bing tracking image
  1. Trailer Hitch
  2. Chevrolet
  3. Equinox
  4. 2007
  5. Draw-Tite
FITS 2007 Chevrolet Equinox
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36408
Our Price: $160.99
Trailer Hitch
Confirmed to Fit
2007 Chevrolet Equinox

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Chevrolet trailer hitch experts, and offer a great price. etrailer.com carries a complete line of Draw-Tite products for your Chevrolet Equinox 2007. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part 36408 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (257)
  • Q & A (0)
  • Photos

2007 Chevrolet Equinox - Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

  • 1-1/4 Inch Hitch
  • Class II
  • 3500
  • Concealed Cross Tube
  • Draw-Tite
  • 300
  • Custom Fit Hitch

This fully welded, corrosion-resistant Chevrolet Equinox trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36408 Draw-Tite Class 2 Trailer Hitch Receiver

90145 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36408 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
300 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36408

Average Customer Rating:  4.8 out of 5 stars   (257 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2017 ChevroletEquinox

I bought this hitch in order to use a hitch-mount bike rack. It was pretty easy to install. I used some ramps to get more ground clearance for installation and had help from a friend. it is a clean looking unit, nothing ugly sticking out. The installation video was very helpful to watch before we did it.

Alan L.

2/14/2018

Works great! Still solidly mounted and gets plenty of use.



by:
2012 ChevroletEquinox

Hitch installed very easy and was of excellent quality. Only issue was that the bolts were the wrong size for the factory installed nuts. Hint to anybody installing:Put a penetrating oil in the factory nuts, then clean them with a wire brush (gun cleaning brush or plumbing brush), then run the bolts in and out prior to holding the hitch in place. I saw some comments that the spring bolt wires were too short, but they are just fine. This issue must have been corrected by the manufacturer.



by:
2017 ChevroletEquinox

This hitch is perfect for my Kuat bike rack. The finish is very high quality, installation was easy, and it looks great on the vehicle. It tucks up in the body perfect.

Doug B.

7/10/2020

This hitch has been excellent, and my Kuat rack too, hard to beat this combo!



by:

Great service. Fits awesome. Multiple purchases there



by:

Had to purchase 4 bolts to mount sides of hitch into welded nuts in the frame of the car



by:
2013 GMC Terrain

Everything fit great and working. Thanks for the fast service.



by:
2011 ChevroletEquinox

Very pleased with the Drawtite hitch and alternate wiring harness I ordered for our 2011 Equinox. The hitch install took less than fifty minutes and I was pleased that everything lined up and bolted together with no difficulties. The wiring harness installed in less than 10 minutes. Reviewing the Video's on your web site were a huge help when it came to the wire harness. By ordering everything from your company saved us 400.00 from a dealer install.



by:

Excellent! I could not be more pleased. The hitch arrived quickly and was well-packed. Installation was a breeze. The installation video was spot-on accurate and helpful. All the parts and instructions needed were present. The wires for threading the bolt and metal part into the bumper were exactly the right length -simple, fast and easy to do.

The receiver hitch itself appears to be very well made.

Even though the vehicle looks fine with the little hitch trim door removed, the instructions included details on how to cut the little hitch trim door to fit around the hitch. I did it and put the little trim door back on - wow! It looks great - an unexpected bonus.

Thank you to the folks at etrailer. I am a very pleased customer!



by:
2011 GMC Terrain

installed this Hitch (#36408) on my 2011 GMC Terrain the next day (7/6/11) and all went very well except that I had to bend the passenger-side upright support about one inch outward, in order to fit in place and bolt in.
The hitch may have been dropped on that side during shipping and was sticking out from the carton, but I was able to straighten it out to fit...all is perfect!



by:
2012 ChevroletEquinox

Great Hitch. My wife and I purchased this hitch specifically for mounting a bike rack on our 2012 Chevy Equinox 2LT. I ordered it Aug 9th and received it Aug 11th via 2 day shipping. There are six easy bolts that were extremely easy to install. The hardest part was holding it up. Strongly recommend you install with a partner so there's no chance of stripping or breaking bolts from stress. Some models do not already have all the holes needed but there is extra hardware for this. Fortunately ours was equipped with all 6 holes and I installed it in about 25 minutes with my wife's assistance. It's very stable and neat. Also, ensure you do it right and torque it within. Very happy with this purchase.



by:
2011 ChevroletEquinox

Easy to install.. Works great for my thule t2 bike rack.



by:
2013 ChevroletEquinox

Installation was a Breeze, no help, completed myself. Product ultra durable, easy to install, looks great. Pleased with how everything lined up well. Pull wire to feed block and bolt through bumper frame needs to be 6" longer. Only complaint. Used a coat hanger to add length. Would recommend if you want a hitch...and don't want to get ripped off at a dealer.



by:
2013 ChevroletEquinox

On time delivery. Concern as to package condition upon receipt alleviated as all parts were accounted for and in operational condition. Installation was easier after watching videos from website. Printed instructions not very clear. All in all an excellent product at a very good price. Thank you.



by:

Hitch installed perfectly! No issues what so ever. I don't know who invented the wiring harness but they are a genius! I've never wired up a car so easily. It literally took me maybe 10 minutes start to finish.



by:

EASY INSTALLATION AND DRAW COVER LOOKS GREAT.



by:
2015 ChevroletEquinox

Needed an M12 x 1.75 tap to clean out the rusty nuts welded on the Equinox. After that, install was a breeze. Hitch looks great!



by:

unfortunatly I have been unable to put the hitch to use. Unforseen events, the hi temoertures and a few other things did not give me the opportunity to trailer my boat to go fishing. I hope this year will ndifferant & try out the hitch. That being said, the product & the installation & instructions were just great & that's a good thing. I will return with an upgrade in the future to give va response to you



by:
2016 ChevroletEquinox

Received package sooner than I expected, which was great! It had all the items required for fast easy installation, and after seeing a you tube video on this, it took about 10 minutes to complete. Everything fit perfectly. Super happy with this product!



by:

Fast delivery and easy installation...Perfect fit with all the necessary hardware. Very easy to do business with....Thank you...H.



by:
2017 GMC Terrain

We needed a hitch for our new 2017 Terrain to haul our bike carrier and maybe a small boat. Searched and found the best price at etrailer. Great looking hitch and perfect fit. Less than an hour to install and am very pleased with my purchase.



by:
2013 GMC Terrain

I purchased the Draw-tite for my 2013 Terrain to use with a small trailer for yard work etc. I was surprised how quick the part showed up and the free shipping was great. I watched the video on installing it which helps. They indicated using a round wire brush to clean out the weldnuts and this is a must, especially if you live in the North. I spent time cleaning them and sprayed some oil in them and then ran a bolt in each nut to make sure the bolts would go in easily when I started the final ass'y. I used a floor jack to hold the hitch in place while I put in the four side bolts. I then pulled it out and installed the center bolts. I didn't tighten the bolts until I had all 6 in place. The product looks great on the SUV, it's tucked under the bumper so all you see is the receiver for the ball & drawbar.

Larry P.

2/13/2018

I was surprised to get your follow up on the Draw-Tite hitch. Im still very satisfied with the product and have recommended it to others.



by:
2015 GMC Terrain

Check the bolts, had a hell of a time finding the correct size bolts for my terrain when it said it would fit. Apart from that it's great

Etrailer Expert

Katrina D.

8/21/2023

I am sorry that you had a hard time finding the correct size bolts. This hitch should have come with a complete hardware kit and the installation instructions for your GMC Terrain. Did you not receive the correct hardware with your hitch?



by:
2017 ChevroletEquinox

I absolutely love dealing with etrailer.com. The hitch I purchased for my wife's new (to her) 2017 Chevy Equinox came a day earlier than estimated by etrailer. I had it installed the same day. The only problem I encountered was trying to thread the nuts on the center bolts in the bumper. My hands didn't seem to fit, and I had a devil of a time trying to thread them on, all the while fearing I would push the bolts back up into the bumper and lose them. I love how the hitch fits up under the vehicle, almost out of sight.
This is the third hitch I have purchased from etrailer and have yet to be disappointed. I would recommend the products they carry and their service to anyone and everyone.

Mel

5/13/2020

Unfortunately, the wife traded her Equinox back in March of 2020. So I technically cant comment on performance 1 year later. However,for the 10 months we used the hitch,it performed without a hitch. Definitely recommend e-trailer.com to anyone looking for towing products. 5 star customer service.



by:
2013 GMC Terrain

Purchased the trailer hitch for our 2013 Terrain and it went on like a charm. Instructions were very CLEAR and easy to follow. Even attaching the light wiring was far easier than I anticipated. We liked it so much that we have gotten rid of our old bike carrier and purchased a hitch mounted bike carrier from you. It also fits perfectly.

Mary T.

8/25/2017

Still doing well. performing as advertised



by:
2013 ChevroletEquinox

Extremely fast delivery and excellent communication from Etrailer folks. Directions need minor correction. We have a 2013 chevy equinox and we needed to use the pull wire tool to attach center bolts as the equinox bumper did not have threaded holes ,need to attach as if bumper was from a Saturn. Maybe when GM dumped the Saturn line, they are using some old bumpers on their Chevys and not telling anyone??? But other than that ( and threading the bolts through the bumper can be alittle tricky, i used thicker wire than provided and was alot easier to do), the hitch is farely easy to install and is quality . Joe H. Pittsburgh, PA.

Joe H.

7/22/2014

Hi Patrick, all is well, we use the hitch for a bike rack, and its working fine. Thanks for the followup.


25
263
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Will Trailer Hitch from 2017 Chevy Equinox Fit 2019 Equinox
    We have hitches for the 2019 Chevrolet Equinox but the # 36408 Draw -Tite is not a fit because there's a generation change after 2017. Instead, if you want to keep a 1-1/4 inch receiver the only option is part # 36642 If you'd rather upgrade the hitch size to the 2 inch receiver I recommend the Draw-Tite # 76419 which has a concealed crosstube so all you see is the receiver opening under the bumper. That's it in the picture I attached. Be aware neither of these hitches are confirmed to...
    view full answer...
    Image 1 for
  • Hidden Hitch Recommendations for a 2013 Chevy Equinox
    There are two Hidden Hitch brand hitches available for your 2013 Chevy Equinox, both of them are confirmed to fit your vehicle. The Hidden Hitch # 87572 (no longer available) or the Draw-Tite # 36408 would work great for your Equinox. If I were you I would go with the # 87572 since it is a Class III hitch with a 2 inch opening that will have a larger carrying capacity and have more options for hitch accessories. I attached an FAQ article on hitch classifications also for you to check out...
    view full answer...
  • Hitch and Accessories for Towing Dirt Bikes on Trailer With 2010 Chevy Equinox
    The Draw-Tite Class II Trailer Hitch, item # 36408, would work great for towing a small trailer, as long as it does not weigh more than 3500 lbs (trailer + load). However, I usually recommend that people at least consider going with a Class III hitch when they have the choice. A Class III hitch, like item # e98865, would allow for greater flexibility in the future, as you will have a better selection of accessories, such as a cargo carriers and bike racks. You'll also need a trailer wiring...
    view full answer...
  • Recommended Curt Class III Receiver and SportRack 3-Bike Rack for 2011 GMC Terrain
    Although some Class II receivers are offered for your Terrain, I always recommend going with a Class III whenever the choice is available. Although the greater capacity is not that important to you, the 2 inch receiver that the Class III uses is much more common, therefore there is a better selection of hitch mounted accessories like bike racks or cargo carriers available for the 2 inch receiver. The etrailer Class III Receiver, part # e98865 is our most popular hitch for your Terrain and...
    view full answer...
  • Ball Mount Recommendation for Draw-Tite Class III Hitch on 2013 GMC Terrain
    Given the height of your receiver and the average height of a trailer coupler, we'd typically recommend a # 36051 ball mount. This ball mount would provide either a 5/8 inch rise or a 1-1/4 inch drop. The FAQ article I have linked you to shows some simple measurements you can take to determine how much of a rise or drop you'll actually need. Simply measure from the inside top of your receiver opening to the ground, and with your trailer jacked up so that it is perfectly level, measure...
    view full answer...
  • Recommended 2-Inch Class III Hitch for 2010 GMC Terrain
    Given the age of your 2010 GMC Terrain you can safely assume that there will be rust and/or dirt trapped in the threads of the weld nuts on the frame. You can use a spray lubricant product like WD40 or PB Blaster along with a stiff bristle brush to clean them. We have a helpful article linked for you to guide you through this process. It often takes more than one application of lubricant and multiple brushings to remove all the material from the threads. It is best to apply the lubricant...
    view full answer...
  • How to Determine Hitch-Mounted Cargo Carrier Weight Capacity on 2010 Chevrolet Traverse
    The Curt Class III hitch # 13424 that fits your 2010 Chevrolet Traverse LT2 has a tongue weight (TW) capacity of 500-lbs when used with a hitch-mount cargo carrier like their # C18150. (TW is downward force on the hitch.) The vehicle weight rating that matters for this kind of application is the car's TW. This is usually about 10-percent of the gross towing capacity and should be noted in your owner's manual. I checked an online version of the 2010 Traverse manual for its TW rating but...
    view full answer...
  • Is The Draw-Tite # 36408 On A 2006 Chevy Equinox Hidden Or Fully Exposed
    The Draw-Tite Class II 1-1/4 Inch Hitch # 36408 that fits the 2006 Chevy Equinox will be mostly hidden underneath your bumper and rear fascia. The only part of the hitch that you can see on the rear is the receiver tube that is sticking out from under the rear fascia. I am sending a link to the installation instructions on the Draw-Tite and I have a video link that shows a hitch being installed on a 2009 Chevy Equinox. The hitch being installed is a different part number, but the position...
    view full answer...
  • Replacement Hitch Receiver Hardware for 2011 Chevy Equinox with Factory Weldnuts
    I looked up the hardware on the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36408 as well as the etrailer 2 inch # e98865 which are both a confirmed fit for your 2011 Chevy Equinox. The weldnuts from the factory are M12 also referred to as 12 mm so the bolts used are M12 x 1.75 x 40mm. If you want the replacement hardware for a specific hitch you can use # RHK to get everything you need.
    view full answer...
    Image 1 for
  • What Size Thread Tap Would be Needed for Hitch Install Weld Nuts of 2008 Chevy Equinox
    The bolt sizes that come with the Draw Tite hitch # 36408 which fits your 2008 Chevy Equinox is M12 for the vertical brackets that attach to the outside of the frame. It's not uncommon to need to tap out rusty weld nuts on vehicles with a few years on them. You'd just need to source an M12 tap and you'd be set.
    view full answer...
  • Adding a 7-Way and Brake Controller to a 2012 Chevy Equinox
    It means that the vehicle, when properly equipped, can tow a trailer that weighs up to 3,500 pounds. If your 2012 Chevy Equinox is a model that is rated for 3,500 pounds then you will not have a problem towing a trailer weighing up to 3.052 pounds. Usually to reach the maximum capacity you will need to have a trailer with electric brakes and use a brake controller to activate them. We do have the parts you will need for this. First you will need to install a 4-Way trailer connector, #...
    view full answer...
  • Does etrailer.com Offer Hitch Installation
    We certainly do! If you live nearby, or will be traveling near the Wentzville MO area, we'd be happy to install a hitch for you. Give our Customer Service folks a call for an appointment or for more details.
    view full answer...
  • Availability of Bike Rack To Fit on 2005 Chevrolet Equinox With Factory Spoiler
    Thule does list the Thule OutWay 2 Bike Trunk Rack, part # TH45JV, as a fit on a 2005 Chevrolet Equinox, and it clarifies that it works with all models. The directions say to place the top clips in the gap at the front edge of the top of the hatch. I would check your vehicle and determine if the top clips can attach to the top edge of your hatch without touching the spoiler. If the straps can attach without interfering with the spoiler you should be able to use the trunk bike rack and Thule...
    view full answer...
  • Will Draw Tite Hitch 36408 Fit a 2012 Chevy Equinox 4 Cylinder
    We checked with Draw Tite and the hitch part # 36408 that you referenced is a confirmed fit for your 2012 Chevy Equinox 4 cylinder so it is going to work. They would be the final authority on what the hitch fits since they are the manufacturer. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Will the Thule Passage 2 Bike Carrier # TH910 Trunk Mounted Bike Rack Work on a 2006 Chevy Equinox
    The Thule Passage 2 Bike Trunk Mounted Bike Rack, item # TH910XT, is not recommended for your 2006 Chevrolet Equinox because the top straps should not be mounted directly to glass or plastic trim covering glass. I checked with both Thule and Yakima to see if there is a rear mounted bike rack available for your Equinox and at this time there is not. The best recommendation I can make at this time is a receiver hitch and a hitch mounted bike rack. A good combination would be the Draw-Tite...
    view full answer...
  • Size of Hardware Needed to Install Trailer Hitch on 2010 Chevy Equinox
    The size bolts that come with the Draw Tite hitch part # 36408 that you referenced is M12 and 1/2-13. We offer a way to order replacement hardware for this hitch as part # RHK. You'd need to enter the part number of the hitch and select the brand from the manufacturer and we'll ship you out the correct hardware.
    view full answer...
  • Replacement Hardware for Draw-Tite Trailer Hitch on 2007 Chevy Equinox
    Each of the bolts for the Draw-Tite Trailer Hitch # 36408 that fits your 2007 Chevy Equinox are M12 hex bolts. I strongly recommend using the Replacement Hardware Kit for Trailer Hitches # RHK to get the correct hardware for this hitch. All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. So you'll simply enter "36408" in the "Hitch Item Number" box...
    view full answer...
  • Replacement Hardware for Trailer Hitch on 2013 Chevy Eqinox
    The correct hardware will depend specifically on the hitch you have for your 2013 Chevy Equinox. For any hitch we do have replacement hardware, the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. Simply enter the hitch number in the "Hitch Item Number" box and select the manufacturer from the drop-down...
    view full answer...
  • Can I use the Class II Hitch From my 2014 Equinox for my New 2019 Equinox if not What is Recommended
    I'm sorry but the Curt Curt Trailer Hitch Receiver part # C12291 and the Draw-Tite Trailer Hitch Receiver part # 36408 the two class II options for your vehicle only go up to the 2017 model year for the Chevrolet Equinox. For your 2019 I recommend the Curt Trailer Hitch Receiver part # C98CR and if you need wiring the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118750. Both of these are custom made and confirmed to fit you 2019 Chevrolet Equinox.
    view full answer...
  • Will the Draw-Tite Trailer Hitch Receiver For a 2017 Chevy Equinox Work With Dual Exhaust
    The Draw-Tite Trailer Hitch Receiver part # 36408 for 1-1/4" and part # 76028 for 2" are both fits for a 2017 Chevrolet Equinox even those with dual exhaust. The trailer hitch mounts in front/behind the exhaust so there will be no issues.
    view full answer...
  • Towing Capacity of 2012 Chevy Equinox
    In my research, I found that the towing capacity for models with the 2.4L 4 cylinder engine is 1500 lbs, while models equipped with the 3.0L 6 cylinder engine have a 3500 lb towing capacity. I've confirmed this information with the owner's manual.
    view full answer...
  • Availability of an Anti-Rattle Device For a 1-1/4 Trailer Hitch on a 2005 Saturn Vue
    Hitch, ball mount, and/or accessory rattle can be annoying and it is a common ailment. Luckily, there is a cure. First, you can make sure that your trailer has the correct tongue weight. Tongue weight should be 10 to 15 percent of gross trailer weight when it is loaded and ready to tow. If tongue weight is correct, you can use an anti-rattle device. I recommend the Anti-Rattle Wedge, # RM-061-125. It is designed to fit in 1-1/4 inch trailer hitches like # 36408 on your 2005 Saturn Vue....
    view full answer...
  • Is There Drilling Required to Install the Draw Tite Hitch part # 36408 on 2014 Chevy Equinox
    There is no cutting or drilling required to install the Draw-Tite Trailer Hitch part # 36408 on your 2014 Chevy Equinox. Check out the installation instructions and install video I attached for this hitch. To complete your towing setup you may be interested in the following products as well. Trailer Wiring Harness part # 118494 (video attached) Ball Mount part # 36051 1-7/8 in Ball # 19256 2 inch Ball part # 19258
    view full answer...
  • Towing Capacity and Recommended Hitch for 2004 Nissan Altima 2.5 SL
    According to the owner's manual, your vehicle has a 1000 lb towing/100 lb tongue weight capacity. You'd need to ensure the trailer weight and tongue weight (amount of downward force exerted on the trailer ball) don't exceed those capacities. I'd recommend the Curt Class I trailer hitch, part # C11264. To complete your towing system, you'll also need the following: Hitch Pin and Clip # PC2 # 3592 ball mount Trailer wiring harness, part # C59236 1-7/8 inch trailer ball, part # 19256 or...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Mike H
Video Edited:
Mike H
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.