Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

See what our Experts say about this CURT Trailer Hitch

• Recommended Trailer Hitch Receiver For A 1982 Ford F-350 DRW With Deep Bumper
  Since your 1982 Ford F-350 DRW has the Deep Bumper I recommend the Curt 3-Piece Trailer Hitch Receiver - Multi Fit - Class V - 2" # C15511 as it will work with both 34" and 37-1/2" wide frames so you will not have an issue. The # C15317 you were looking at is only confirmed to fit the 1988-2000 Chevrolet C/K series pickups with the 10" drop bumper and would not fit your F-350. Keep in mind that while the # C15511 has a 1500lb tongue weight rating and 15000lbs trailer weight rating your...
  view full answer...
• Will the Curt Class V Hitch for a 1990 Chevy C/K Series Fit Both Short and Long Bed Models
  In regards to the Curt Trailer Hitch Receiver part # C15317 which is a fit for a 1990 Chevrolet C/K Series Pickup with 10" Deep Bumper, the installation will be the same for both short 6.5' and long 8' beds. There will be no difference between the two bed sizes in regards to the frame attachment holes. Please note, the hitch is designed to be used with an OEM style 10" deep bumper.
  view full answer...
• Curt Hitch Bolt Holes Will Not Line Up on 1998 Chevy K3500
  So there's one of two things going on here if your Curt 3-Piece Trailer Hitch Receiver # C15511 isn't lining up properly on your 1998 Chevy K3500 pickup. The first possibility, and the most likely, is that the hitch was slightly bent, or "flexed" during shipping. This is unfortunately common but also relatively easily remedied; I have added a link to a help article entitled "My Trailer Hitch Doesn't Fit" for you to check out which has solutions. The other possibility is that you have the...
  view full answer...
• Recommended Trailer Hitch Receiver For 1989 GMC K1500 4WD W/ 10 Drop Bumper
  For your 1989 GMC K1500 4WD Extended Cab with the 10" Drop bumper I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15317 as it is designed to work with the 10" drop bumper on your truck, and has a 2400lb tongue weight rating and a 16000lb trailer weight rating making it a very heavy duty hitch. While this hitch has high ratings your truck may not so I recommend checking the owner's manual to find your trucks towing capacity and using the lower ratings between...
  view full answer...
• Would Curt Hitch C15317 Fit 1996 Chevy K2500 with DMI Drop Bumper
  The Curt hitch part # C15317 is a confirmed fit for a 1996 Chevy K2500 with a 10 inch drop bumper. If the DMI bumper you have is a 10 inch drop bumper this hitch would work well for you. I looked up pictures of your bumper and it appears to be a standard 10 inch drop bumper so this should work well.
  view full answer...
• What is the Width of Curt Class V Trailer Hitch # C15317
  I spoke with Curt about trailer hitch # C15317 and the width. From the center of one bolt hole to the center of the other, left to right, it is 34-3/8 inches. A detailed or CAD drawing is not available because that is proprietary information. Keep in mind this is a custom fit hitch. So if you have a 1988 to 2000 Chevy or GMC C/K series truck with a 10 inch deep drop bumper then this is the correct hitch for you.
  view full answer...
  
• Determining Correct Trailer Hitch Receiver For 2000 Chevy K3500 DRW With Dump Bed
  I would be happy to help. The Curt Trailer Hitch Receiver # C15511 measures 33.26" wide, 5.562" between the two mounting holes closer to the rear of the truck, and 11.43" between the center and furthest forward mounting holes. The Curt # C15317 you were looking at measures 34-1/2" wide, 9-5/8" between the furthest forward mounting hole and the center mounting hole, and 4-7/8" between the center mounting hole and the furthest back mounting hole as you can see in the included diagram. Theses...
  view full answer...
  
• Recommended Heavy Duty Trailer Hitch For A 1997 Chevrolet C/K Series Pickup
  When installing a heavy duty hitch on your 1997 Chevrolet C/K Series Pickup The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2 inch # C15325 is confirmed for your vehicle and the centurion bumper. The curt hitch is a class five hitch that has a maximum towing weight of 16,000 pounds and a maximum tongue weight of 2,400 pounds. You will need to check your manual to find the proper towing capacity for your vehicle. No drilling is required for the installation of this hitch. The...
  view full answer...
• Recommended Trailer Hitch for 1997 Chevy C3500 with Service Body
  I do have some great trailer hitch options for a 1997 Chevrolet C3500 though none are designed for use with service bodies. That said, we do have options for models with a drop tube bumpers which would be the best option for models with service bodies since the hitch will have a lesser chance of interfering. I recommend the Curt Trailer Hitch Receiver part # C15317 which measures 7-1/4" from the flange to the top of the tube.
  view full answer...
  
• Parts Recommendation to Tow a 7,500 lb Trailer with a 2000 Chevy C1500 Truck
  First let's start with a hitch, if you do not have a 10 inch deep drop bumper you would want the Curt Hitch part # C15325. If you do have a drop bumper you would want the Curt Hitch part # C15317. Now for wiring you will need to start with a 4-way like the Tow Ready Wiring Kit part # 118315. To convert this to a 7-way and install a brake controller you will need the Brake Controller Installation and 7-Way Install kit part # ETBC7. I attached an install video and installation instructions...
  view full answer...
• Hitch Options for 1995 Chevy C/K Series Pickup Truck With 10 Deep Bumper
  For your 1999 Chevy C/K Series pickup truck with 10" deepdrop bumper you can use the Curt # C13099 with 5000 pound towing capacity, or if you need something beefier you could use the Curt # C15317 with 16,000 pound towing capacity. Both are made in the USA with a 2" receiver and bolt on without any welding. It has a nice gloss black powder coat finish.
  view full answer...
• What is the Height of the Side Mounting Brackets for the Curt Class V Trailer Hitch # C15317
  According to my contact at Curt, the distance from the mounting flanges to the top of the receiver on the Curt Class V Trailer Hitch, # C15317, is 7-1/4 inches. This hitch was designed to fit the Chevrolet and GMC C/K pickup trucks from 1988-2000 with the 10 inch deep drop bumper.
  view full answer...
  
• Fit and Compatibility of Deep Drop Trailer Hitch for a M35A2C
  I spoke to my contact at Curt and he informed me that the Curt hitch # C15317 center section measures 31-5/8 inches. The center to center mounting hole width with the flanges attached is 34-7/8 inches. He also informed me that the flanges on the # C15317 can be reversed if it helps to accommodate your M35A2C. This hitch will have a drop from mounting point to top of the receiver tube of 7-1/4 inches. Fitment cannot be confirmed since they have not performed a test fit on the vehicle. The...
  view full answer...
  
• Recommended Trailer Hitch Receiver for 1998 GMC Pickup with 10 Inch Deep Drop Bumper
  To get the highest towing capacity available on your 1998 GMC Truck I suggest the Curt Class V Trailer Hitch Receiver # C15317. This hitch has a gross trailer weight of 16,000 pounds and maximum tongue weight of 2,400 pounds. Of course you'll want to verify your truck's towing capacity since it will be the limited factor. All of the hardware is included to bolt this to your truck's frame. If you also need a ball mount, # C45340. This will keep you around the same weight capacity as...
  view full answer...
• Heavy Duty Trailer Hitch Receivers For 1989 Chevrolet C/K Crew Cab Pickup
  I cannot determine which rear bumper that you have from your picture so I will give you to options based on which bumper you have on your 1989 Chevrolet K3500 Crew Cab Pickup with the 8' bed. The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 is designed to fit your Chevrolet with the standard or step bumper. This class V receiver is capable of towing 15,000lbs or 16,000lbs if you use a weight distribution hitch. The tongue weight rating is 1,600lbs for either style hitch or hitch...
  view full answer...
  
• Trailer Hitch Recommendation for a 1992 GMC 3500
  Draw-Tite trailer hitch # 41947 fits the cab and chassis models of the 1992 GMC 3500 trucks. These are the trucks that do not come with beds and are turned into utility trucks, ambulance vehicles, and similar things like that. These trucks have a narrower frame width than the pickup models. If your truck's frame width is 34 inches wide measured from the outside of one frame rail to the outside of the other then this hitch will fit. If you have a regular pickup model with a standard/step...
  view full answer...
• Hitch and Brake Controller for 2000 GMC Sierra 3500 Pickup
  The 2000 model year was a split year for GMC pickups so checking hitch fits can be tricky. Curt Class V hitch # C15400 fits only the cab-and-chassis versions from 2001 forward; it does not fit your 2000 GMC Sierra 3500 pickup. If your 2000 Sierra pickup has a 10-inch deep-drop bumper you can use Curt Class V hitch # C15317. If it has a standard or step bumper you can use Class V hitch # C15325. If your Sierra has a factory 7-way you can install a trailer brake controller like the Prodigy...
  view full answer...
• Trailer Hitch Receiver Drop Heights For Tommy Gate Lift On a 1996 Chevrolet C2500 Pickup
  While we do not have a receiver that is specifically designed to work with your 1996 Chevrolet C2500 having the Tommy liftgate, I do have some measurements that may help you determine if one will fit your truck. You will need to measure the height from the frame mounts to where the top of the receiver will be to determine if it will clear the Tommy Liftgate. The Curt Trailer Hitch Receiver # C15325 is 4-1/4" from the frame mounts to the top of the receiver. This is designed for trucks...
  view full answer...
  
• Availability of Class V Hitch for 1997 Chevrolet C/K Series Pickup with 10-Inch Deep Drop Bumper
  We do offer a 2-inch Class V trailer hitch for your 1997 Chevrolet C/K Series Pickup with 10-Inch deep drop bumper. Curt hitch # C15317 offers a very substantial 2400-lb tongue weight capacity and a gross trailer weight rating as high as 17,000-lbs if used with weight distribution. If your truck carries a different weight rating then the lower-rated item becomes the overall limit. This hitch installs without drilling or welding using the included hardware. Your spare tire will need to...
  view full answer...
• Trailer Hitch for a 1996 Chevy K1500 with Roll Pan Bumper Installed
  What you will want to do is look at the hitches available for the 1996 Chevy K1500 with 10 inch deep drop bumper. These hitches come down lower and could work for you. Curt hitch # C15317 has the highest capacity of the options at 2,400 pounds tongue weight capacity and 16,000 pounds gross trailer weight capacity. But it measures 7-1/4 inches from the bottom of the frame to the top of the receiver. Check your truck to see if your could get away with 7-1/4 inches. If it will not work then...
  view full answer...
• No Weldnuts on 1992 Chevy C/K Pickup Truck to Install a Trailer Hitch
  If the rear most attachment points on the frame of your 1992 Chevy C/K truck do not have the weldnuts in the frame then they could have broken off or corroded away. It should be a C-channel frame so it would be easy to see if it is obvious that a weldnut was there. A professional welder could weld on some new ones for you without much time or cost. There should be 8 bolts to secure the brackets to the main tube of the hitch. Then there should be 6 more for a total of 14 bolts. Which 2...
  view full answer...
• Highest Rated Trailer Hitch for 1989 Chevy C3500 with 10" Deep Bumper
  The highest rated trailer hitch receiver we offer for a 1989 Chevrolet C3500 with 10" Deep Bumper is the Curt Trailer Hitch Receiver part # C15317 which is rated at 16,000 lbs gross trailer weight and 2,400 lbs tongue weight. It also offers bolt-on installation.
  view full answer...
• How To Find Correct Trailer Hitch Fit for 1993 Chevy K3500
  I have a few different trailer hitch options for a 1993 Chevy K3500. In order to choose the correct one you'll need to first determine if you have a cab and chassis model or a standard pickup. If you have a cab and chassis then you'll need to use the Curt 3-Piece Trailer Hitch Receiver part # C15511 but if not I simply recommend the Curt Trailer Hitch Receiver part # C15317 which is for standard pickup models. Unfortunately, the flanges of these hitch can be reversed and the mounting...
  view full answer...
• Trailer Hitch Recommendation For 1989 Chevy C/K Series Pickup
  We do have a custom fit hitch option for the 1989 Chevy C/K Series. I recommend Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41938 if you have a standard or step bumper. The Draw-Tite hitch is rated for 12,000 lbs gross towing weight and will bolt up to the existing holes in the truck's frame. If the truck has a roll pan bumper you have to use a Draw-Tite hitch part # 41522 or part # C15317 if you have a 10 inch deepdrop bumper by chance. I have attached a helpful article that shows...
  view full answer...

Do you have a question about this Trailer Hitch?