TireMinder Smart TPMS for RVs and Trailers w Signal Booster - Bluetooth - 4 Flow Through Sensors

TireMinder TPMS Sensor - TM26FR

TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to send updates to your smartphone. Flow through design lets you inflate tires without removing sensors from valve stems. Repeater boosts signal between sensors and app.

Features:

• TPMS lets you monitor your RV's tire pressure and temperature with an app on your smartphone
  • Works with your motorhome, 5th wheel, motor coach, or trailer
  • Compatible with iPhone 7 and Android 4.4 or newer smartphones and iPad 7 devices or newer
  • Connect with Apple CarPlay to conveniently display tire pressure and temperature right on your car's dashboard
• 4 Flow through sensors let you monitor each tire individually
  • Allow tires to be inflated or deflated without removing sensors
  • Send the information from sensor to your smartphone via Bluetooth
  • Check the tire pressure and temperature every 6 seconds
  • Can be used on rubber, steel, chrome, or nickel valve stems
• Free TireMinder TPMS app provides you with visual and audible alerts
  • Warns you of changes with tire pressure, tire temperature, sensor and monitor batteries, and sensor signal
  • Enables you to set tire pressure and temperature settings
  • Lets you monitor up to 22 sensors - additional sensors sold separately (TM66FR)
• Bluetooth adapter shows alerts from sensors even if your phone is off
• Repeater extends the signal between the sensors and your phone
• Zippered bag is included so you can store the system when not in use
• Simple installation
  • Sensors are secured onto the tire's valve stems
  • Repeater installs onto the exterior of your RV or trailer
  • Batteries, locking nuts, O-rings, a wrench, and an adhesive are included

Specs:

• Tire sensors:
  • Pressure range: 0 psi - 199 psi
  • Operating temperature range: -4 degrees F to 185 degrees F (-20 degrees C to 85 degrees C)
  • Battery voltage: 3V DC
  • Battery life: 9 to 14 months
  • Accuracy: ±3 percent
• Monitor:
  • Overall dimensions (not including antenna): 4" wide x 3/4" deep x 5-3/4" tall
  • Screen dimensions: 5" diagonally
  • Working voltage: 3V DC
  • Battery recharge time: 6 hours
• Repeater:
  • Overall dimensions (not including antenna): 2-1/2" wide x 3/4" deep x 4-1/4" tall
  • Wire length: 6' 7-1/4"
  • Wire configuration:
    • Black: ground
    • Red: power
  • Input voltage: 12V or 24V DC
• Monitoring capacity with included sensors: 4 tires
• 3-Year warranty

While on the road, it is very important to regularly maintain your tires and make sure they're inflated correctly. If your tires are underinflated or overinflated, they'll develop irregular tread wear and become prone to overheating and blowing out. The TireMinder Smart TPMS helps protect your investment and keep your family safe by monitoring your tires and alerting you of any signs of danger before disaster strikes.

4 Flow Through Sensors with Bluetooth

This TPMS includes 4 flow through sensors that let you individually monitor each tire on your application for changes in pressure and temperature. The flow through design allows you to inflate or deflate your tires without having to remove the sensors. These sensors are able to work on rubber, steel, chrome, or nickel valve stems. Every 6 seconds, they will check the pressure and temperature again, and use Bluetooth to send that information directly to your smartphone app.

Simple Setup with App

The TireMinder 2.0 app is free to download and use. For Apple smartphones and devices, it's compatible with models iPhone 7 and iPad 7 and newer. Apple users can connect to Apple CarPlay to display the details of your tire on your car's dashboard. For Android smartphones, it's compatible with model Android 4.4 and newer. When using the app you will need to have the Bluetooth adapter in operation within 10 feet, as it is crucial for helping to bridge the transmission between the sensors and your phone.

The smartphone app will provide you with visual and audible cues to warn you of dangerous changes in tire pressure and tire temperature, as well as alert you of changes with the monitor battery, sensor battery, and sensor signal. And even if your smartphone battery dies, the Bluetooth adapter will still continue to provide you with those alerts. Before you begin setup, make sure the Bluetooth adapter has been charged and all batteries have been installed. Then download the app on your smartphone and connect to Bluetooth.

Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the app. With the purchase of additional sensors (TM66FR - sold separately), you can monitor up to 22 tires on 8 different vehicles, which is perfect for a fleet. Sensors can be added, moved, deleted, or replaced at any point, even after initial installation.

You can set the tire pressure in psi, Bar, and KPa. If you choose psi, you can set the tire pressure anywhere from 0 psi to 199 psi. As for the temperature, you're able to switch between degrees F and degrees C, and the system will alert you if the temperature exceeds 167 degrees F. With the app, you are also able to disconnect and reconnect to different vehicles, RVs, or trailers. This is useful for those who switch between different applications, such as a Class A motorhome owner who sometimes tows a car.

RHINO Repeater Boosts Signal

This repeater helps improve signal strength and range of the sensors. It has dual Hi-Db antennas that let the booster cut through signal interference coming from wireless electronic devices used in surrounding automobiles. It also ensures that the link from the sensors to the Bluetooth adapter is strong and continuous. The unit has a green light on the front panel to indicate it has power and a blue light that blinks when it transmits a signal.

Easy Installation

This TPMS system includes batteries, locking nuts, O-rings, a wrench, and an adhesive. Once the batteries have been inserted, thread the locking nuts onto the valve stems, and install the sensors. Lastly, secure the locknuts against the sensors with the wrench.

The weatherproof and dustproof Bluetooth repeater can be installed anywhere on the exterior of your RV or trailer between the rear axle and king pin. The optimal mounting location for a towable camper is toward the front whereas the optimal mounting location for a drivable RV is toward the rear. it is not recommended to install the repeater inside your vehicle, as you might experience signal blockage. Use either the adhesive (included) or hardware (not included) to attach the repeater and wire it to a power supply line. In order to reduce vibration, make sure it's securely mounted. Then connect the black wire to ground, and the red wire to power.

TM22159 Tire Minder RV Tire Pressure Monitoring System for Smartphone - 4 Flow Through Transmitters - Bluetooth

Model number: TPMS-APP-4FT