Dimensions of Curt Trailer Hitch part # 13322

Question

Question:

What are the dimensions of the Curt 13322? drivers side frame hole to passenger side frame hole? also height from frame to top of 2inch connection point?

asked by: Adrian G

0

Expert Reply:

The distance from left to right on the Curt hitch part # 13322 between the mounting holes on center is 35-5/8 inches and the distance from the mounting surface down to the top of the hitch opening is 5-1/2 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The 2015 E450 is only produced as a chassis or a cutaway van chassis, so I assume you're speaking of a RV on a van chassis. The Draw-Tite #65053 is a fit for the 2015 E450. I've confirmed this with Draw-Tite.

view full answer...

Answer 2

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…

view full answer...

Answer 3

We have the Curt hitch part #C15845 which fits your 2016 Ford F-450 Cab and Chassis and is a 2-1/2 inch trailer hitch. This has a capacity of 20,000 lbs too.

view full answer...

Answer 4

I do have a possible solution for you but there are no custom fit hitches designed for converter Ford E-series vans. What you could use is a weld-on hitch. I have included a link to the weld-on hitch options we offer. The issue is that the bodies…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C15410 has a measurement of 12-1/2" from the face of the receiver to the bolt hole nearest the receiver. I have attached a picture showing the dimensions for the bolt holes as well as the receiver distance. The…

view full answer...

Answer 6

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

view full answer...

Answer 7

The only styles of hitches that can be made to fit a service body truck like your Freightliner P700 or M45 are universal hitches like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop item #15901.

view full answer...

Answer 8

While we do have an option for a hitch for your 2005 Ford E-450 cutaway, there isn't a custom fit. So the best option is a universal service body hitch, which can either be welded or bolted on. The right one is going to depend on the height of…

view full answer...

Answer 9

If your 2015 Jayco Greyhawk Motorhome with a 2015 Ford E-450 Super Duty chassis utilizes the common 8 on 6-1/2" bolt pattern, then I recommend the Dexstar Steel Mini Mod Trailer Wheel, part #AM20794. I've linked to a video review of this…

view full answer...

Answer 10

The Curt Trailer Hitch Receiver part #C15845 that you referenced is a confirmed fit for a 2016 Ford F-550 cab and chassis with frame rails spaced 34" apart (outside to outside). However, Curt does not test this trailer hitch with dump body…

view full answer...

Answer 11

I had our warehouse measure the Curt Trailer Hitch Receiver #C15703 you were looking at, and has an overall width of 40-5/8", overall length of 29". The distance between the vertical mounting holes is 14-1/2" center to center, and the…

view full answer...

Answer 12

The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center #41945 is a confirmed fit for 2000 - 2003 Ford Van Full Size and may fit your chassis. I recommend checking the dimensions of the frame holes as this hitch's mounting holes are…

view full answer...

Dimensions of Curt Trailer Hitch part # 13322

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching