Mercedes Sprinter 2500 Attach to Outsides of Vehicle FrameYes the Draw Tite hitch part # 75601 does attach to the outsides of the frame rails of your 2020 Mercedes Benz Sprinter 2500. You can see this in the install instructions diagram that I attached to this page.
view full answer...
- Which Trailer Hitches Fit 2021 Mercedes Sprinter 170 in Wheelbase and Factory StepFor your 2021 Mercedes Benz Sprinter 3500 that has a 170 inch wheelbase and factory rear step the correct fitting hitches are the Curt # 13358 and the Draw Tite # 75601. These hitches are virtually identical in capacity and design with only notable difference being that the Curt is made in the USA.
view full answer... - Trailer Hitch for 2019 Mercedes Benz Sprinter 2500 with Best Ground ClearanceIf your 2019 Mercedes-Benz Sprinter 2500 has a standard bumper without the step, the Draw-Tite # 75549 is going to provide you with the most ground clearance at 15" from the bottom of the receiver tube to the ground. If your Sprinter has the factory step bumper, you can use the Draw-Tite # 75601, which has roughly 14-3/4" from the bottom of the receiver to the ground. None of the hitches for the 2019 MB Sprinter 2500 will fit on Sprinter vans with a 30-3/8" frame width measured outside...
view full answer...
- Best Hitch for 2014 Mercedes-Benz Sprinter 2500 Passenger Van With Step BumperThe best hitch for your 2014 Mercedes-Benz Sprinter 2500 passenger van with the step bumper is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601. This is the best hitch because it is the only hitch confirmed to fit your application. However, you will need to measure your frame. If it measures 30-3/8" outside to outside of frame you will not be able to use the hitch. If this is the measurement you get, the only choice would be to use a universal weld-on hitch like the # 41990-07 instead.
view full answer... - Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
view full answer... - Hitch for 2012 MB Sprinter 3500 with 170 Extended WheelbaseThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 fits a 2012 Mercedes-Benz Sprinter 3500 with the 170" wheelbase (and standard bumper) and as long as it does not have the 30-3/8" frame, measured outside to outside of frame. If you have the factory step bumper then you need the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 instead which has the same criteria for fitment. If you're looking to tow with the Sprinter then you need the T-One Wiring Kit # 118650 and a ball mount kit...
view full answer... - Fit of Draw-Tite Class III # 75601 Trailer Hitch on 2015 Mercedes Sprinter w/ 144 Inch WheelbaseThe Draw-Tite Class III Hitch, part # 75601 will fit a 2015 Mercedes-Benz Sprinter with the 144 inch wheelbase and factory step bumper unless the outside to outside dimension of the frame members is 30-3/8 inches (which is found on cab/chassis models and not passenger vans). You can see the installation details by clicking the link I provided for you. To complete your towing system, I'd recommend the following: Trailer wiring harness w/ 4 pole trailer connector, part # TK22115 Ball mount,...
view full answer... - Hitch that Fits 2017 Mercedes-Benz Sprinter 2500 with Step BumperThe Draw Tite hitch part # 75601 is a fit for your 2017 Mercedes Benz Sprinter with a factory step bumper. The Draw Tite and Curt hitches both have glossy paint so there isn't a way to get the matte finish you mentioned.
view full answer... - Does Draw Tite Hitch for 2019 Mercedes Sprinter Have Bracket for Trailer WiringThe Draw Tite hitch part # 75601 that you referenced does come with a bracket welded to the crosstube which is designed for trailer wiring to attach to. So what you could do is also get the 7-way/4-way part # 30955 which would plug into the round connector you have at the rear of the vehicle and then would bolt directly to this bracket and you'd be set!
view full answer...
