Compatibility of 1/2 Inch Bolts with Handle Nuts Used to Install Curt # C13130 on 2013 Acura RDX
Question:
Install question Acura RDX 2013 Received Curt 13130 2inch hitch, contains 2 different size bolts Directions indicate that the shorter bolts M12 1-1/4 , coarser threaded bolts go into the factory weld nuts, Is that correct ? I ask because the longer ones finer thread 1-1/2inch dont seem to thread into the provided handle nut but the coarser shorter ones do . thanks
asked by: Mike
Helpful Expert Reply:
I spoke with my contact at Curt Manufacturing, who confirms that the 12M bolt are indeed intended to fit the weldnuts, and the 1/2 inch bolts are a fit for the handle nuts. My contact suggested that you closely examine the threads on the inside of the handle nuts to make sure they're not damaged, same with the bolts. Try threading the bolts into the handle nuts before you put the handle nuts up into the frame to confirm fit, try both nuts with both bolts. When the handle nuts are up inside the frame, make sure the bottom (flat part) of the handle nut is sitting flat against the inside bottom of the frame. It it's not sitting flat and square, it would explain the difficulties you've been having. If you find that the hardware is damaged, please let me know and I'll have Curt send you replacements.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Trailer Wiring
- Shop: etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1
- Video: Curt Trailer Hitch Installation - 2017 Acura RDX C12083
- Search Results: cleaning brush
- Search Results: brush
- Shop: Convert-A-Ball Interchangeable Hitch Ball - 2" Diameter - Stainless Steel
- Shop: Nylon Tube Brush - 3/8"
- Q&A: Bolts Won't Thread on Curt Hitch of 2017 Acura RDX
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Brake Controller
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Q&A: Trailer Hitch for 2016 Acura RDX for Use with Thule T2 Platform Rack and Pedego Bikes
- Video: Trailer Hitch Installation - 2015 Acura RDX - Curt
- Video: Trailer Hitch Installation - 2013 Acura RDX - Curt
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Search Results: 68149
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights