3/4" Diameter Hinge Pin Nipple, 2" Long
(19 reviews)
Price: $5.63
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (19)
- Q & A (0)
- Videos (1)
- Photos
Redline Trailer Door Hinges - HPN342
- Hinge Pin Nipple
- Build Your Own Hinge
- 2 Inch Long
- 3/4 Inch Diameter
- Weld-On
- Redline
Hinge pin nipples are aligned and welded to either the outer frame or the gate/door so that the hinge pin can be inserted to create a custom, heavy-duty hinge.
Features:
- Build your own hinge
- Great for trailers and agricultural applications
Specs:
- Inner diameter 3/4"
- 2" long
HPN342, Hinge Pin Nipple 3/4" ID 2" Long
Video of 3/4" Diameter Hinge Pin Nipple, 2" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Enclosed Trailer Parts - Doors - HPN342 Review
Customer Reviews
3/4" Diameter Hinge Pin Nipple, 2" Long - HPN342
Average Customer Rating: 4.9 out of 5 stars (19 Customer Reviews)
Hinge pin nipples are aligned and welded to either the outer frame or the gate/door so that the hinge pin can be inserted to create a custom, heavy-duty hinge.by: Michael07/07/2020
The trailer door hinge lock works great. The only complaint I had was the ends don't fit the pipe very snug so i drilled and tapped some holes and added set screws.
by: Ryan Vallieu11/06/2013
No problems using this with the matching pin to fix/replace a Haulmark Cub ramp door hinge that the factory only tack welded on at the ends (which ripped off).
by: Brian 02/10/2017
Small parts but totally needed. Appreciate you putting together matching pieces so everything worked as needed.
I Always use e-trailer for anything I need and will
Continue to do so in the future. Small or large, your service is always equally fantastic.
by: Jay06/14/2016
Worked great. Wanted to make an additional gate for my trailer and this item worked perfect with the existing hinge that was all ready on my trailer.
by: Coop06/04/2016
Second time I have bought from these guys, and they are my go to supplier for these kind of parts. Easy to navigate the site, easy check out, and received in less than a week with just the standard option! Haven't had a chance to do the work yet, but product quality seems solid and well made. Highly recommend!
by: Tray Harrison08/02/2015
A big improvement over the homemade hinges that the manufacturer of my trailer used. These should last much longer.
by: Frank Pester09/08/2016
Very pleased with etrailer, my first choice. Thanks!
by: joshua barnhill06/22/2015
Product is exactly what i wanted and got to me in an ok time fram. Would have gotten to me sooner if ups brought it to me but instead transferred it to the post office which added an extra day.
by: Bens05/15/2018
Great product gets the job done!
by: A Plus Tree02/14/2017
Great hinge. Just wish they made bigger and longer ones too.
by: Cris08/17/2019
Great product!
by: Joe gross12/04/2015
Very pleased with this product fits like a glove thank you for your parts sincerely Joe gross
by: Terry 10105/27/2017
The video about this product took all doubt away about the dimentions. Just what I needed.
by: Mike06/15/2018
Just what I needed. Speedy delivery
by: Stacy L07/05/2016
Great product for the price
by: jflynn07/17/2015
good price
by: Cory04/14/2017
Good quality.
by: Crob06/24/2017
was as advertised.
by: Javad01/07/2022
19
19
See what our Experts say about this Redline Trailer Door Hinges
- Can the Polar Door Hinge PLR1902 be Separated?The ends of the Polar Ramp Door Hinge # PLR1902 are actually welded on, so they cannot be separated. However, we do have a few other options available for you. The Polar Dump Door Hinge # PLR1904-Z does use a bolt to hold everything together. There is still a zerk fitting to allow everything to be lubricated. It is quite a bit different, however, so the next option may be a better option. The Redline 3/4" Greasable Hinge # HP344G can be paired with # HPN342. This could then be adapted...
view full answer... - Hinge Pin Socket to Use with part # HP344GYes the part # HP344G is only one part of the hinge. You would need the part # HPN342 for a 2 inch long socket or part # HPN34214 for 2-1/4 inch long.
view full answer... - 6 inch Long Trailer Hinge that is 3/4 inches in DiameterFor a 6 inch long hinge setup that has a 3/4 inch diameter you would want the part # HP34G and # HPN3342. These two pieces together will give you a hinge in the dimensions you requested.
view full answer... - Are The Hinge Pin Nipples Available In Aluminum?I am sorry but we do not offer the 3/4" Diameter Hinge Pin Nipple in aluminum. Right now, all we have is the # HPN34214 which is made of steel.
view full answer...
Do you have a question about this Trailer Door Hinge?
Info for this part was:
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.