- Does Draw Tite Hitch # 75601 Fit High Top 2007 Dodge Sprinter 2500 Cargo VanYes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 that you referenced does fit your 2007 Dodge Sprinter Van with a high top.
view full answer... - Trailer Hitch Fit for a 2016 Mercedes-Benz Sprinter 2500 Passenger Model with Step BumperThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 75601 is a fit for your 2016 Mercedes-Benz Sprinter 2500 and the only option we have for you at this time. The factory step bumper can be left installed and you will not need to make any modifications to this. I spoke with Draw-Tite to make sure it would fit the Passenger Model and they said it would no problem. In regards to clearance, we have not yet installed this yet so I don't have exact measurements from the bumper but what I...
view full answer... - Distance Between Brackets of a Draw-Tite Hitch for a 2019 Mercedes-Benz Sprinter 3500For your 2019 Mercedes-Benz Sprinter 3500, there are two Draw-Tite hitches available depending on what kind of bumper you have. For the 170" wheelbase with a factory step bumper, the hitch you referenced, part # 75601, is the one to choose. As you said, this will not fit the rare 30-3/8" wide frames as that is too narrow. The distance between the brackets of this hitch is 39-3/8". You may need to measure the frame again to see if this will fit. I've linked to a video installation of a...
view full answer... - Recommended Trailer Hitch Receiver For 2011 Mercedes-Benz Passenger Van W/ 144" Wheel BaseFor your 2011 Mercedes-Benz Springer Passenger Van with the 144" wheel base you will need the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75601 if you have the factory step bumper, or the # 75549 if you have the standard bumper. If you are needing a vehicle wiring harness as well I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118650. I included a few videos of the products mentioned for you to take a look at.
view full answer... - Will Draw-Tite Trailer Hitch # 75549 Fit 2019 Mercedes Sprinter 2500 with 144" Wheelbase As long as your 2019 Mercedes Sprinter 2500 features the standard factory bumper the Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 that you referenced will fit perfectly. It will line up to existing holes in the Sprinter's frame rails for a no-drill installation and its robust construction allows for a 6,000 pound towing weight capacity and a 600 pound tongue weight limit. If your Sprinter happens to have the factory step bumper instead then the correct Draw-Tite Trailer Hitch is...
view full answer... - Draw-Tite Trailer Hitch Fits for a 2015 Mercedes-Benz Sprinter 2500 VanThe Draw-Tite Trailer Hitch # 75601 will fit your 2015 Mercedes-Benz Sprinter 2500 Van as long as it has the factory step bumper and it doesn't have the 30-3/8" frame (measured outside to outside). If you don't have the factory step bumper then the correct Draw-Tite Trailer Hitch is part # 75549 which has the same stipulation for the 30-3/8" frame. I've attached a sample installation video of the 75549 that you can check out. If you let me know what you plan on using the trailer hitch...
view full answer... - 2017 Mercedes Sprinter 2500 144WB w/ Factory Step Bumper Hitch For Ground ClearanceThe Draw Tite # 75601 and the Curt # 13358 that you referenced both are a fit for your 2017 Mercedes Benz Sprinter 2500. They have very similar ground clearance but the Curt has the slight edge as it seems to sit a bit higher. I attached a picture that shows the difference. The Curt is in the top picture.
view full answer...
- Trailer Hitch and Wiring Recommendation for 2016 Mercedes SprinterFor a hitch confirmed as a fit for your 2016 Mercedes Sprinter 2500 144 inch wheelbase with a factory step bumper you would want the Draw Tite hitch part # 75601 which has been confirmed as a fit. For trailer wiring you then would want the part # C56496. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8...
view full answer... - Towing Setup for a 2020 Mercedes-Benz Sprinter 2500 w/ Factory Step Bumper and a 144WBYes, we do sell a hitch that is compatible with the factory step bumper on your 2020 Mercedes-Benz Sprinter 2500. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75601. This hitch is custom fit and designed to fit the 144WB of your Sprinter van. I have attached an installation video. This hitch also comes with a bracket to mount a 7-way vehicle connector. I recommend the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector item...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Matthew E
Updated by:
Isabelle B
Video by:
Dustin K
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lawrence
8/25/2023
Perfectly!