Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13130
Retail:$270.95
Our Price: $162.90
You Save: $108.05
Confirmed to Fit
2015 Acura RDX
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (354)
- Q & A (0)
- Photos
2015 Acura RDX - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 4000
- Concealed Cross Tube
- CURT
- 600
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Acura RDX's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum tongue weight: 600 lbs
- Not intended for use with weight-distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13130 CURT Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
It may be necessary to see a local Acura dealer for a relay. The relay is needed to activate the tow package wiring circuit. No drilling required for installation
Complete Towing Package for 2015 Acura RDX
Retail:$270.95
Package Price:$201.35
2015 Acura RDX Owners Who Purchased This Trailer Hitch Also Bought...
Popular RDX Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13130
Average Customer Rating: 4.8 out of 5 stars (353 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Michael 03/17/2024
The hitch has been great! I use it to carry my buke rack. Installation was easy once I cleaned out the welded nuts on my car's frame.
by: Toni03/26/2018
2015AcuraRDX
The Acura dealership charges $750 for a trailer hitch installed. I was hesitant to buy my own hitch for installation because I thought something that expensive must be really hard to do. NOT AT ALL! Thank-you etrailer.com for the video that gave me the confidence to install this on my 2015 RDX. Written Instructions were easy to follow. Took about 30 minutes to unbox, install, and breakdown the box it was shipped in. Once installed, this hitch is almost undetectable (looks great). I am a 42-year-old woman and did need my husband’s help to hold the hitch in place while I tightened the bolts. I purchased this hitch for use with a bike rack and it looks and works great!!
by: Dino K09/12/2015
AcuraRDX
Just leased new Acura RDX and wanted to install a hitch and bike rack. E=Trailer's web site and customer service (Christine) were top notch. I loved the personal attention and the You Tube videos on how to install the hitch. It took me about an hour but I was able to get underneath the car and follow the instructions. The handle nuts are the key to holding this hitch in place. It helps to bend them for easier access. Once you do that, it's a snap.
Dino K.
9/14/2016
I stand by my original review. Still enjoying the hitch and bike rack. Thanks for checking in.
by: Rich D06/27/2017
2017 AcuraRDX
Received my hitch in less than a week. One end had broken thru the box but there was no damage. This is a really nice quality product.
Installation tips. Get the back of the car high. I used my ramps. The hitch has to be rotated up into place. A little awkward for one person so I had my son help. Took about 5 minutes to install.
I'm pleased.
Rich D.
6/27/2018
Now that I’ve had the opportunity to use my hitch I do have a comment. Keep in mind that my comments most likely apply only to my vehicle, a 2017 Acura RDX. The hitch sits low and too far forward. It was almost impossible to install the hitch pin without laying on the ground under the back of the car. I believe it is designed that way to make the hitch less visually intrusive. Also if it were higher, the rear valance on the car may have to be cut. I bought a hitch extender which also lifted the receiver a few inches. This works out much better.
Rachael H.
6/27/2018
Thanks for the follow up Rich, I did want to let you know that most hitch extenders do reduce the towing capacity of the hitch by up to 50 percent.
by: TIEN Boston Athletic10/17/2023
The product made in the USA- Great!
I'm buying this product primarily Made in USA.
But the processed sent to customer completely destroying the product Made in USA.
No quality control during packaging at the warehouse to customer(s). Scratches and permeate dents to peeling of the original paint and coding.
If I was the owner, I would fired the person in charging the quality product that Made in USA to customer with great care.
Remembering this- it is heavy, no additional styrofoam nor any bubbles wrap, etc. just the hitch in a box- that's all during shipment. Puncture the box due to heavy hitch inside.
by: Sathyanarayan07/23/2020
2013 AcuraRDX
Prefect fit and Solid heavy built, comes with required nuts and bolts and precise instructions. Was able to install myself with the instruction videos provided on the website. Had tough time cleaning the rust from the frame screw holes. Would strongly recommend the additional tools and accessories suggested on the website, these included the rust cleaning brush and liquid.
Sathyanarayan
7/24/2021
Going great as anticipated.
by: Steven09/29/2021
Extremely disappointed in what I received. This brand new Curt hitch was "packaged up damaged" in multiple areas and sold as "new." A small portion of the damage is from freight mishandling but shame on Etrailer for letting this out the door in this condition and selling it as "new."
Brooke M.
10/12/2021
Thank you for leaving a review! It is not our policy to ship damaged items. Our customer service team should be reaching out to you in the near future.
by: Jericho11/19/2022
Installation is Pretty straight forward, took me about 20-25 mins installing, i would imagine it will be a lot quicker to install with an extra set of hands but otherwise really happy with the result, very low profile no crazy brand names visible like the one they install at u-haul. Yup would definitely recommend
by: SJ07/06/2014
2013 AcuraRDX
Acura RDX 2013 -hitch self install ~45 minutes
1) Make sure you have the 19mm socket , extender 6" or longer adapter and calibrated torque wrench. The location of the bolts is a bit finicky in the rdx and these tools help a ton if you are doing it by yourself
2) Especially if you are doing it yourself get some zip ties very long ones from home depot to hold the hitch in place temporarily (double the zip ties at each location so it doesn't snap). This thing is quite heavy and suggest you do it carefully and take the time to gently raise the hitch with some support boxes (have to do it at an angle and slide the hitch into place to align with the bolt holes due to the bumper on the way). Some have mentioned to bend the bumper , but I did not do that. raising the hitch carefully at an angle and sliding into place to align with the bolt terminals then zip tie and start to secure with the supplied bolts
3) And oh the washer has a teeths which needs to face towards the hitch .THIS is IMPORTANT
Overall looks excellent very clean finish , I am curious to know how corrosion resistant the assembly is over time ...
Thanks to folks at etrailer for excellent communication and the website layout is helpful to find recommendations and accessories
by: Vici08/05/2023
The hitch is perfect for our bike rack to use on my Acura RDX.
My Husband installed it himself (he is very resourceful).
Definitely would recommend.
by: John03/25/2022
Easy,one-person installl once you figure out how to get and keep,it in place whilst lying on your back -yes, it can be done. The lighting harness was a simple fit, but I did have to add the fuse. I hauled a uhaul trailer on a 2000 mile round trip, no problems.
John
3/26/2023
Great. Getting a trailer from UHaul every so often to haul trash, green waste and furniture, and having a comfortable SUV is the way to go rather than a big pickup! Easy install.
by: Phill G04/21/2015
2015AcuraRDX
Perfect fit for my 2015 RDX. Excellent packing and quality product. Installed easily thanks to instructions and video. Only issue was tack weld securing nut to handle was defective. One was not lined up properly to allow bolt to enter and the other just fell off. This required a little MacGyvering with a glue gun and additional lock washer.
by: Mark R10/20/2017
2016 AcuraRDX
The Curt Trailer Hitch Receiver for my 2016 Acura RDX arrived in excellent condition and was quite easy to install. The instructions that came with the Receiver were easy to follow but I did have a problem. The handle nut stripped out while tightening torque specs. I have a Craftsman Commercial Micro Adjusting Torque Control Wrench. I called eTrailer and they assured me that the torque specifications in the instructions were correct. Based on their assurance, I can only conclude that my torque control wrench is not calibrated correctly and the Curt Trailer Hitch Receiver deserves 5 stars.
by: L Rafael02/07/2015
2015AcuraRDX
Heavy-duty solidly built bike hitch. Holes lined up just right to frame of my SUV (2015 RDX). Took me (a senior) about 35 mins to install, I just followed instruction sheet and UTube video. Now I just have to decide on a bike carrier.
by: Ryan08/28/2020
2015AcuraRDX
Not enough stars to rate. I needed the hitch by end of the week. Ordered it on Monday and it came on Wednesday. Super fast, instructions super clear, and all items needed were there. If I ever need hitch and accessories, I will not hesitate to use etrailer. Fantastic!
by: David 12/30/2021
2016 AcuraRDX
Perfect fit for my 2016 Acura RDX. I was able to install it in my garage with the wheels on the garage floor using the recommended tools and safety gear (safety glasses and gloves). Perfect for my bike rack.
David
1/3/2023
No problems after a year of use. I only use it for my bike rack, which can hold 4 bikes. I typically carry only one, but have carried 3 on occasion. So, I havent tested its class III capacity in any way yet, but Im very happy with it.
by: Martin02/05/2022
AcuraRDX
I got the hitch, watched a quick video of the install and within 30 minutes had it installed. Fortunately the Accura RDX I installed it on was set up for a direct install with nut-plates and access holes available. The position of the hitch is nicely concealed below the bumper.
Martin
2/6/2023
Solid as a rock. Has worked well for all my needs and is recessed from view and is conveniently in the shadow of my vehicle, a 2017 Acura RDX
by: William01/27/2024
Works like a charm, fits like a glove
by: Parks06/14/2020
Product installed perfectly!
Installation instructions were very clear.
Wished I had ordered the accompanying wiring harness and hitch cover.
by: David S03/23/2017
2014 AcuraRDX
Perfect fit. Tech who installed it complimented you on good design and ease of installation. Bike rack fits perfectly.
by: Milan08/15/2016
2014 AcuraRDX
Appears to be a solid product after a few days of use. I had it installed by a mechanic due to lack of proper tools, but the installation was as easy as described in the documentation. Well built, does the job and looks nice too.
by: Seth B.05/09/2017
2014 AcuraRDX
Products came in a timely manner and the videos associated with each product explained everything. The videos and paperwork made the installation a breeze!
by: Bryan11/29/2021
Easy to install once the RDX factory mount point threads were cleaned up. Very happy with the product.
Bryan
11/30/2022
After a year weve had zero issues with the product or my DIY install! Cant complain, good product
by: Tony12/16/2022
I ordered a hitch from this online outlet after the one a local [online] reserved for me turned up "missing" somehow and I had less than a week to get on the road. When I called to place my order I was helped by an actual human being with a friendly demeanor---and native English-speaking skills (imagine that!). My order arrived just three days later and the [online] folks actually installed it for free. After the original snafu I was able to move from New England to Georgia on schedule because of etrailer---many thanks!
25
382
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Does Curt Trailer Hitch and Wiring Harness Fit 2018 Acura RDXI am happy to confirm you are on the money with the Curt trailer hitch receiver and trailer wiring harness that fit your 2018 Acura RDX: - Curt Trailer Hitch Receiver # C13130 - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56008 Both of these items will fit your 2018 Acura RDX and will allow you to tow your boat as well as use a bike rack. The Curt Towing Starter Kit for 2" Hitches # C45534 may be the ball mount you need, but it depends on if its 3/4"...
view full answer...
- Do I Still Need to Use the Stabilizer Straps on my Curt Hitch When Carrying a Bike RackStabilizer straps are no longer required when using a Curt hitch like the # C13130; this was an older requirement for some Curt hitches when using a bike rack only, but they have since determined that it is not required or recommended any longer. You could also use the Draw- Tite # 75784, which the main difference is that the receiver is about 1-1/2" shorter, so it's not as ideal for bike racks since the clearance from the vehicle will be minimal. I've linked an installation video of the...
view full answer... - Which Curt Trailer Hitch Fits 2017 Acura MDXWe have a very similar Curt hitch that does fit your 2017 Acura MDX with the part # C13146 but the one you referenced is not a fit so it would not be the hitch to go with. I attached an install video for this hitch for you to check out as well.
view full answer... - Recommended Bike Rack For Hauling 4 Bikes On A 2014 Acura RDX Yes, both the etrailer Trailer Hitch Receiver # e24AR and Curt Trailer Hitch Receiver # C13130 would be a fit for your 2014 Acura RDX. Since you're limited on capacity the Hollywood Racks Destination Bike Rack for 4 Bikes # HR4000 would be a great option to haul 4 bikes. This hitch mounted bike rack weighs approximately 47lbs and can handle up to 35lbs per bike. It has straps at each wheel cradle and padded clamps on towers in the middle of the rack to clamp on to the frame of the bikes...
view full answer... - Recommended Trailer Hitch And Wiring For 2016 Acura RDXYes, the Curt # C13130 does fit your 2016 Acura RDX. To tow a traier you also need a ball mount and hitch balls. I've linked our selection of ball mounts as well as an article to help you select the correct rise or drop you need. If you need trailer wiring, you will need part # 118569. I have attached a link to an installation video for this harness. I have attached links to some of the products we offer that may work for you. If you have any questions about a specific item let me...
view full answer... - Does The Curt C13130 Hitch Fit A 2014 Acura RDXYes, the Curt Trailer Hitch # C13130 does fit your 2014 Acura RDX. This hitch is capable of supporting a maximum GTW of 4,000lbs, and a maximum TW of 600lbs. If you're interested in a ball mount kit, I recommend the # C45036. This kit includes a ball mount with 0" of rise, and 2" of drop, along with a 2" ball and a hitch pin and clip. If you want to complete the set-up, you'll also need wiring. Trailer wiring will provide lights to your trailer so you can be in legal compliance and safe...
