Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Plate works with 9/16" diameter U-bolts (sold separately) to attach your 2" square trailer axle to your 1-3/4" or 2" wide leaf spring.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we'll be reviewing part number 117594. This is Redline's U-bolt for 2 inch square trailer axles. The U-bolt plate is going to act as part of a trailer suspension system. It's going to help secure a square 2 inch wide axle to a 1 3/4 inch, or 2 inch wide leaf spring. It does require 2 U-bolts, that are going to measure 9/16 of an inch in diameter. If we take a measurement of the plate itself, it's going to give us a measurement of 5 1/2 inches by 4 inches. If we measure the distance between each hole, going this direction, it's going to give us a measurement of 2 3/4 of an inch. If we measure the distance, center on center this direction, it's going to give us a measurement of 2 5/8 of an inch. It's a raw steel finish, so it can be primed and painted.
Then, adding a rust protectant on there would be a good idea, before installing this product. That's going to do it for our review of part number 117594. This is Redline's U-bolt plate for 2 inch square axles. .
Average Customer Rating: 4.8 out of 5 stars (95 Customer Reviews)
Plate works with 9/16" diameter U-bolts (sold separately) to attach your 2" square trailer axle to your 1-3/4" or 2" wide leaf spring.Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience!
When I noticed that the leaf springs on my 44 year old boat
trailer had cracked I thought I would never find replacements.
I fully expected to have to have something custom built.
I was amazed when I found the fantastic diagrams/descriptions
dimensions for replacement springs on etrailer.com
The phone support person was wonderfully helpful in confirming
if items were in stock and ready to ship. The replacement springs
arrived on time and everything bolted up perfectly!
Thanks for such a great site!
Joev
10/27/2015
Hey Sean, I did this 3 and a half years ago. Its an old Shoreline trailer with a 19 ODay Rhodes 19. I suspect it might be just a little bigger than your daysailer. You should be able to get the correct parts for the trailer you have. Try to find a manufacturers plate on the trailer with modelyear... info and give eTrailer folks a call. Theyll make sure you get the correct parts. Ive used eTrailer for extensive re-ferbs of a few trailers. Good Luck! JoeV
I couldn’t find parts for my customers boat trailer . Nobody had a complete trailer axle . So I finally found etrailer they answered the phone I had all my measurements they took the time to search out what I was asking for . Awsome sales lady she knew what I wanted and found all my parts so I can replace the spindle on the axle
Nice to talk to a person instead of a answering machine
Thanks for your help
Springs & hanger kit worked well.
Used your videos to sort out pieces and to do the refurbishment on an adapted trailer for my International 110. Great support, timely delivery and good price; unlike the local guys who claimed that size wasn't made!!!
Thank you.
Perfect companion to the U-Bolts, part SP01-160. Used these to fix the jet ski supports which were breaking off the frame due to cracking welds.
Perfect fit. Solid construction.
U-Bolts and Plate.
Heavy duty, great service, fair price. Shipping was on time. Product mounted and functioned as expected.
William M.
12/12/2014
All good
Using these to move the axles under the leaf springs in a 1950 Spartan Royal Mansion. Better than the originals. Very satisfied!
John
4/29/2019
Very satisfied after 1 year. Some older trailers like my 1950 Spartan Royal Mansion, ride too low to the ground. One way to help this is to move the leaf springs over the axel from the under axel manufactured position. There is no “nest” for over axel mount, so you need a heftier plate and bolt to crank it on in hopes it holds. This product is heftier and was perfect for the application.
Great product, as described, description of the measurements fit right on.
I would & have recommend E-trailer to friends.
Rich M.
10/27/2017
Fit and works as described, Im happy with the product.
Needed plates for my new 2" axle over existing 2" springs that came with my HF folding trailer. I swapped my axle, but couldn't swap the springs due to their shorter length and I didn't want to weld a new spring brace. These plates are very thick compared to the OEM plates I had, so I'd assume it will support well over the maximum load on my trailer. Worked like a charm with the square u-bolts I also ordered from etrailer.
The products etrailer supplies are superior. The only confusing part is when I tried to track it provided a UPS tracking number, however, when it was delivered it came via Post Office so the tracking number never completed its routing foremat. No worries and no problem we got the items fine, but things got shifted in transit for some reason. thanks again!
Erika was super helpful. Really helped me get the correct parts the first time. I will always use etrailer from now on!!
A+++ in my book!
Ed R.
9/17/2017
SUPERB!!!!!!!! Erika at E-Trailer is AWESOME!!!!
Bought everything to completly rebuild my trailer. All products were good quaility and fit perfectly. The outstanding service was the best part. Never have done trailer work before and I called and talked to support. Got me everything I needed and it was all correct. Upgraded my shipping for free and I still recieved my order quicker than they told me I would.
Installed 2 new slipper leaf springs that had broken on a 1977 Skipper-B boat trailer. Total time for installation was less than 2 hours, product is as good as new.
Made it super easy to attach my upgraded springs and very beefy! no more tire rub with heavier loads!
Full trailer restoration and conversion to disc brakes. Great products.
Delivered quickly, reasonably priced and went on without any issues. Been using the repaired trailer for 1 year.. Good supplier that I'll use again if needed.
U bolts (2”x 5 3/4”) are an excellent replacement for the leaf spring u bolts on a 1950 Spartan travel trailer. The bolt itself is a larger gauge than the originals as well. Very satisfied with the product, service was excellent, and delivery fast as promised.
PRODUCT WAS JUST WHAT I WAS LOOKING FOR. IT DID THE JOB WELL AND I WOULD PURCHASE TRAILER PARTS AGAIN WHEN NEEDED FROM YOUR CO. DON
Everything I've received from ETRAILER has "fit like a glove".
Excellent service, products and price.
Dave
Used these on my boat trailer after installing new leaf springs and U-bolts. Worked great. Bolt hole pattern was perfect.
It is very difficult to find quality service this day and age; however, I don't have enough great things to say about etrailer. Amazed at how fast it was shipped. Thanks for making this beginner's first leaf spring swap easy.
My second purchase from etrailer and I am happy to say the results were as expected 1. Items as described 2. Delivery was on time as promised (Of course once it is out the door it depends on the carrier to make the promise good) 3. Customer service is stellar, notifications... we got your order....we shipped it today.... we were notified it was delivered.... are you happy
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sean S.
10/26/2015
hey Joe. Im just curious what type of boat and trailer you are working on because Im doing the same thing to my 1977 sunbird daysailer. Im just wondering if you are working on the same trailer and what parts you used and liked!