1/2" Diameter Greasable Hinge Pin, 4-3/4" Long with 3/4" Base

This low profile but strong hinge really sets off the crisp oak tailgate for the home rebuilt utility trailer. Coupled with some 2 in angle screwed into 5/4 rough oak, allows right offset to lower hinge body below deck line for welding onto rear box tube. Gate pulls off and leaves nothing protruding for sliding in cargo.

Also, then it leaves a great positive secure engagement point for motorcycle ramp attachment. Sweet product!167406

Click to Enlarge

George: Sorry it has taken this long to get a review back to you but just finished my project. Converted my 5 x 8 tilt trailer to one with a rear Gate by using your hinges. Worked perfectly.350916

Click to Enlarge

by: Jimmy 12/09/2023

Nice fitting hinge 1700194

by: Gary S.08/26/2017

Installed a yr ago. Perfect product.
One thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability. 426127

by: Hailey06/09/2023

The hinges work like they should. Customer service is top-tier. If you have a problem, they will fix it ASAP.1597495

by: Jimmy N12/10/2019

Hey there! Other than accidentally welding in the wrong spot one time, these are absolutely the greatest hinges I've ever found, and at a great price. Currently assembling my 5th motorcycle trailer in the last two years, and would recommend these 3 at a time, for strength of ramps for large american bikes, that occasionally weigh as much as 1100 lbs... and have yet to break a hinge, though I did break a weld once (obviously my fault for a junky weld that time).... Great product, great service, quick responses. Thanks for being a great company. Will be ordering again!!!!730472

I've been using etrailer for the past 10 years and have never been disappointed. I'm using this product to make a VW bus side car for my scooter and it is exactly what I'm looking for. In the past I've used many different towing hitches and every one has been top notch and the cost, shipping and product quality has been great. I'd like to give a shout out to the customer service department but to be honest, I've never had to use them. Cheers!720116

Just what I had been looking for now gate want squeak since it grease able and fast shipping 452539

Shane

11/16/2018

Still holding strong

We had a little mishap in the order and it was taken care of ASAP. Ended up sending ones that was damaged in the order. Very happy with this company. Now my horse trailer can get fixed. I will be ordering from these guys again. Thanks etrailer for all the hinges 279126

by: Mark M09/25/2016

Worked like a charm! Welded this in to replace a seized-up hinge pin. Perfect fit AND a grease fitting to ensure long service and smooth operation. Etrailer shipping is super fast. Very pleased. 299618

Just what I wanted. When ever I’m looking for a trailer part etrailer.com has what I need. Keep up the good work and Thank You.500254

Mary A.

4/24/2019

Great

e trailer had exactly what i need and they made it easy to order and followed up on the sale and as a ex Customer Service Manager I had a positive experience with every step of the process. e trailer is saved in my Favorites and will be the first click next time. 259444

The quality is good and they work just as good.689894

Click to Enlarge

Received product 4 days after placing order. Using product to replace a hinge on a trailer gate that was damaged. 121186

Steve

3/18/2015

no issues with the hinge after having it a year

Product is just as pictured, nice quality, and should work well. I bought three of these to use on a trailer ramp/tailgate. It was cheaper for me to buy these, than spend the time turning them up on the lathe, plus the cost of materials. 235975

I think these will do what I want! My trailer came with a non removable drop gate. At times I would like to take drop gate off so I can get a wheel barrel close to shovel mulch into it. I believe I should be able to weld these on the cut original hinges off allowing that to happen! 638486

I welded each half to a piece of angle iron and bolted one half to the trailer frame and the other half to the ramp. Worked great and the because they are greaseable I think they will work for many years.148237

by: Antonio04/01/2021

I have had this on my trailer for a year now, works perfectly and I have had no issues.
I would recommend this if you need a replacement.999603

etrailer is an excellent vendor, repsonsive to the order and delivery of the products. Everything I have received has been exactly what I expected from the web site. Good Company, try it for whatever you need.313303

Great trailer door replacement hindge I ordered 3 thinking they would not hold the weight of my ramp door on my sled trailer after welding two in place i think the third was overkill. Easy to use worked like silk great thing with the zerk fitting for grease every season.9816

Great quality product and perfect to upgrade my trailer gate. Website is really easy to use and quick shipping. I keep coming back.275990

Very satisfied with the weld on hinges I received; these are being used for drop leafs on a welding table. The additional 48 x 16 inch leafs are dead level, flat and square to the rest of the table surface. Definitely will use these again for future projects.
291302

Quality product. It's machined very well and has nice fitment on the grease fittings. Shipping was quick and with tracking. This is my third order with etrailer, and all have been great. 356870

Quick shipping item exactly what we ordered at a good price. We will use etrailer again in the future and recommend them for your trailer parts needs. Oh and they kept us informed by email of where the part was in the mailing process to billing to delivery. Thanks again etrailer. 649879

by: Eric C.05/16/2019

This part has worked exactly as designed. I like that is has the grease fitting as well.642556