How To Make Fender Backs For Triple Axle Fenders # HP37VR
Question:
Do you sell a backing plate for the triple axle fenders?
asked by: Mechelle
Expert Reply:
I have another option for you, but at this time (7/20/2021) we do not offer fender backs for Triple Axle Fenders like the # HP37VR you were looking at.
What you will need to do instead is get a piece of sheet metal preferably 16 gauge, that is 97" x 15-1/2" and lay it underneath the fender. Then trace it out using a marker and cut the back out using a cutoff wheel making sure to wear safety glasses and gloves.
Once it is cut out you can attach it to your fenders by drilling through both and using nuts and bolts, or rivets if you have a rivet gun.
If this is not something you are comfortable doing, a local fabrication shop can knock them out for you.
I included a video of the # HP37VR for you to take a look at.
Product Page this Question was Asked From
Tri-Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Trailer Fenders
- No Step
- 14 Inch Wheels
- 15 Inch Wheels
- 9 Inch Wide
- 97 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tri-Axle Trailers
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Tri-Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Search Results: 2 5/16 hitch
- Search Results: 2 5/16
- Search Results: 2 5/16 coupler
- Q&A: Recommended Fender for Triple Axle Trailer
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: electric drum brakes
- Search Results: 7 pin connector
- Article: Where to Position the Trailer Axle?
- Search Results: triple axle fenders
- Search Results: dw05745~10
- Video: Review of etrailer Trailer Fenders - Triple Axle Steel Fenders - HP37VR
- Q&A: Fenders For Three Axle Trailers
- Q&A: Equalizer Dimensions and Shackle Strap Thickness for Tandem-Axle Trailer Hanger Kit
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Most Popular Wheel Bearings
- Q&A: Are There Replacement Brake Pads for the Tie Down Engineering (TDE) 46304 Disc Brake Calipers
- Q&A: Are There Replacement Master Cylinders Available for Brake Actuators
- Q&A: Weight And Dimensions Of The Viair EVC Battery Powered Tire Inflator VA88JR
- Q&A: Triple Axle Boat Trailer Suspension Clearance Problems After Installing New Front Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Fifth Wheel Installation Kit 30095 using adapter kit 58425
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
on Trailer Fenders