view full answer... - What Vehicles Does Draw-Tite Hitch 24882 Fit, and What Hitch Fits 2013 Acura RDXI'm sorry to hear about your 2012 Chevy Cruze, but I can definitely let you know what vehicles your Draw-Tite Trailer Hitch Receiver # 24882 fits. This hitch is a fit for the following: - 2011-2015 Chevrolet Cruze - 2012 - 2017 Buick Verano (excluding Turbo models) For your 2013 Acura RDX, when you do get the chance to put on a hitch, I recommend going with the Curt Trailer Hitch Receiver # C13130 as it is a slightly easier installation than the Draw-Tite # 75784 and has a higher tongue...
view full answer... - Trailer Hitch and Wiring for a 2016 Acura RDXWe do have trailer hitches and wiring that will fit your 2016 Acura RDX. For a trailer hitch I recommend a Class III hitch because they are more robust and have a 2 inch receiver that is compatible with more accessories. Curt Class III hitch # C13130 is a popular option for the RDX. I included a link to a video showing an example installation for you. For trailer wiring you can use wiring harness # 118569 to add a 4-Way flat connector to the back of the vehicle. If you plan on doing...
view full answer... - Bolts Won't Thread on Curt Hitch of 2017 Acura RDXI do have suggestions if the bolts won't thread when installing the Curt Trailer Hitch Receiver # C13130 on your 2017 Acura RDX. What you can do is use a thread tap, a size M12 x 1.25 to fit the same size bolts.
view full answer... - Distance From Ground To Inside Top of Receiver on etrailer Trailer Hitch Receiver For 2017 Acura RDXThe distance from the ground to the inside top of the receiver for the etrailer Trailer Hitch Receiver # e24AR is 12-1/2". I have attached an image below showing this measurement on the Curt # C13130. The etrailer hitch is identical with the exception of the matte black powder coat finish. Since it sounds like you plan on towing, you will also want wiring. For the most reliable option I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118569. This plugs into...
view full answer...
- Best Trailer Hitch and Bike Rack for 2018 Acura RDXThe best trailer hitch for your 2018 Acura RDX to carry a bike rack is the Curt # C13130 because it has clean look with a concealed cross tube and the highest tongue weight capacity among the hitches that fit your Acura, which speaks to the strength of the hitch. This Class III, 2" hitch is made in the USA and is a complete bolt-on installation that will not require any type of drilling into your car's frame. I have added a photo showing how the hitch looks when installed on a RDX as well...
view full answer...
- Trailer Hitch And Hitch Bike Rack To Carry Rad Wagon 4 & Road Bike On 2015 Acura RDXLet's start with the trailer hitch for your 2015 Acura RDX. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13130. It has a maximum tongue weight of 600 lbs and a maximum gross trailer weight of 6,000 lbs. We have one hitch bike rack able to carry a bike the weight of your Rad Wagon, the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount, part # HLY84FR. It can carry bikes with wheelbases up to 60" and weigh up to...
view full answer... - Bike Rack Recommendation for a 2013 Acura RDXGood news, this Kuat Transfer V2 # KU74FR will work for your 2013 Acura RDX. The hitch I recommend for you is the Drawtite Class III # 75784. This 2 inch hitch has a 400lb tongue weight, which will work good for your carbon bikes and the Kuat Transfer V2 # KU74FR. I have linked all the hitches for your vehicle for your convenience, there is a higher rated tongue weighted hitch from Curt # C13130. Curt highly recommends that you use a stabilizing strap # 18050 with any none trailer load,...
view full answer... - Recommended 2-Inch Hitch For Bike Rack on 2016 Acura RDXSince your hitch application is use of a hitch-mount 2-inch bike rack on your 2016 Acura RDX I do recommend a hitch that does not require the stabilizing strap like the Curt # C13130 does. The hitch I recommend is the Draw-Tite # 75784. Hitch installation is shown in the linked video and detailed in the linked instructions. I also included a helpful article with tips on hitch installation. The tools required are listed in the instructions. Mostly basic hand tools are needed but you'll...
view full answer... - Trailer Hitch Recommendation for 2017 Acura RDX and Thule T2 Pro Bike RackIf you have the 2 inch version of the Thule T2 Pro # TH83JV then I recommend Draw-Tite trailer hitch # 75784 for your 2017 Acura RDX. The Curt option would require the use of stabilization strap # 18050 when using it with a bike rack per the Curt warranty requirements. Draw-Tite does not have that requirement. If you have the 1-1/4 inch version of the T2 Pro, # TH23JV, then the only option is Curt hitch # C12083 and you would have to use the stabilization strap # 18050.
view full answer... - Replacement Handle Nut and Matching Bolts for Curt Trailer Hitch C13130For a 1/2"-13 handle nut you can use # 1332 which is sold in quantities of 1. I have also included a link to the installation instructions and a video showing an example installation of Curt trailer hitch C13130 for you. The bolts that match the nuts are only available by purchasing the complete replacement hardware kit for the hitch # RHK. On the RHK page enter the hitch number and choose Curt where indicated to receive the proper hardware. This will include all of the hardware including...
view full answer... - Recommended Trailer Hitch with Hidden Crossbar for 2017 Acura RDXThe Curt Trailer Hitch Receiver # C13130 referenced in your question is a great choice. This Class III trailer hitch will indeed have a nice hidden crossbar design once mounted under your vehicle. No vehicle alterations, such as fascia trimming, are required during installation. The receiver tube will rest nicely under the rear fascia and bumper of your Acura RDX. I have attached an image that shows the hitch installed on the 2015 Acura RDX, which will be the same on your 2017 model.
view full answer...
- Will Hollywood Racks Traveler 4-Bike Carrier Clear Bumper Of 2017 Acrua RDX With Recessed Hitch?The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13130 measures 6" from the hitch pin hole to the rear of the 2017 Acura RDX (this can be seen in one of the attached demonstration videos). Since the Hollywood Racks Traveler 4 Bike Carrier # HR8500 measures 9-1/2" from the hitch pin hole, you will have plenty of clearance between your bumper and the bike rack's upright bar. This is a really nice bike rack but keep in mind you may need to use adapter bar # RRRBCA021 to secure...
view full answer... - Boat Trailer Coupler Became Disconnected from Ball on 2014 Acura RDXCheck the trailer coupler to see if it is meant to take a 2-5/16 inch ball. If so then the 2 inch ball you have will not be large enough and this issue could keep happening. If it does take a 2 inch ball then either the coupler was not fully secured or something needs to be adjusted with the coupler. Most couplers will have a nut to tighten or loosen that is accessible on the bottom. On some vehicles there is a specific distance the ball has to be from the rear axle of the tow vehicle....
view full answer... - What is the Stabilizer Strap that Curt Recommends Get Used with Their HitchesA stabilizer strap will attach to the hitch accessory and then attach to the vehicle to provide support for the accessory to help prevent some of the shock from bumps from being transferred to the hitch. The Curt Strap part # 18050 is one that is most often used. I attached a demo video that shows how to use this product for you to check out.
view full answer... - Compatibility of 1/2 Inch Bolts with Handle Nuts Used to Install Curt # C13130 on 2013 Acura RDXI spoke with my contact at Curt Manufacturing, who confirms that the 12M bolt are indeed intended to fit the weldnuts, and the 1/2 inch bolts are a fit for the handle nuts. My contact suggested that you closely examine the threads on the inside of the handle nuts to make sure they're not damaged, same with the bolts. Try threading the bolts into the handle nuts before you put the handle nuts up into the frame to confirm fit, try both nuts with both bolts. When the handle nuts are up inside...
view full answer... - Trailer Hitch that Fits 2019 Acura RDXThe Curt hitch part # C13130 does not fit the 2019 Acura RDX. For a hitch we do know is a fit for the 2019 RDX we have the Draw Tite part # 76268 which is also a Class III hitch with a 2 inch opening. There was some confusion at one point and the Curt was thought to be a fit for the 2019 model but now we know it does not fit.
view full answer... - Curt Class lll Trailer Hitch and SportRack 3 Bike carrier for 2013 Acura RDXThe Curt Trailer Hitch Receiver, part # C13130, is a fit for your Acura RDX. The hitch has a 2 inch by 2 inch receiver opening and has a tongue capacity of 600 lbs. Please note that this hitch has a gross trailer weight maximum of 4000 lbs and and a tongue weight capacity of 600 lbs. This hitch is not designed to be used with a weight distribution system. The SportRack 3 Bike Carrier, part # SR2403 measures 12-1/4 inches from the center of the hitch pin hole to the back of the upright...
view full answer... - Replacement Hardware for Curt Trailer Hitch ReceiverThe replacement hardware you're looking for is # RHK. When ordering you'll need to specify that you have the Curt Hitch Receiver # C13130.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Toni
3/26/2019
A year later and I have no update other than to say all is well and works just as great as the day I installed it! Only smiles here...no regrets on this purchase!