Will Swagman XTC-2 2-Bike Platform Rack Work On 2011 Mazda 3

Question

Question:

Hello, I want to find out if the Swagman XTC-2 will work with a class 1 hitch on my 2011 Mazda 3 Sport. Thank you..

asked by: Peter M

1

Helpful Expert Reply:

There are two different Swagman XTC-2 2-Bike Platform Racks, part # S64670 which is fixed is class I or part # S64671 which is a tilting rack is only class II rated.

The fixed rack will work on a 2011 Mazda 3 with the Curt Trailer Hitch Receiver part # C11393 for sedans or part # C11383 for hatchbacks but there is no way to used the above tilting rack.

expert reply by: Conner L

1

Answer 1

I can confirm for you that the Swagman Chinook #S64683 weighs 47 lbs. This is a tilting and folding rack that fits 1-1/4" and 2" hitches, comes with an anti-rattle hitch lock and has a weight capacity of 45 lbs per bike. It holds your bike…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Michelle, the Hollywood Racks Destination bike rack part #HLY94FR that you referenced is a really great bike rack that is compatible with Class I hitches like the Curt part #C11200 that you have installed on your 2011 Lexus CT 200H. It's very…

view full answer...

Answer 7

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 8

Hello again Michelle. The Saris Glide EX Bike Rack #SA774 will indeed fit a 2023 Hyundai Tucson with a class 3 hitch. The tilt feature will allow the hitch to open and close normally. Saris bike racks are definitely good quality. They are all made…

view full answer...

Answer 9

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Will Swagman XTC-2 2-Bike Platform Rack Work On 2011 Mazda 3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching