Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(215 reviews)
Price: $229.31
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13186
Retail:$390.95
Our Price: $229.31
You Save: $161.64
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (215)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13186
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13186 Curt Class 3 Trailer Hitch Receiver
Replaces 13129
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2019 Ford Escape
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13186
Average Customer Rating: 4.8 out of 5 stars (215 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Tim 02/10/2024
2017 Ford Escape
I purchased this hitch receiver for a 2017 Ford Escape. This was the 2nd hitch receiver that I purchased from etrailer.com (the first was eight years earlier for a 2011 Kia Soul), so I knew I could expect a great product with excellent service. The hitch arrived quickly, and installed quickly (except for enlarging the wholes in the frame... thanks, Ford) as shown in the help videos. I bought the hitch receiver to use with my bike rack, and still happy 1 year later.
by: Amber06/21/2023
I had this installed on my Ford Escape to haul my moped around. That's all I used it for, so it works perfect for me. Very happy with my purchase and would highly recommend any of my friends/family to order here.
by: Dustin10/28/2021
2018 Ford Escape
The hitch came in bent. Was told to bend it back? Shouldn’t have to bend it back.
Dustin
10/29/2022
Haven’t used it but maybe a couple of times. Regardless it is still worth having. This is my second hitch that I have bought from etrailer and I will continue to buy from them. Great team and product.
by: Ryan07/31/2019
This Hitch is great was a breeze to install with some help from a good friend and there are no complaints here fits just a specified with no issues
I have had this for a year On My 2013 Ford Escape
Use it for taking trash to the Dump, as well as got a nice 5X8 Trailer for hauling my tractor and motorcycles and other things.....Not disappointed
Ryan
8/2/2020
EXCELLENT!! Still loving this hitch, hauling my trailer loaded with everything from A-Z has been well worth the time and effort to install thanks etrailer!!!
by: Jordan 10/13/2023
Ford Escape
Installation was as planned and the hitch works great! Again, the videos helped a lot. For my make and model (2014 Ford Escape) there was a lot of messing around to cut metal from my car and fish bolts through the frame, but the product and accessories had everything I needed.
by: Christine02/20/2018
Ford Escape
Best made trailer hitch on the market today, I put this trailer hitch on myself with the video on my iPad (easy step by step instructions). Took me a couple of hours to install hitch and wiring harness. Loved how it tucked up under my Ford Escape and all you see is the receiver end of the hitch. Use it today to haul a utility trailer and boat to my favourite fishing holes. Best value for a well built hitch. Thanks e-trailers for the speedy shipping (free by the way) and great product. Have recommended your product to everyone that asked where I got the hitch from. Thanks again. I am sure your product will last longer than this vehicle, and I know I will definitely order your product on my up and coming vehicle purchases.
by: Ervin S06/09/2018
2013 Ford Escape
I'm very pleased with this product, mostly because it feels really solid. It looks like it could handle any trailer I may decide to pull with it. The product arrived promptly and without any damage.
The installation instructions were adequate and I was able to install the hitch myself, although it took a lot of strength and finesse to fit it into place over the top of the muffler. It would be good to have two people. The wires to fish the bolts into place worked brilliantly. That feature saved lots of time and effort.
I like the look of the hitch under the car, since it is very unobtrusive. My Ford Escape has a feature by which you can trip the sensor to open the rear door by putting your foot underneath the bumper. (Great for when your hands are full). Fortunately, this feature still works, even though the hitch sits directly under the sensor.
Although I may use the hitch to pull a small camper in the future, the main reason I installed it was for a bike carrier rack. I love it. See photos.
by: Donald 05/01/2024
2014 Ford Escape
Perfect fit
by: Trey07/10/2020
This worked great. Could not have done it without the helpful videos found on the site. I had to use car ramps which made it a bit more challenging to move the hitch in place but other than that, the installation was easy. One thing I found looking around was to use my impact drill/driver and a rasp bit to grind down the opening to get the bolts in. Speaking of bolts, make sure you thread those on the fish leads. Almost lost one in the frame to being lazy. Don't let that be you. Install took an hour for me with it being a little tricky to get the bolt nuts on and making sure everything was just right.
The pics are after our first road trip. I should have done this a long time ago.
by: Rory06/05/2020
So far so good. Installation was a little tough without a lift but manageable. People should be sure to have a helper when it comes to getting the hitch into place. I added some pictures with a ball attachment added. I haven't installed the trailer wiring kit yet but when I do I will write a review about that. Shipping was quick and the price was great. Thanks for your quick service and high quality products.
by: Kevin McWilliams06/26/2021
Bought this for my girlfriend's car, was ready to install, but more complicated than I wanted it to be, lol. Took about 90 minutes to install by myself. Love this thing so much I bought one for my son & his girlfriend's jeep, it comes next week. HIGHLY RECOMMENDED!! If we ever need another hitch, this is where I'm coming back to!
by: Rene06/05/2018
2017 Ford Escape
Product fit well, definitely need two person for installation ease but doable solo. Maybe 1.5 hrs solo.
Well built and sturdy!
Rene
6/5/2019
It has worked great, does what I bought it for. Well worth the price and great solid quality.
by: Marshall G06/05/2021
Have installed hitches 30 years ago, what a pain they where. This hitch was simple!!! Enjoyed the ease with this curt hitch. I would recommend these hitches to anyone. I am 65 years old, did have my (35year) help side it in. Other than that I did the work myself in the drive way on ramps
by: Jim03/08/2015
2014 Ford Escape
Fit like a glove. The Youtube videos are very helpful. I watched the installation videos of a few models before I decided on the hidden hitch - C13186.
As an added suggestion, my shop cut the muffler pipe then welded it back - it made the installation much easier.
P.S. Please disregard the double copy of one of the photos. The un-named one could not be removed once I uploaded it.
by: Doug W.11/20/2016
Pontiac Trans Sport Van
Very happy with product, easy installation, quality product, great for DIYers. Daughter using to transport her mountain bikes. Everything they said it was. Would recommend without hesitation. Excellent customer service from Gorge. He was very knowledgeable. Plan to order other products in future.
by: Tim08/10/2018
2015 Ford Escape
Everything I ordered showed up in good condition. Install and videos are spot on. If you are somewhat mechanically inclined you should be able follow along and have success. Definitely need a second hand getting hitch up in place. Oh yeah the items I bought for this install was $6 cheaper than Amazon prime and basically shipped just as fast
by: Tom05/24/2021
This Receiver fit perfect and very well made.
Its is great to find a company that is so good at what they do.
Integrity and Quality out standing and the install video's the best.
I installed this receiver by myself witch was difficult and awkward.
Video said it will take two people and they were right. I still got it done and turned out perfect, it took me 2 1/2 hours.
by: Ron E09/26/2015
2013 Ford Escape
What a wonderful product. It is extremely well made, fits perfectly and looks beautiful. I am so happy I chose the Curt and especially all the support from etrailer.
by: Greg M.06/05/2017
2014 Ford Escape
The Curt Trailer Hitch was very easy to install and fit perfect! Would recommend highly. Great packaging and very fast service!
by: Philip Smith08/14/2019
The install was not hard. Just take your time and have a friend who is happy to crawl under the opposite side of the back of your rig. Quality is excellent. Don’t have a photo of the hitch but I have one of it in use you can kinda see the hitch
by: Lawrence02/27/2018
Timely shipping and good communication. Thanks again. Plan on using for bike rack but got 2 inch because may need larger receiver size in future.
by: Anthony 05/08/2023
Very high-quality product. Well written instructions made the installation go very smoothly. I would recommend an extra hand for the final steps of this project.
by: David04/07/2022
Great product excellent installation videos. Went in almost as easy as the video made it seem. Definitely a little on the heavy side to install alone but managed anyway.
by: Chad 07/27/2022
This was easy to install and has worked very well for us since we've had it!
Well built design, sturdy and rigid! Very pleased with this!!
Chad
7/27/2023
This product is great! Easy install on our 2016 Ford Escape.
by: Brian 10/31/2023
Was easy to install .
25
215
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Correct Curt Trailer Hitch Receiver for a 2018 Ford EscapeThe correct Curt Trailer Hitch Receiver for a 2018 Ford Escape is part # C13186. This trailer hitch offers a bolt-on fit without any drilling required. It will work great for towing or hitch mounted accessories like bike racks and cargo carriers. It has a class III rating for greater capacity with 2" receiver tube opening for greater variety of accessories.
view full answer... - Trailer Wiring Recommendation for a 2013 Ford EscapeThere are basically two different styles of wiring harnesses available for your 2013 Ford Escape that we offer. There is the kind that plug in-line with the factory wiring of your tail lights like the Tow Ready Custom Fit Vehicle Wiring # 118566 that you referenced and there are the kind that have to be hard-wired like the Tow Ready Custom Fit Vehicle Wiring # 119179KIT. We currently do not have any connectors that would plug into the OEM connections under your vehicle, you may check with...
view full answer... - Trailer Hitch And Wiring For 2013 Ford Escape That Will Not Interfere With Tailgate SensorsPer Curt, the hands-free tailgate sensors areas will be limited to either side of the vehicle near the exhaust pipes when installing part # C13186. We do have another option for you though. I recommend the Draw-Tite Max-Frame Trailer Hitch, part # 75782. This hitch crossmember sits a little higher than other hitches because the receiver tube is mounted on the underside of the crossmember. I called Draw-Tite and they told me that because the majority of the hitch is tucked up and out of...
view full answer... - Is Heat Shield Trimming Required for Install of Curt Hitch part # C13186 on 2016 Ford EscapeYes, to install the Curt hitch part # C13186 on your 2016 Ford Escape will require you to trim part of the heat shield. In the install video I attached you can see how this is done. I also attached a diagram that I took from the instructions that shows where to trim.
view full answer...
- Least Visible Trailer Hitch Recommendation for 2019 Ford EscapeThe 3 trailer hitches with the most hidden receivers for your 2019 Ford Escape are the Curt # C13186, the Draw-Tite # 75782, and the etrailer.com # e98866. Since they all have the same profile it really boils down to what style suits you best. If you plan on towing then I recommend the Draw-Tite because it has an integrated wiring mounting bracket that really gives you a clean looking installation. If you only plan on using the trailer hitch for accessories like a bike rack or cargo carrier...
view full answer...
- Trailer Hitch and Wiring for a 2014 Ford Escape SE AWDLike you said, the 2014 Ford Escape SE requires a different hitch than the 2013 models. If you like the Curt hitches then # C13186 would be the best option. To complete your towing set up I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And for trailer wiring you can use # 118566. I have linked a video showing installation for you.
view full answer... - Trailer Hitch and Wiring for a 2016 Ford EscapeI will be happy to get you set up with the parts you will need to tow with your 2016 Ford Escape. First, you will need a trailer hitch. There are both Class II and Class III hitches available for your Escape. I recommend the more robust Class III because they are built tougher and stronger than a Class II and there are more accessories available for a Class III. Curt hitch # C13186 is a popular option. Please note that with this or any of the hitches for the 2016 model we have heard that...
view full answer... - Replacement Hitch Installation Hardware Kit for Curt C13186 for 2013-2019 Ford EscapeIt sounds like you're looking for the mounting hardware kit for a Curt # C13186 hitch which is a confirmed fit on the 2013 - 2019 Ford Escape. You'll want to use the Replacement Hardware Kit # RHK and in the field on that page where it says "Hitch Item Number" put in the C13186 in order to get the mounting hardware for this hitch.
view full answer... - Recommended Hitch Receiver and Wiring Harness for 2018 Ford Escape SEI have a solution for you, but the Curt # 13368 is not the hitch you're looking for since it's designed to fit on the Ford F-150. Instead you're looking for the Curt # C13186 which is a confirmed fit on the 2018 Ford Escape SE and will provide you with a 2" receiver. The Curt hitches have a much more durable powder coating than the other hitches on the market, so it's built to withstand the rigors of the road much better and will help keep rust and corrosion away. If you're going to be...
view full answer... - Trailer Wiring Needed To Tow A Boat Trailer With A 2017 Ford Escape Hey Josh, If your 2017 Ford Escape has a tow package then you'll see a 7-pin round connector around the trailer hitch to plug the Hopkins # 30955 in. If you don't have this package/connector then you'll need the Tekonsha T-One Vehicle Wiring Harness # 118715. This will transfer your Escape's light signals through to the trailer. If your trailer has electric brakes then you'll need the # ETBC7 along with a brake controller. If it doesn't have brakes then the 4-pole is all you'll need....
view full answer... - Curt Hitch Mounting Hardware Replacement Kits for 2013 Ford Escape The hardware kits for the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" item # C12111 and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13186 are the same. For either Curt hitch receiver you will need the Replacement Hardware Kit for Trailer Hitches item # RHK. You will need to type your hitch item number in and select the manufacturer. This will give you a complete hardware kit to replace yours.
view full answer... - Trailer Hitch and Ball Mount to Tow Trailer Level with a 2016 Ford EscapeAll you will need is a ball mount that has the proper rise to achieve the 17 inches you are needing to tow the trailer level. The hitches such as # 75758 and # C13186 for your 2016 Ford Escape measure 13-1/4 and 13-1/2 inches from the ground to the top of the receiver opening when we installed them on 2016 Escapes. A ball mount with a 4 inch rise, # C45070, is exactly what you would need to tow the trailer level. The tongue weight of the trailer will pull down some and compensate for...
view full answer... - Will Curt Hitch part # C13186 Fit a 2014 Ford Escape S The Curt hitch part # C13186 that you referenced has been confirmed as a fit for your 2014 Ford Escape S model as it is a fit for all models of the Escape in your year. The exhaust will not be an issue at all. I attached an install video for you to check out as well.
view full answer... - Will a Hitch from a 2011 Ford Escape Fit a 2019 Ford Escape? I have a great hitch solution for you. Even though it depends 100% on the hitch model you have, none of our hitch manufactures carry a hitch that fits from a 2011 Ford Escape for a 2019 Ford Escape. With that being said, you most likely need a completely new hitch for your 2019 Ford Escape. For that route, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13186. Not only does this hitch provide you with 350 pounds of maximum tongue weight capacity and 3,500...
view full answer... - Trailer Hitch Recommendation for 2017 Ford EscapeThe Curt # C114123 is the # C11412 hitch packaged with their # C45521 ball mount. The hitch is a fit for a VW Golf, and wouldn't fit your 2017 Ford Escape. For your2017 Escape, I'd recommend the US made Curt Class III hitch part # C13186. If the choice is available, I'll always recommend folks go with a class III hitch with the 2 inch receiver opening because you'll have a much better selection of hitch mounted accessories available. To complete your towing system, you'll also need a...
view full answer... - Will the Curt and etrailer Hitches for 2019 Ford Escape Allow Hands Free Liftgate FunctioningI can confirm that both the etrailer # e98866 and Curt # C13186 hitches are both confirmed on all models of the 2019 Ford Escape including the Titanium and I do recommend going with the etrailer branded hitch # e98866 because of the durable powder coating that's used. This powder coating helps prolong the life of the hitch and reduce scratches that might otherwise rust. In most cases the Hands-free Liftgate sensors will be limited to either side of vehicle near exhaust pipes, but it will...
view full answer... - Will the Hands Free Lift Gate Still Work with a Trailer Hitch Installed on a 2013 Ford EscapeOn the 2013 Ford Escape with Curt trailer hitch # C13186 installed, the Hands-free Liftgate sensor areas will be limited to either side of the vehicle near the exhaust pipes. So it will still work it just has a more limited range with the hitch installed. I have included a link to the installation instructions for you to view. To complete your towing set up I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag....
view full answer... - Pictures of Curt Trailer Hitch # C13186 Installed on a 2013 Ford EscapeThere are some excellent pictures shown in the instructions for Curt trailer hitch # C13186 which I have linked for you and included here. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For wiring use # 118566. I have linked a video showing a typical installation and a link to the instructions for you.
view full answer...
- Parts Needed to Equip 2014 Ford Escape for Towing Small Pop-Up TrailerAccording specs I've located online, the 2014 Ford Escape will have a 2000 lb towing capacity if equipped with the 1.4L engine or 3500 lb if equipped with the 2.0L. You should be able to pull that pop-up with no problem. I would recommend a transmission cooler like # D13502 if you plan on pulling the camper in a mountainous area, though as it would offer inexpensive protection for your transmission. For a trailer hitch, I'd recommend the Curt Class III hitch, part # C13186. The trailer...
view full answer... - 2013 Ford Escape SEl Trailer Hitch Compatibility with Lift Gate SensorsThe Curt Trailer Hitch Receiver - Class III # C13186 is the correct fit for your 2013 Ford Escape and my recommendation over the Class II- 1-1/4 inch # C12111. They utilize the same mounting, but the Class III is much stronger and will allow more accessory options in bike racks, cargo carriers, and ball mounts. With either option the Hands-Free Liftgate sensor areas will be limited to either side of vehicle near exhaust pipes. If you want a stronger hitch, with the Hands Free sensors...
view full answer... - What Trailer Hitch Receiver will Fit a 2017 Ford Escape SThe 2017 Ford Escape S has a set of turndown exhaust pipes that are different than the other sub-models. The only Curt hitch that is a confirmed fit for the S edition is indeed part # C13186. The Curt Trailer Hitch Receiver is a Class III hitch with a 2" receiver tube opening. This hitch is made right here in the U.S.A and comes with everything needed for installation. You can see the hitch installed on a similar 2017 Ford Escape which I have attached for you but since it is not an S edition,...
view full answer... - Trailer Hitch Recommendation for a 2014 Ford Escape SEFor a trailer hitch for your 2014 Ford Escape SE you would want the Hidden Hitch part # 87627. This hitch has plenty of capacity and would do well to tow your pop up. You would want to also check the owners manual of your vehicle to determine it's towing capacity and be sure not to exceed that figure. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
view full answer... - Trailer Hitch Fit For 2016 Ford EscapeCurt trailer hitch # C13186 will fit both a 2015 and 2016 Ford Escape. The hitch installation does require trimming of a heat shield under the vehicle. No drilling is required but an access hole may need to be enlarged. I have included a link to a video showing an example installation for you.
view full answer... - Are Fishwires Included With Curt Trailer Hitch Receiver # C13186According to the installation instructions for the Curt Trailer Hitch Receiver # C13186 there are six 7/16" fishwires included to help get the bolts in place to mount the hitch. I've attached a short video below that will walk you through the installation.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Andrew L
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Jonathan Y
Written by:
Laura H
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Bradley B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
10/28/2021
Hitch receiver brackets can sometimes flex so they seem like they will not align with the bolt holes on your vehicle. This is a common occurrence and can be fixed with tips in the attached help article. If you try the steps and cannot align it, Customer Service will be happy to help with further options.
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx