What Vehicles Does the # 89012 Hidden Hitch Work On

Question

Question:

i have a tow package that i bought from someone and of course it does not fit my truck. im triying to sell it and it would help to know what truck this belongs to. its an 89 series 89012 thankyou

asked by: cory

0

Expert Reply:

The hitch you have is a Class III Hidden Hitch and it will fit the 1999-2003 Chevrolet and GMC pickups.

expert reply by: Robert G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

Answer 5

There is one hitch available for the 2023 Kia Telluride. It is the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Telluride with included hardware. I confirmed with the manufacturer this also fits the 4WD models. I really like…

view full answer...

Answer 6

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 7

To install a brake controller like the #5504 that you referenced you only need to connect it to 4 wires. If you find more wires on your vehicle than would be needed to install the controller you wouldn't need to do anything with them. I attached…

view full answer...

Answer 8

The TorkLift Custom Frame-Mounted Camper Tie Downs #TLC2204 and #TLC3206 that you referenced are designed to fit the 2003 Chevy Silverado 2500 with the 8 foot bed (without a board/step under the bed and without a trailer hitch). If you have the…

view full answer...

Answer 9

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...

Answer 10

The correct wiring harness for your 2024 Kia Telluride SX Prestige X-Line is the Curt #C29ZV. This plugs into the connection points in your rear cargo area and is compatible with your LED lights. The #TK74CR is only designed to work with the LX and S…

view full answer...

Answer 11

The Stealth Hitches Hidden Rack Receiver item #391KIATELL20 you were looking at would be a great option if you do not want to see the hitch at all when you're not using your Yakima EXO system. It has been confirmed to fit the 2023 Kia Telluride…

view full answer...

Answer 12

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

view full answer...

What Vehicles Does the # 89012 Hidden Hitch Work On

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching