3" Wide Continuous Hinge - 7' Long - Steel

Video Transcript for Review of Polar Hardware Trailer Door Hinges - 7 Foot Long 3 Inch Wide Steel Hinge - PLR843

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at the 7-foot-wide by 3-inch-wide continuous steel hinge. This is a piano hinge that's gonna provide a sturdy, consistent support for your door or tailgate on your utility trailer. The continuous design is gonna offer more support than your smaller individual hinges and it's gonna help reduce the stress on your heavier doors. Now, this is 7 feet wide by, or 7 feet long by 3 inches wide, you can see if I get this to stand up properly, it's about 3 inches wide. It is going to have the two sides that will each fold in, does have 270 degrees of rotation for your full opening and closing, so it'll give you plenty of adjustability there so that you can open your door properly.

Each side of the hinge is about 1 1/2 inches in width there, so combined for that 3 inches. This is a 16-gauge steel construction, so it is gonna be very durable and long lasting. You can either weld this on or bolt it on. It is a solid metal, so there's no pre-drilled holes. So you can drill out your own holes to match your setup.

Our individual knuckle links here, we're looking at right at 2 inches and our pin diameter is 3/8 of an inch. This is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the U.S. So if you are needing a 7-foot-long by 3-inch-wide continuous hinge, this is gonna be a great option for you. That completes our look for today. Again, I'm Michael with etrailer.com.

Thanks for watching..