Does Curt Trailer Hitch and Wiring Harness Fit 2018 Acura RDX
Question:
I am looking to possibly purchase the Curt items for a 2018 Acura RDX: Item #: C13130 - 2inch Hitch Receiver Item #: 56008 - Wiring Harness Item #: C45534 - 2inch Hitch - 2inch Ball This would hitch will be used for a boat trailer with a maximum GTW of 3500 lbs. and Max. 500 lb Tongue weight. The hitch will also be used for a bike rack in future. I am inquiring that I have the correct match with all 3 items.
asked by: Cedric D
Helpful Expert Reply:
I am happy to confirm you are on the money with the Curt trailer hitch receiver and trailer wiring harness that fit your 2018 Acura RDX:
- Curt Trailer Hitch Receiver # C13130
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56008
Both of these items will fit your 2018 Acura RDX and will allow you to tow your boat as well as use a bike rack.
The Curt Towing Starter Kit for 2" Hitches # C45534 may be the ball mount you need, but it depends on if its 3/4" rise or 2" drop is right for your trailer coupler and hitch height. It may be, but you will want to measure the height from the ground to the bottom of your trailer's coupler to make sure. Since we know the Curt Trailer Hitch Receiver # C13130 is approximately 12-1/2" to the top of your receiver, if the bottom of your coupler measured 10-1/2", the Curt Towing Starter Kit for 2" Hitches # C45534 would work for you.
I've attached a link to a help article on how to measure rise and drop which I recommend checking out. I have also added links to video installations for you to take a look at of both the Curt Wiring Harness # 56008 and Curt Trailer Hitch Receiver # C13130.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Bike Rack For Hauling 4 Bikes On A 2014 Acura RDX
- Q&A: Recommended 2" Hitch for a 2015 Acura RDX and Installation Process
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Why Disconnect Battery to Flat Tow Vehicle Behind Motorhome
- Q&A: Is Battery Disconnect Needed When Flat Towing 2018 Ford Explorer II
- Q&A: Flat Towing 2018 Ford Explorer Behind Motorhome
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Recommendation for a 2016 Acura RDX
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Performance Chips and Modules
- Article: What Do I Need To Tow A Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit