Weld-On Hinge with Brass Bushing - Steel - 10-1/4" Long - 3/4" Pin Diameter

Video Transcript for Review of Marlboro Trailer Door Hinges - 10-1/4" Weld-On Steel Hinge - MA59ZR

Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Weld-On Hinge. This is a nice heavy-duty steel hinge that's going to provide support along the length of your metal door or gate. This will also work for your trailers, barbecue pits, electrical boxes, machinery doors, and lots of other applications. It is a weld-on installation, so it is going to be restricted to your metal surfaces, but having that weld-on installation is going to ensure a nice strong hold for heavy duty permanent applications.

The overall length of this hinge is right at 10 and one quarter of an inch long. Our thickness is going to depend on where we measure it 'cause, as you can see, we do have this triangular portion there that's going to provide those flat sides for us to weld this in place. So if we measure with that, we're going to have a width of about one and a half inches. If we rotate that around so that not measuring that, it's going to be just over an inch. We'll call it an inch and one eighth in diameter.

This is a steel construction, so it's gonna be very durable for you. Our pin here is a three quarter inch, or 19 millimeter diameter, and then we also are gonna have this corrosion resistant brass bushing that's going to make sure that we have a nice smooth hinging action there. So if you are needing a 10 and one quarter inch long heavy duty steel hinge, this is gonna be a great option for you to get welded on in place. That's gonna complete our look for today. Again, I'm Michael with each trailer.com.

Thanks for watching..