Replacement Head Adjustment Hardware for Curt Round Bar Weight Distribution Systems

Video Transcript for Review of Curt - Weight Distribution - C17114

Today we're going to take a look at the replacement head adjustment hardware for the Curt round bar weight distribution systems. Now this hardware will replace the head adjustment hardware that came standard on your Curt weight distribution system with the round bars. This will allow you to adjust the spacing between the shank and the hitch head to ensure proper tilt for your setup.This does resist corrosion, it has a nice zinc finish to it. It is a steel rivet and includes the one 1/2" diameter steel rivet and seven of the 1/2" flat washers.A few measurements on the rivet itself. Overall length, it's going to be right at 1-1/2". The pin length, it's right at 1-1/4".

The head diameter's going to be right at 1-1/8". And the diameter on the pin itself is right at 1/2".On the washers, overall diameter on the washer, it's going to be right at 1-3/8". And the inner diameter is right at 1/2".But that should do it for the review on the replacement head adjustment hardware it for the Curt round bar weight distribution systems.