Correct Replacement for Quality 3500 Lb 95 HF 80 SC Trailer Axle

Question

Question:

I have a Quality Trailer Product TS35950800550WAX 3500 axle weight rating and am needing a replacement axle. Do you have a recommendation?

asked by: Mike H

0

Expert Reply:

The correct replacement axle for a Quality 3500 Lb 95 HF 80 SC is the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. This option will be a direct replacement with no modifications needed. If you want to replace the brakes and hubs/drums as well then we do offer a complete kit as part # 7359765-EB.

expert reply by: Conner L

0

Quality 3.5K Trailer Axle Replacement
(click to enlarge)

Answer 1

The Dexter "8-256" is a hub assembly that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in a few different bolt patterns therefore you would need to confirm your bolt pattern using the attached help…

view full answer...

Answer 2

Your Dexter Axle hub 8-256 should use an #L68149 inner bearing and an #L44649 outer bearing which means you have a #84 spindle and you'll use one of the following hubs: 5 on 4-1/2" - part #84545BX 5 on 4-3/4" - part #845475UC1 5 on…

view full answer...

Answer 3

We have many styles and sizes of trailer wheel lug nuts shown on the linked page. These are offered in either 60-degree or 90-degree coned profile, in zinc, chrome or stainless and for four different wheel stud diameters. Just click on the feature to…

view full answer...

Answer 4

Yes, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles #7359765 as a replacement for what you have. This actually comes with it's own lock washer and nut too so you wouldn't have to try and reuse what you have or source a new…

view full answer...

Answer 5

Yes, the Dexter axle part #7359765 that you referenced uses the same 84 spindle that you have measures. This will allow you to reuse your current hubs and bearings.

view full answer...

Answer 6

To weld on a brake mounting flange such as #4-44-1 it requires a special jig and someone with experience in welding on brake mounting flanges. They have to be perfectly square and concentric and if off just a little bit it can lead to all kinds of…

view full answer...

Answer 7

It's definetely possible to custom order an axle without hubs. Most trailer shops who can order Dexter axles wouldn't have a problem with this. I am actually a little surprised that where you went didn't offer you this. We actually have…

view full answer...

Answer 8

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 9

Since you have a 2-3/8 inch diameter axle and that indicates you have a 3,500 lb axle the 84 spindle like the part #TRU24FR will work great as that is what capacity this axle was designed for. Installing spindles is a precision job that should only…

view full answer...

Answer 10

I contacted our representative at TruRyde about the EZ Lube Spindle, part #TRU74FR, and he confirmed that it will work for 10 Inch brakes. I would recommend having a trailer professional install part #TRU74FR, as it requires precision welding. The…

view full answer...

Answer 11

In order to determine which replacement axles you need, I will need a few measurements. I will need hub face to hub face measurement, spring center to center dimension, inner and outer wheel bearing reference number, and the axle capacity. Take a…

view full answer...

Answer 12

TruRyde EZ Lube Spindle #TRU74FR does include a brake mounting flange already welded in place. The linked page displays all of our spindle products which include square-stub spindles without brake flanges like #TRU47FR. We do have 1-3/4-inch spindles…

view full answer...

Correct Replacement for Quality 3500 Lb 95 HF 80 SC Trailer Axle

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching