9" Wide x 71-1/2" long x 20-1/2" tall. Get 1 extra-sturdy fender for your tandem-axle trailer with this bolt-together fender kit. 16-Gauge steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Note: Do not use the connecting plate to mount this fender to your trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this etrailer, tandem-axle bolt together steel trailer fender for 14 inch to 15 inch wheels for a quantity of one fender.Now this rounded fender will help cover two tires on one side of your tandem-axle trailer. This fender will act as a splash guard to help keep road debris from hitting other vehicles and helps protect your trailers cargo. Now, I did want to zoom in just to describe this to you. This is a bolt together design.
So if you notice it has the, you can see the bolts right there. And if I flip it this way, you'll be able to see the connecting plate all assembled.It is a, comes as two half fenders, the connecting plate and the hardware. And the reason they do a bolt together design, it is designed to help you save shipping costs because of the smaller unassembled size when compared to a single piece fender. And also when you bolt this together, you'll gain extra strength of the fender because of the way it's assembled with the connecting plate underneath, the grade five hardware holding the pieces together.Now the inner and outer edges, if you look on both sides, they do have one inch curved radius slips on them. Gives you a nice extra protection and top quality appearance.
It is made of a sturdy 16 gauge cold rolled steel construction. Now it does have a raw finish. So you might find some small surface rust on this. All you have to do is sand them lightly and it'll remove them. And then just need to prime this and then paint it to provide even more resistance for corrosion, and also to match your trailers paint finish.Now this is a weld-on or bolt-on installation.
There is not pre-drilled and the mounting brackets for bolt on installation, we do sell separately for this. This fender is made in the USA. Application again is for tandem-axle trailers with 14 inch to 15 inch diameter wheels. It is for quantity of one fender. Weight on it is about 13 pounds each.And the last thing I want to give you is the dimension.
So when this is all assembled, like it is right now, the length from this end, all the way over to that end 71 and a half inches long. Width is nine inches wide. And the height from the bottom to the very top is 20 and a half inches tall, but that should do it for the review on the etrailer tandem-axle bolt together, steel trailer fender for 14 inch to 15 inch wheels for a quantity of one..
Average Customer Rating: 4.6 out of 5 stars (873 Customer Reviews)
9" Wide x 71-1/2" long x 20-1/2" tall. Get 1 extra-sturdy fender for your tandem-axle trailer with this bolt-together fender kit. 16-Gauge steel is durable. Bolt or weld onto your trailer.Great fenders. Very stiff and easy to install. I ended up welding the two halves together, with the backer plate. It took a little trial and error to get them properly aligned to the inside splash guard already on my trailer. With some clamps and careful measurements it went quite well though.
great fit very easy to install and they look great...im very satisfied
I gave an excellent rating because the fender is excellent and very sturdy. The very long delivery time did put me in a bind but that was no fault of yours.
they worked great
Fit together perfectly
Had to replace boat trailer fenders and ordered from etrailer. Shipment was amazing and quick. The fenders were a little longer than we needed, but my husband made them fit. The outcome is great!
These fenders were a replacement on a Skeeter boat trailer. These fenders are a much better quality than the original fenders and I am very happy with them. Highly recommended.
Husband modified his boat trailer from a single axle to tandem and then needed new fenders of course and these were perfect. Very pleased with them and etrailer.com was great to work with from initial purchase to delivery. Thanks!!
Your fenders arrived yesterday. They look fine. It would have been nice if the person I dealt with on the phone had mentioned the panels that close off the back of the fender. I noticed the panels on your web site while checking to see the status of the fenders that were supposed to be delivered on March 30 but didn't arrive until the 31st. Not a problem, since I now have to wait for the second order of the backing panels. Not totally the salesperson's fault as I should have noticed the lack of backing on the website photo. Always been good dealing with you folks so no problem.
I absolutely hate to leave this store a bad review because I've had nothing but good experiences with them in the past. However I'm extremely disappointed. I Purchased these replacement fenders through etrailer after shopping around and even though they were cheaper elsewhere I opted to do my business with etrailer and pay a little more knowing how impressed I've been in the past with the level of pride they take in shipping items, I've gotten boxes inside of boxes in the past. Unfortunately this time I recieved $xxx worth of dented up fenders for my trailer. They were only wrapped in stretch wrap, not even bubble wrap much less a box. Very disappointed in etrailer after this purchase. You guys can do better, I've seen you do better, with the rims and tires I bought there for this same trailer.
They do not work for 15 inch wheels . My trailer had no fenders so I had nothing to compare them to. I bought some 14 ga. Material and made them 4 inches longer. I radiused the sides with a snap on impact deep socket. Mig welded them up and will sand down tomorrow . They fit great now. Thank you.
Metal was thick enough to weld safely to the trailer frame and thicker angle iron. I did a crappy spray can paint job(just brake cleaned them before painting) and they are still looking great a year later.
They sent me two of the same side fenders I believe two left fenders, I would have returned them and gotten a the correct one sent but I didn't realize until to late. We had gotten someone to come out and weld them on and he is the one who figured out they sent two of the same sides. Because he drove two hours to come weld them on for us and we needed them put on asap, we had to just weld them on anyways. Although they aren't even our welder did a great job at making them look the best he could. Wish the correct ones were sent so that they would have been perfect but it's just a bit of a bummer. The fenders them self are great looking good quality and sturdy it was just who ever packed it unfortunately made an error. I purchased a lot more things from this buisness and all are great other then this error
The fenders are good quality although had to modify them to fit my trailer. My issue is how they were shipped. no protection aside from a plastic film on them and shipped both fenders in one box so they came with some scratches which was pretty disappointing. I reached out to ETRAILER but no one ever responded. if they'd take a moment to pack them to protect them during shipment I'd have given 5 stars. Although exact same size as my original fenders, I had to use ratchet straps and a floor jack to get them in position and drill new mounting holes. In the end, aside from some scratches during shipping they look great and have had no issues. I'd probably buy them again but would call and ask if they'd protect them instead of just throwing them in a box.
My trailer had a few tire blowouts that destroyed the plastic fenders. After ordering steel fenders and brackets from etrailer, my trailer looks brand new! The delivery and products are flawless!
Fenders were as advertised at a good price point. They replaced ones that had been on the trailer for 20 years. I'm certain these will last just as long.
Fenders look good had to trim a little off both ends of backing plates. Yes I will buy from them again.
Very good quality. I would recommend to anyone looking for trailer parts. Great service at a reasonable price.
Good quality . arrived undamaged.i welded
Metal condiut at a angle in the middle and all under the outer edge so it would be extra strong in case i have to stand on it.
Useed on Car trailer
Fenders started to have surface rust all over them even though they are supposed to be stainless steel after only 3-weeks. I do not recommend these for salt water application.
Great quality. Good fit. Been installed for a year and stainless is holding up great
The fenders were a great replacement for the old fiberglass fenders.....they fit perfect....great upgrade and best price that included shipping.....thanks
The fenders worked great I put them on a 2007 Champion boat trailer they fit pretty good. That being said the way that they are prepped for shipping is not good..they are staked together with nothing between the two fenders so the bottom one gets scratched up. There is very little protection for the fenders during shipping so the top one was scratched up also.I put them on anyways it was not worth the trouble of trying to send them back.
Original destroyed by a tire failure. Arrived quickly and well packed (wrapped). However I did not realize they were bare metal. No problem for a rattle can. How to video was very helpful. Complete install, minus paint, took about four hours. A second set of hands would be very helpful!
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.