Filter Products
Filter Results
$97.99 - $228.09
$215.25 - $579.00
$329.00 - $663.00
$479.00 - $699.00
Filter by Number of Sensors
$97.99 - $228.09
$215.25 - $579.00
$329.00 - $663.00
$479.00 - $699.00
Videos
for TPMS Sensor
Help Articles
for TPMS Sensor
Expert Answers
for TPMS Sensor
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want…
view full answer...Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you…
view full answer...The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.
view full answer...Hey John, the Tire Linc One Control part #LC37VR would be a great option to allow you to monitor the Wrangler's tire pressure while it's being flat towed. This…
view full answer...Tireminder recommends installing the signal booster like what comes with the part #TM89FR close to the middle of the towing rig and as far to the outside as possible. So for a fifth wheel trailer setup…
view full answer...We have two really great options for monitoring 10 motorhome and trailer tire pressures with the part #TM56FR which comes with its own monitor or the #TM79FR which syncs to your smart phone and displays the pressures of all tires on your phone…
view full answer...If one of the sensors in your TST TPMS #TST-507-INT-6-C is randomly turning off/on and only reading 1 or 00 for the tire pressure that leads me to believe the battery is dying and not allowing the sensor to properly operate. The batteries are…
view full answer...According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…
view full answer...According to TST, once the repeater is installed, the sensors included with the #TST-507-INT-6-C will work within 5 minutes. My representative tells me that the expected battery life is 3-5 years, and once the battery goes dead, the sensor itself…
view full answer...The tire pressures called for either by the Chassis, RV or Tire manufacturer are the cold inflated tire pressures. There is no need to adjust the tire pressures while you drive unless you are travelling very long distances and in different…
view full answer...To replace the batteries of the TPMS Cap sensors included with the TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors #TST-507-RV-6-C you will need to use the included wrench to turn the nut on the sensor counter clockwise. That…
view full answer...No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs…
view full answer...Videos
for TPMS Sensor
Help Articles
for TPMS Sensor
Expert Answers
for TPMS Sensor
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd…
view full answer...Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you…
view full answer...The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.
view full answer...Hey John, the Tire Linc One Control part #LC37VR would be a great option to allow you to monitor the Wrangler's tire pressure while it's being flat towed.…
view full answer...Tireminder recommends installing the signal booster like what comes with the part #TM89FR close to the middle of the towing rig and as far to the outside as possible. So for a fifth wheel trailer setup…
view full answer...We have two really great options for monitoring 10 motorhome and trailer tire pressures with the part #TM56FR which comes with its own monitor or the #TM79FR which syncs to your smart phone and displays the pressures of all tires on your phone…
view full answer...If one of the sensors in your TST TPMS #TST-507-INT-6-C is randomly turning off/on and only reading 1 or 00 for the tire pressure that leads me to believe the battery is dying and not allowing the sensor to properly operate. The batteries are…
view full answer...According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…
view full answer...According to TST, once the repeater is installed, the sensors included with the #TST-507-INT-6-C will work within 5 minutes. My representative tells me that the expected battery life is 3-5 years, and once the battery goes dead, the sensor itself…
view full answer...The tire pressures called for either by the Chassis, RV or Tire manufacturer are the cold inflated tire pressures. There is no need to adjust the tire pressures while you drive unless you are travelling very long distances and in different…
view full answer...To replace the batteries of the TPMS Cap sensors included with the TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors #TST-507-RV-6-C you will need to use the included wrench to turn the nut on the sensor counter clockwise. That…
view full answer...No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs…
view full answer...