Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Fit of Curt Class I Trailer Hitch # C11393 on a 2010 Mazda 3 Sedan
  The Curt Class I hitch you referenced, part # C11393 is indeed a fit for your 2010 Mazda 3 Sedan. If you click the provided link, you can see our Returns Policy. I've also linked you to the installation instructions and a video showing the hitch being installed on a 2012 Mazda 3.
  view full answer...
• Will Curt Trailer Hitch Receiver Contact Exhaust on 2012 Mazda 3 Sedan
  The Curt Trailer Hitch Receiver # C11393 will not contact the exhaust on your 2012 Mazda 3 sedan.
  view full answer...
  
• What Vehicles Are a Fit for Curt Class I Trailer Hitch # C11393
  The Curt light-duty Class I trailer hitch receiver you referenced, part # C11393, is a fit for the sedan versions of the 2010-through-2013 Mazda 3 with or without LED taillights. This particular hitch fits no other vehicles. The hitch comes with all required installation hardware and the process is shown in the linked video. I also linked for you two articles with helpful tips for hitch installation as well as an article that reviews hitch classes.
  view full answer...
• Curt Trailer Hitch Receiver Fit on 2012 Mazda 3 S Grand Touring Sedan
  I checked with the manufacturer for you, and can verify that the correct fit for your 2012 Mazda 3 S Grand Touring Sedan is in fact the Curt Trailer Hitch Receiver # C11393. I have added a link below to a video install for you to check out as well of the Curt Hitch # C11393.
  view full answer...
• Draw-Tite Trailer Hitch for 2010 Mazda 3 Sedan
  I do have a solution for you, however the Draw-Tite # 24843 will not fit a 2010 Mazda 3 Sedan. The hitch to fit your Mazda 3 Sedan is the Curt # C11393. The # 24843 will fit the Speed 3 and hatchback models but not the sedan.
  view full answer...
• Can Inflatable Boat and Outboard Motor be Safely Carried on Aluminum Cargo Carrier on 2010 Mazda 3
  Based on what you have described the aluminum carrier should have no problem handling the 200 pound estimated weight of the carrier and boat/motor combined. You will just need to make sure not to exceed the capacity of the trailer hitch on your 2010 Mazda 3. Since you are right at the hitch capacity it would be a good idea to stow the motor in the vehicle it at all possible. You can reduce the stress on the hitch receiver by also using a stabilization strap such as # 18050, or another...
  view full answer...
• Is Stabilizer Strap Needed for Bike Rack with Curt Class I # C11393 on 2011 Mazda 3 Sedan
  The provisions of the Curt Class I # C11393 hitch warranty requires the use of a stabilizing strap like part # 18050 for non-trailer loads like a cargo carrier or bike rack. Keep in mind, the hitch manufacturers punch a stop into the receiver tube of a Class I hitch that will prevent the shank of Class II accessory from being used. This is done because a Class I hitch has a limited tongue weight capacity (maximum amount of weight that can be safely suspended from the receiver) when compared...
  view full answer...
• Trailer Hitch Availability for 2012 Mazda 3 to Allow Use of Hitch-Mount Bike Rack
  The Draw-Tite Sportframe Trailer Hitch Receiver you referenced, part # 24816, fits the Mazda 3 up through model year 2009, but I can tell you the correct hitch fit for your 2012 Mazda 3 as well. You can use the link provided to see our main page for hitches for the 2012 Mazda 3. Using the Select Vehicle Style drop-down menu at the top of the page you can select the particular version of the 3 that you have. For example, if you have the hatchback you can use # 24843 from Draw-Tite; if you...
  view full answer...
• Trailer Hitch for 2010 Mazda 3 Hatchback
  Unfortunately, we don't purchase used hitches. Your best bet would be continue your efforts to sell your existing hitch and replacing it with the Curt # C11393 class I hitch. Between Craigslist, Ebay and your local online buy/sell/trade groups, you should be able to unload the hitch if its priced right.
  view full answer...
• Correct Curt Trailer Hitch Receiver for a 2012 Mazda 3
  The Curt Trailer Hitch Receiver part # C11393 is only a fit for sedan models whereas the Curt Trailer Hitch Receiver part # C11383 is for hatchback models. The two hitches are not cross-compatible so you'll need to obtain the correct one for your specific application.
  view full answer...
• Curt Hitch that Fits 2010 Mazda 3 Sedan
  Hey Dylan, so Curt has a hitch that fits the 2010 Mazda 3 sedan with the part # C11393 but the # C11383 only fits the hatchback models.
  view full answer...
• Recommended Trailer Hitch for a 2012 Mazda 3 i Grand Touring
  I can recommend a trailer hitches for your 2012 Mazda 3 i Grand Touring. If your Mazda is a Sedan use the Curt hitch part # C11393. If it's a hatchback use the Draw Tite part # 24843. Both of them install faily easily with included bolts. I've also linked install videos of each of them for you. If you get the Curt hitch, it requires an additional strap like part # 18050 when carrying unsupported loads like bike racks or cargo carriers. This is a condition of their warranty. Draw-Tite...
  view full answer...
• Bike Rack Options for a 2010 Mazda 3
  The Swagman XTC 4 bike rack you currently have is not compatible with the Class I receiver like the Curt # C11393, which is the only receiver available for the 2010 Mazda 3. Due to the size of the vehicle, as well as the rigidity of the area where the hitch attaches to the vehicle, the hitch will only be able to safely accommodate 200 lbs of tongue weight, or downward force. You will also need a stabilizer strap like # 18050 which is required by Curt. In order to make the 2-inch shank...
  view full answer...
