What Vehicles Are a Fit for Curt Class I Trailer Hitch # C11393

Question

Question:

What other vehicles can a Curt c11393 fit. I have a 2012 mazda 3 sedan.

asked by: Gabe

0

Expert Reply:

The Curt light-duty Class I trailer hitch receiver you referenced, part # C11393, is a fit for the sedan versions of the 2010-through-2013 Mazda 3 with or without LED taillights. This particular hitch fits no other vehicles.

The hitch comes with all required installation hardware and the process is shown in the linked video. I also linked for you two articles with helpful tips for hitch installation as well as an article that reviews hitch classes.

expert reply by: Adam R

0

Answer 1

The Curt Trailer Hitch Receiver #C11393 will not contact the exhaust on your 2012 Mazda 3 sedan.

view full answer...

Answer 2

All three components of the Rhino Rack part numbers #RRVA118B-2, #RRRLKVA, and #DK289 would be needed. The bars, the feet, and the adapter kit that attaches the feet to the factory fixed mounting holes of the roof of the vehicle.

view full answer...

Answer 3

Based on what you have described the aluminum carrier should have no problem handling the 200 pound estimated weight of the carrier and boat/motor combined. You will just need to make sure not to exceed the capacity of the trailer hitch on your 2010…

view full answer...

Answer 4

Realistically there isn't much difference between the two extenders you referenced aside from price. Both are extenders that go from 1-1/4 to 2 inch and are both right at 6 inches in length. If it were me I would go with the Curt #C45785 over the…

view full answer...

Answer 5

I have another option, but using a 1-1/4 inch to 2 inch adapter like the Curt Trailer Hitch Receiver Adapter #C45785 will reduce the maximum tongue weight rating of your trailer hitch receiver by 50%. Due to the weight of your Thule T2 Classic 4 Bike…

view full answer...

Answer 6

The Curt Class I hitch you referenced, part #C11393 is indeed a fit for your 2010 Mazda 3 Sedan. If you click the provided link, you can see our Returns Policy. I've also linked you to the installation instructions and a video showing the hitch…

view full answer...

Answer 7

You have done your research. As you have seen, all of the hitches for the 2010 Mazda 3 are Class I trailer hitches. The Draw-Tite and Hidden Hitch models do have the safety notch in them that prevent the insertion of a Class II accessory. This is so…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

What Vehicles Are a Fit for Curt Class I Trailer Hitch # C11393

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching