Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(827 reviews)
Price: $184.94
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13322
Our Price: $184.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (827)
- Q & A (0)
- Photos
- Used (1)
CURT Trailer Hitch - 13322
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- CURT
- 600 lbs TW
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13322 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1999 - 2013 GMC Sierra 1500
- 1999 - 2004 GMC Sierra 2500 LD
- 2007 - 2007 GMC Sierra Classic 1500
- 2007 - 2007 GMC Sierra New Body 1500
- 1999 - 2013 Chevrolet Silverado 1500
- 1999 - 2004 Chevrolet Silverado 2500 LD
- 2007 - 2007 Chevrolet Silverado Classic 1500
- 2007 - 2007 Chevrolet Silverado New Body 1500
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13322
Average Customer Rating: 4.9 out of 5 stars (827 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Sean07/13/2022
I ordered this hitch in May. It took a couple of weeks to ship. I contacted etrailer and like most companies in this day and age, help is tough to come by. Once the item shipped, I received it very quickly. Installation wasn't difficult. My truck is 10 years old, so I really thought the old bolts would give me a hard time. They weren't too bad to remove. The new hitch went on quite easily. My truck is a 2012 Silverado 1500
by: Scott B.08/31/2017
2012 Chevrolet Silverado
I opted to purchase a Curt trailer hitch for my truck. Sheila took my order over the phone and made sure I had the right product for my 2012 Chevy Silverado. Great service. I received the hitch in perfect condition. Watched the installation video and it went on just as easy as I expected it would. Great product and a great price with free shipping. I highly recommend etrailer.com for anyone who needs a great reliable product supplier. Thanks again!
Scott B.
9/4/2018
Still in great shape. Cant say enough about etrailer.com. Great product. Great people.
by: Kennie05/09/2023
2001 Chevrolet Silverado
hitch looks great, it was easy to install on my 2001 Chevrolet Silverado, no drilling required.
by: Eric 04/25/2024
2008 Chevrolet Silverado
Really pleased with product. Arrived timely, bolted right up to my truck with little effort. I have used it a couple times a week for a year and it has held up very good. Would buy again.
by: Justin07/29/2018
2000 Chevrolet Silverado
Seems like a good hitch . If my bumper wasnt a bit out of wack it would have mounted right up after some banging on the bumper it went right on even around my dual exhaust, So Happy. Shipping was fast and as described and a great price. Can't wait to tow my new travel trailer.
Justin K.
7/29/2019
Works great, towing my travel trailer
by: Gary10/01/2021
Perfect fit, easy install, nothing else to say! My original hitch rusted out great replacement.
Gary
10/2/2022
The hitch is a perfect replacement would recommend to anyone needing a hitch
by: John R06/21/2013
2011 Chevrolet Silverado
Received the hitch wednesday and installed it thursday. The install went great, I took my time and installed it in about a little over an hour. Everything aligned properly, and fit like a glove on my 2011 Chevy silverado. Glad I got the curt hitch, it looks beefy and heavy duty, like a factory install. Glad I installed it myself, the dealers around here want about $500 to install the whole deal. Watched your install vids, they were very helpful. Googled trailer hitches on the internet and you guys came up, so I thought I'd give you a try. Completely satisfied doing business with etrailer.com. Shipping was fast, price was right. Here's a few pictures. Thanks Guys, John
by: Ed08/23/2020
2007 GMC Sierra New Body
Just installed the Curt Trailer Hitch Receiver to my 2007 GMC Sierra New Body Style and it went smooth. This replaced an old rusted out OEM hitch receiver and the Curt fit like a glove. I was able to install it on my own with the help of a floor jack raising it up in the middle and finger tightened the two bolts under the bumper then bolted up the rail bolts. I then removed the floor jack and torqued down all the bolts slid in the Curt ball mount and secured it with the included pin and cotter pin and I was back to towing my Waverunners to the harbor for some fun.
by: Edd T.06/16/2018
2007 Chevrolet Silverado
My 2007 Classic Silverado Crew Cab 4x4 did not have a factory hitch receiver, so I selected the 13322 Curt Hitch Receiver because it closely resembles the OEM hitch receiver and attaches to the bottom of the bumper. Installation was easy, as shown in the videos and described by other reviewers. All holes aligned perfectly. I did not remove the spare tire as it is not necessary. I used two jack stands to raise/support the receiver frame in place while I started the first bolts. I had the 22mm and 19mm sockets needed to tighten and torque the bolts/nuts. It looks great and I now am able to tow.
For the wiring I installed the 30955 Hopkins 7-Way and 4-Way Trailer Connectors to the bumper adjacent to the license plate. This required drilling a 2-1/8" hole in the bumper, which was time consuming, but it now resembles a factory installation. I was able to remove the license plate and connect to the factory plug.
I ordered these parts from etrailer for a number of reasons: 1) The website is intuitive and contains a tremendous amount of information for the person who is trying to research product information; 2) the selection and inventory is amazing; 3) the prices are very competitive – free shipping for orders over $99; and 4) the dedicated customer service is outstanding – the email communication is prompt. I ordered on a weekend and it was delivered by the following Friday.
A very positive first experience.
by: FOPMAN12/04/2015
Lexus
The customer service Rep: Lexus G. was extremely helpful in directing me to exactly what I needed! Upon receiving the package, I was impressed with the way that the items where protected for shipping. The overall quality of the Hitch and Trailer Connector Socket where impeccable. The entire removal and installation of both units took no more than 35 Minutes. Thanks to to instructional Video!
I am Very impressed with the Company, Service and most of all the Hitch and Light Connector. Thank You so very much eTrailer for everything.
Frank "D"
by: Scott04/19/2018
2008 Chevrolet Silverado
I recently was getting ready another season of towing my boat and landscaping equipment. I inspected my trailers and all the lights. While installing the receiver into the hitch I noticed a small hole in the hitch frame. After further investigation I noticed the hitch was in bad shape. I looked around at different hitch suppliers and found etrailer. Great price great service. All hardware included installed myself.
Thank you
by: Pete06/09/2017
2003 Chevrolet Silverado
Ok so I received it in 3 days which is great for free shipping and the next day the wife and I got off work at 2 where she went to get grand kids from day care and I went home to put on hitch. Got home and took out tools, got myself a talk glass of ice water because it's 107 here in AZ and dropped tire, took ball off bumper, and bolts off frame and installed new hitch. I put tire back under truck and was rolling with trailer on just before 3 and even before wife got home. Very easy and fit great. Can not beat the cost for this being so easy.
by: Bill G.04/10/2020
Excellent replacement for a factory hitch or for a truck that didnt come with one originally equipped. All hardware included and of nice quality. Instructions easy to follow and clearly printed. No drilling required. Bolts into existing threaded holes in bumper support and bumper brackets where attached to frame of truck. Third set of holes use a carriage bolt, large washer and nut through and existing hole in frame near the leaf spring mount. Threads in bumper support may need rust cleaned out with a tap (14mm x 2.0 thread pitch) if a factory hitch was not installed and truck has lived in the rust belt states. Some minor trimming was required of the bumper plactic covers on my particular application. A sawzall or a hacksaw with a fine tooth blade works great and leaves a clean cut. Otherwise installation time was about 20 to 30 mins using air tools and a lift. Product price and shipping was great, recieved hitch packaged nicely and undamaged within a few days of placing order.
by: Tyler M.10/13/2017
2006 Chevrolet Silverado
Super fast shipping especially with it being free shipping! Hitch Arrived on the day it was scheduled and I had it installed in about forty-five minutes along with the trailer wiring kit. I plan on using it this weekend to tow my camper to the beach. Everthing looks great. Thank you guys for your promt service!
by: Jeffrey 04/19/2024
2013 Chevrolet Silverado
Good job!!. Fast work on getting order out.UPS was a little slow but in all very satisfied.
by: Mark06/27/2021
2008 Chevrolet Silverado
Quick easy install, once hitch came into stock, I had it very quickly! Customer was happy!
Mark
6/28/2022
Installed this hitch about a year ago, still working good, good finish, and holding up great.
by: Mike 04/15/2024
great company
by: Cm04/18/2024
Great fit for Chevy Silverado and shipped immediately
by: Douglas01/13/2018
2004 Chevrolet Silverado
I ordered this hitch late in the day on Jan 10th. I received it on Jan 12th just after noon. I was told it would likely take 4 business days. It took less than 48 hours and was shipped for free. I am not a mechanic but the installation took only about 20 minutes. Total cost for the hitch and electrical connector was much less than the quote I received from a local company to install the same hitch. Awesome hitch, awesome deal, awesome company. I am now a huge etrailer.com fan now!
by: Charles C.04/01/2016
I called in my order as I still like to talk to a sales person rather than online, it was quick and professional. My hitch shipped for free and arrived within 4 days. I went to mount it and it didn't line up and I was mad, then I remembered backing into a post years ago pushing in the bumper a half an inch. I grabbed my sledge hammer and resolved the issue. My hitch then was simple to mount and friends perfectly! Thank you!
by: Charlie11/16/2016
2002 Chevrolet Silverado
Recently bought the curt pn 13322 for 02 ecsb silverado. Packaged well, exxtremely good quality, was a pain to install due to bent bumper and one bolt broken off from previous owner but not etrailer.com fault. Pulled a 20 ft car hauler today and checked it afterwards, no issues whatsoever. Would definitely recommend. Check your bumper alignment prior to install.
by: Chris08/03/2018
2003 Chevrolet Silverado
Trailer hitch and wiring kit showed up on time great product ,great price ,easy to install. Trailer hitch and wiring only took 20 minutes to install. My beer didn't even get hot before I was done.
by: Mark04/16/2023
The hitch was perfect. Did not like the wiring trailer plug bracket did not fit well because it interfered with the hitch and had to be drilled to work
by: Fleet Manager07/10/2023
etrailer made it easy to order and shipped in a timely manner. The hitch was easy to install and fit as intended.
by: Brad12/16/2017
2009 Chevrolet Silverado
Put it on a 2009 Silverado 1500 LT. I had been concerned when looking other places for something compatible with my custom dual exhaust.
The webpage took me RIGHT to where i needed to be. Now it's ALL as it should be, tucked in right above my exhaust! One stop shopping took care of me! Thanks etrailer!
25
827
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- How Much Can a 2005 Chevrolet Silverado 1500 Z71 with the 4.8L Engine and 3.42 Gears TowYes, the 2005 Chevrolet Silverado 1500 that you are looking at has a 6,700 lb towing capacity so long as it has an automatic transmission but if it has a manual transmission then it will only have a 4,700 lb towing capacity. If you look at page 4-76 in the owner's manual for a 2005 Chevrolet Silverado you will see the figures that I referenced.
view full answer... - Recommended Trailer Hitch to Replace Factory Hitch on 2001 Chevy Silverado 1500Based on my research, it appears the factory trailer hitch on your 2001 Chevy Silverado 1500 was bolted to the frame. If you are looking to install a replacement hitch, I recommend looking at the Curt Class III Round Tube Receiver Hitch # 13322. This Class III trailer hitch is custom-fit for your truck and will provide you with a 2 inch receiver opening and a 6,000 pound towing weight capacity. The hitch features a gloss black powder coat finish over a protective base coat that will offer...
view full answer... - Does Curt Hitch # 13322 Fit 2003 Chevy Siverado 4x4 Short BedYes the Curt hitch part # 13322 that you referenced does fit the 2003 Chevy Silverado 1500 short bed trucks. The install video I attached shows this hitch installed on a 2003 Silverado short bed just like yours.
view full answer... - M14 Bolts for Trailer Hitch 13322 Will Not Thread Into Weld Nuts on a 1999 Chevy SilveradoThe likely problem is that the weld nuts on your 1999 Chevy Silverado have corrosion and road grime in them and will need to be cleaned out prior to threading the bolts in. This actually comes up a lot on any vehicle that has seen at least one winter. I have included a link to are help article that explains how to clean out the weld nuts so you can install the bolts. You do not want to force the bolts in because you could end up breaking a weld nut. And you would not want to use a different...
view full answer... - Availability of 2 Inch Receiver for 2011 Toyota PriusAll the hitches we offer for a Prius are Class I with a 1-1/4 inch receiver. I do know in the past there was a company that offered a 2 inch receiver for a Prius, but it is no longer available. It could be possible to find a used one. Try doing a Google search on 2 inch Receiver for 2011 Toyota Prius, you might have some luck with that. When using a 2 inch receiver on a Prius, there is always the chance that somebody will try to use a hitch accessory that is too heavy for the vehicle....
view full answer... - What Vehicles Does Hidden Hitch Trailer hitch 89003 FitThe discontinued Hidden Hitch 89003 will fit the following vehicles: 1980 - 1986 Ford, F-100, F-150, F-250, F-350, Except w/Custom Fascia 1987 - 1991 Ford, F-100, F-150, F-250, F-350, All Styles 1992 - 1996 Ford, F-150, F-250, and F-350, All Styles 1997 Ford, F-250 and F-350 Heavy Duty
view full answer... - Torque Specs for Installing Curt Trailer Hitch Receiver # 13322 on 2005 Chevy Silverado When installing the Curt Trailer Hitch Receiver # 13322 on your 2005 Chevy Silverado 1500, you will need to torque the rear M14 bolt to 126 lb-ft and all the 1/2 inch fasteners to 110 lb-ft. I have attached an installation video that you can use for reference, along with the written instructions that you can take a look at. This Class III hitch features a 2 inch receiver and a 6,000 pound towing weight capacity. Since the hitch will use existing holes in the truck's frame, no drilling...
view full answer... - Will the Curt Trailer Hitch Receiver 13322 Fit a 2001 Chevy Silverado Step SideThe Curt Trailer Hitch Receiver part # 13322 is listed as a fit for a 2001 Chevrolet Silverado (All Models). The stepside and fleetside models have the same frame so this will not be an issue. I don't have any reference to the frame hanger brackets you mentioned but I have attached for you below a photo of how the trailer hitch installs on the frame.
view full answer...
- Can CURT Hitch #13322 Be Installed On a 2011 Chevrolet Silverado Without Removing the Spare TireThe instructions for the CURT Class III 2 Inch Hitch, part # 13322, say to remove the spare tire temporarily to install the hitch on your 2011 Chevrolet Silverado. It is for easier access to the most forward bolts on the hitch and in case you will need to move the hitch around when lining the holes up and attaching the bolts. I am including a link to the installation instructions on the CURT hitch. We have two video installations of this CURT hitch. One is installed on a 2010 Chevrolet...
view full answer... - Curt Trailer Hitch 13322 Will Not Fit 2003 Chevy Silverado 1500 SS Models But What Does SS MeanWhen you are talking about GM products, SS can mean only one thing: Super Sport. There was a regular SS and a Dale Earnhardt Intimidator SS. Since you have an LS you do not have to worry about the SS restriction. I have included a link to a video showing an installation of Curt hitch # 13322 on a 2003 Chevy Silverado 1500.
view full answer... - Bolt Hole Spacing for Curt Class III 13322 Trailer Hitch The bolt holes of the Curt # 13322 Class III hitch are 39.37 inches apart center to center for the set of holes closest to the rear bumper and 39.44 inches apart for the set closest to the front of the vehicle as shown in the provided photo. The hitch is a confirmed fit for a 2003 Chevy Silverado 1500. I've linked to an install video showing the hitch being installed on a 2003 Chevy Silverado 1500.
view full answer...
- Dimensions of Curt Class III Receiver Hitch # 13322 to Clear Aftermarket Exhaust of 1999 SiveradoMy Curt representative tells me that the distance from the top of the mounting flange where it would mount to the underside of the frame member to the top of the crossbar where it meets the side flange would be 2-3/4 inches. The crossbar is 2-1/2 inch round tube stock, so the distance from the top of the mounting flange to the underside of the crossbar at the side flange is 5-1/4 inches. The drop of the hitch, which is the distance from the mounting flange to the top of the crossbar at...
view full answer...
- Dimensions of Curt Trailer Hitch part # 13322The distance from left to right on the Curt hitch part # 13322 between the mounting holes on center is 35-5/8 inches and the distance from the mounting surface down to the top of the hitch opening is 5-1/2 inches.
view full answer...
- Does Curt Hitch part # 13322 Fit a 2008 Chevy Silverado 1500The Curt hitch part # 13322 is a confirmed fit for your 2008 Chevy Silverado 1500. It's pretty easy to confuse which bolt holes are to be used for installing a hitch when looking at the frame underneath the vehicle. I attached a picture that shows how and where the hitch installs to the truck frame. Your truck would be no different as long as you do in fact have a 2008 Silverado 1500. There would be no drilling required to install the hitch either.
view full answer...
- Does Curt Trailer Hitch # 13322 Fit 2005 Chevy Silverado 1500 StepsideFor your 2005 Chevy Silverado 1500 stepside the Curt hitch part # 13322 is a confirmed fit that will work well. I attached an install video for this hitch for you to check out as well.
view full answer... - Is Fascia Trimming Required to Install Curt Trailer Hitch 13322 on a 2012 Chevy Silverado 1500On some years that Curt trailer hitch # 13322 fits, there may be some trimming of the rear fascia for the hitch to fit properly. It is not necessary on all models but you will only know once you go to install the hitch. The area that would need to be trimmed would be at the bottom center of the rear fascia. It is an area that is 6-1/2 inches across and 3 inches tall measured from the bottom of the fascia. On the 2012 though it does not appear that trimming is required. I have included...
view full answer...
- Does the Curt Trailer Hitch Receiver 13322 For a 2002 Chevrolet Silverado Come with HardwareYes, the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2002 Chevrolet Silverado does come with all of the mounting hardware that you need for installation. This hardware bag consists of carriage bolts, hex head bolts, flange nuts, and conical tooth washers.
view full answer... - Is Spare Tire Removed When Installing Curt Trailer Hitch On 2005 Chevrolet SilveradoWhen installing the Curt Trailer Hitch, part # 13322 on your 2005 Silverado, the spare is removed while installing the hitch. The spare is placed back in its original location under the bed of your truck. It is removed only temporarily so the hitch can be installed. You can check out the attached installation instructions to see how this hitch is installed on your truck.
view full answer... - Recommended Factory-Like Trailer Hitch for 2008 Chevy Silverado 1500The trailer hitch I recommend for a 2008 Chevrolet Silverado 1500 is the Curt Trailer Hitch Receiver part # 13322 which has a factory like fit and finish at half the price. The capacities will also meet or exceed that of the factory trailer hitch as well. Please note, we only offer aftermarket trailer hitch solutions not factory options.
view full answer... - Will Curt Trailer Hitch Fit 2004 GMC SierraI went and took a measurement and found that Curt trailer hitch # 13322 measures 41" all the way across where it mounts to the frame. This hitch will fit a 2004 GMC Sierra 1500 or 2500LD. If you have a different model Sierra let me know and I can find the correct fit for you.
view full answer...
- What is the Towing Capacity of a 2004 Chevy Silverado 1500 with 4.8 LiterThe towing capacity of your 2004 Chevy Silverado 1500 with 4.8 liter motor will depend on several factors including the bed length, cab style, rear end ratio, transmission type, and whether it is 2-wheel or 4-wheel drive: 2-Wheel drive models: Regular cab, short box, automatic, with 3.42 rear end = 6,500 pounds; long box = 6,300 pounds Regular cab, short box, automatic, with 3.73 rear end = 7,500 pounds; long box 7,300 pounds Regular cab, short box, manual, with 3.42 rear end = 4,500 pounds;...
view full answer... - What Vehicles Does the # 89012 Hidden Hitch Work OnThe hitch you have is a Class III Hidden Hitch and it will fit the 1999-2003 Chevrolet and GMC pickups.
view full answer... - Would Curt Hitch 13322 Work Well Installed on 2001 Chevy Silverado Towing Small TrailersIt certainly wouldn't hurt if you went with a higher capacity hitch than needed, but if you are staying under the capacity of the lower rated hitch # 13322 you would be perfectly fine with it as well. This hitch has a 6,000 lb trailer weight capacity which should be plenty for your small trailers. I attached a link to an install video for this hitch for you to check out as well.
view full answer... - Will Curt Trailer Hitch Receiver # 13322 Fit with Spare Tire on 2011 Chevy Silverado 1500The Curt Class III Trailer Hitch Receiver # 13322 referenced in your question is confirmed to fit your 2011 Chevy Silverado 1500 and will fit with the spare tire as long as it is the stock/factory size. If you have changed out the original spare tire with a larger size, it's possible that it will not fit with the hitch installed. I confirmed this with my contact at Curt. The stock spare tire will need to be removed temporarily during installation but can then be reinstalled once the hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Robert C
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sean
7/14/2023
A year later hitch is great!