Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount a door to the corner of your trailer with this square corner hinge with an extra-long 16" strap. Reversible bracket can be used on left- or right-hand doors. Non-removable pin ensures maximum security to keep your cargo safe.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the square corner hinge with reverse bracket for trailers. This is going to allow for 270 degree door swing. It's made from a very sturdy steel construction. It's going to have a zinc plating on it so it's very strong and durable. It's going to be rust and corrosion resistant. You'll want to mount this on the corner of the trailer to allow for full door swing. It's going to feature a non-removable pin for maximum security right here in the hing. If we take a measurement of the strap width, going this direction edge to edge we're looking at a measurement of around two inches.
If we take a measurement of the strap length, what I'm doing to get this measurement is I'm measuring from the back of the flat side here of the hinge to the end of the strap. You can see that's where we're going to get our 16 inch mark. It's also very close to the center of that non-removable pin out to the end of the strap around 16 inches. Overall length, if I go to the back of the hinge to the end of the strap, we're looking at a measurement a little bit closer to 16 and 1/2, 16 and 5/8, right in that area. Right here on the hinge there's going to be 2 mount holes. These mount holes are going to be separated apart from one another on center, looks to be 3 and 1/4 inches.
The hinge edge to edge that's going to give us a measurement of 4 and 1/2 inches. If we measure this direction, we're looking at a measurement of, from this point here to the back we're looking at about 2 and 1/8 of an inch. The holes on the hinge, those are going to have a diameter of 3/8 of an inch. Then you can see how that allows the unit to swing, so it's got a rotating design. If we take a measurement of the holes here on the strap, these are actually going to be separated on center, so there a hole right here, so center of that hole to center of this hole is 5 and 5/8.
Center of this hole to center to center of this hole is also 5 and 5.8. Then those are going to have a diameter of 5.16 of an inch. That's going to do it for today's look at the square corner hinge with a reverse bracket.
Average Customer Rating: 4.8 out of 5 stars (48 Customer Reviews)
Mount a door to the corner of your trailer with this square corner hinge with an extra-long 16" strap. Reversible bracket can be used on left- or right-hand doors. Non-removable pin ensures maximum security to keep your cargo safe.I am converting a 5 x 8 cargo trailer into a tear drop type camper. The trailer came with a ramp, which is not practical my use. I wanted to convert the ramp to a side swing door. I ordered the 16" hinge to provide as much support as possible. I built a new frame, re-used the outer skin & trim and installed the door using the hinges. To say I'm happy with the result and how the hinges work is an understatement! The project came out better than I had hoped and the hinges were the perfect choice.
Product was ordered @ 2:30pm on a Thursday and delivered before noon the next day at no additional cost. I am extremely happy with the price and level of service that I received from etrailer.com.
Strong built really heavy duty. Love it1
Your hinges were modified for a trailer with a wide door. The hinges have held up great. Short clip shows the door on the trailer.
These hinges i received are super strong and sturdy and are Being used for 6×9 barn doors
Great products and very fast service
Terrific service. Product was exactly what I needed.
RECIEVED AS ORDERED, Looks Good! I have not put them to use yet as i have not completed the project
etrailer rocks! Always fast shipping, and these hinges are exactly as described. They'll work fine as replacements.
I have had these on my trailer for about a year now and it is holding up great!
Fast service. Good product
Well-made product
promptly delivered
no problems
Exactly what we needed, great service every time.
I got my 2 hinges within the time frame promised.
Worked well and good price
awesome service!! Awesome products!!! 5 stars are not enough. Ordered and it was here before expected, packed well and exactly as advertised.
I got what I ordered It came in 3 days like everything I order from them great company and I will be ordered from them again
The order has arrived, thank you.
Parts arrived a day sooner than expected.
And the y were exactly what I wanted.
Fast!
Product all I expected. Customer response far exceeded expectations.
Product arrived in good condition.
Do you have a question about this Trailer Door Hinge?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
2/16/2021
They have been working great. I mounted a 5000 btu window air conditioner in the door and there has been no sagging because the hinges support 13 the width of the door.