• Choosing Correct Hitch for 2013 Mazda 3 Sedan
  When you are choosing a hitch, it makes no difference if your Mazda 3 has incandescent or LED taillights as the taillight assemblies have no bearing on the fit of the hitch. The Curt Class I receiver you referenced, part # C11393 will fit regardless of which taillights your vehicle uses. Grand Touring models of the Mazda 3 are equipped with LED taillights, which will make a difference if you are wanting to install a trailer wiring harness. If you do NOT have the LED lamps, you can use...
  view full answer...
• Will Draw-Tite Trailer Hitch # C11393 Fit a 2010 Mazda 3 Sedan Regular Touring Model
  The Draw-Tite Trailer Hitch, # C11393, will actually fit the 2010 Mazda 3 sedan Touring or Grand Touring models. I have included a link to the installation details for reference. You will need the recommended ball mount. You can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you will need T-One Vehicle Wiring Harness, # 118420. I have included a link to the installation details and a video showing a typical installation.
  view full answer...
• Trailer Hitch and Wiring For 2012 Mazda 3 Grand Touring Sedan
  The trailer hitch I recommend for your 2013 Mazda 3 sedan is the Curt Class I Receiver Hitch # C11393. The recommended drawbar for this hitch is the Curt Drawbar # C45521. I have attached an installation video of this hitch on a similar 2020 Mazda 3 for you. I strongly recommend checking your owner's manual for the towing capacity of your vehicle, but the hitch offers a gross trailer weight capacity of 2,000 pounds with a maximum tongue weight of 200 pounds. You will want a hitch ball...
  view full answer...
• Which Curt Trailer Hitch Wiill Fit a 2010 Mazda 3 Sedan Non-Grand Touring Model
  The Curt Trailer Hitch, # 11383, is designed to fit the 2010 and 2011 Mazda 3 Hatchback but not the sedan. I have included a link to the trailer hitches available for the Sedan, Non-Grand Touring model for you to view. The equivalent hitch for your 4 door Mazda 3 is Curt Trailer Hitch, # 11393. I have included a link to the installation details for reference. The hitch comes with the recommended ball mount, pin and clip. You can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch...
  view full answer...
• Trailer Hitch Recommendation for a 2011 Mazda Speed3
  There are trailer hitches that will fit the 2011 Mazdaspeed 3 hatchback, but the Draw-Tite # C11393 will not fit. Instead, you can use the Curt Trailer Hitch, # C11383. This hitch comes with a ball mount, hitch pin and clip. I have included a link to the installation instructions and a link to a video showing a typical installation. If you plan on doing some towing, for a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use T-One Vehicle...
  view full answer...
• Does Curt Trailer Hitch Fit 2012 Mazda 3 Sport Sedan With Dual Exhaust
  I checked with the manufacturer for you, and can confirm that the Curt Trailer Hitch # C11393 will fit your 2012 Mazda 3 Sport sedan with dual exhaust. The exhaust sits far enough back that there won't be any type of interference with the hitch. I have added a link below to a video install on a similar model year Mazda 3 for you to check out of the Curt Trailer Hitch # C11393. This is a Class I hitch so if you are looking to use it with a bike rack, for example, you will need a Class...
  view full answer...
• Hitch and Wiring Recommendation for a 2010 Mazda 3
  Depending on the style of your 2010 Mazda 3 we have exactly what you would need for a hitch and wiring. If you have a hatch back you would want the Draw Tite hitch part # 24843 and if you have a sedan you would want the Curt # C11393. If you have the LED taillights you would want the # 119178KIT that is a protected module that draws power from the positive post of your vehicle battery to power the trailer's taillights. If you don't have the LED taillights you would instead want the # 118420....
  view full answer...
• Trailer Hitch and Bike Rack Recommendations for a 2013 Mazda 3 with or without LED Tail Lights
  Draw-Tite trailer hitch # 24843 happens to fit the 2013 Mazda 3 hatchback with or without LED lights so you can use it. If you have a sedan then use the Curt hitch # C11393. It will also fit sedan models with or without LED tail lights. Both of the hitches mentioned are Class I trailer hitches with 1-1/4 inch receivers. This means that you will need a Class I compatible bike rack and you can carry up to 2 bikes maximum. For a bike rack I recommend the Swagman Trailhead, # S63360. It fits...
  view full answer...
• Bike Rack Recommendation for 2010 Mazda 3 Carrying Carbon Frame Bike
  For a carbon frame bike a hitch bike rack that holds the bike by just the tires is the only safe option. Trunk racks all touch the frame which is something you need to avoid with carbon frame bikes. So for a hitch you'd need the Draw Tite # 24843 if you have a hatchback or the Curt # C11393 if you have a sedan. For a bike rack I really like the Kuat Transfer V2 Bike Rack for 1 Bike # KU64FR. This is a platform bike rack that only touches the bike at the tires and only weighs 26 lbs. The...
  view full answer...
• Trailer Hitch & Wiring For 2011 Mazda3 Sedan
  The Curt Trailer Hitch # C11393 is a great option for your '11 Mazda3 Sedan because it is a bolt-on installation that does not require drilling into your Mazda to install, and is mostly concealed except for a part of the receiver. C45521 which does come with a pin and clip to keep it secure to your hitch. For a hitch ball, the correct one will depend on the size of your trailer's coupler; you will need either 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258. To add a 4-flat to power...
  view full answer...
• Will Swagman XTC-2 2-Bike Platform Rack Work On 2011 Mazda 3
  There are two different Swagman XTC-2 2-Bike Platform Racks, part # S64670 which is fixed is class I or part # S64671 which is a tilting rack is only class II rated. The fixed rack will work on a 2011 Mazda 3 with the Curt Trailer Hitch Receiver part # C11393 for sedans or part # C11383 for hatchbacks but there is no way to used the above tilting rack.
  view full answer...

Do you have a question about this Trailer Hitch?