Spare Tire Carrier - Horse Trailer
(51 reviews)
Price: $48.17
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (51)
- Q & A (0)
- Videos (1)
- Photos
Redline Spare Tire Carrier - 413200
- Gooseneck Mount
- 5-Bolt
- 6-Bolt
- 8-Bolt
- Trailer
- Redline
Spare tire carrier commonly used on horse and livestock trailers. The carrier is normally welded above the trailer's gooseneck.
- Unfinished raw steel
- Fits wheels with 5, 6, and 8 bolts
- Hardware to attach wheel to carrier is not included
8650 Spare Tire Carrier - Horse Trailer
Video of Spare Tire Carrier - Horse Trailer
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Spare Tire Carrier - Gooseneck Mount - 413200 Review
Today we're going to be taking a look at part number 413200. This is the Spare Tire Carrier. This is commonly used on horse and livestock trailers, but it can be applied to many different applications. It is a weld-on installation. It's got a nice, solid steel construction with a raw finish so it doesn't require much prep work when you are ready to install it on to your application. Now the carrier is normally welded above the trailer's gooseneck.
It is designed to fit wheels with 5, 6, and 8 lugs. You can see here it's got the numerous mounting patterns. Now it does not come with any hardware. What we're going to recommend is using some half inch diameter bolts. You want to make sure they're long enough to go through your wheel as well.
The bolts are going to install from the backside. They're going to go through, they would extend out, and then you would place your wheel on, and then you would need to place on some nuts on the other side of those bolts. I'm going to recommend using at least 3 bolts to securely and safely hold your spare tire onto this unit. Again, solid steel. We're going to go over some measurements real quick and then I'll explain what this piece is right here. Overall measurement, outside edge to outside edge, is going to be 12-11/16 of an inch.
The inside width from this point here to this point here is about 10-1/2 inches. Going this direction, outside edge to outside edge, we're looking about 6 inches. Taking the measurement from the bottom to the top of the pin, 9-1/8. Bottom to the top of this portion here, we're looking about 7-1/8 of an inch. Now the way this works is this would simply weld on to your trailer.
We got the nice little wings out here so that's going to allow you to easily weld this on. You would already have your bolts installed through the half inch diameter holes. Again, I'm going to recommend at least 3 of them. Then what you would do is you would place your spare tire over the pin here, thread on the nuts with how many bolts you have installed, place this over the pin and then the pin is going to feature a 5/16 inch diameter hole. That way you can install a padlock and lock your spare tire on to the carrier. That's going to do it for our review of part number 413200. This is the Spare Tire Carrier. Again, solid steel construction with a nice raw steel finish. .
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Spare Tire Carrier - Horse Trailer - 413200
Average Customer Rating: 4.5 out of 5 stars (51 Customer Reviews)
by: Boyd10/30/2017
Great product, I bough it to mount my spare tire on a small utility trailer. I welded two pieces of angle iron to the tongue than the tire carrier to the angle iron. The carrier is very sturdy and a very simple design. The locking piece is simple and effective. Overall a great price for a great product.
by: Marc09/07/2018
This was the best spare tire carrier that I could find on the web and the most affordable. I welded it on the side of my dump trailer and painted it black to match. I did have to drill the lock hole a little larger for my padlock to fit but, other than that I've been extremely satisfied with it. It's strong, sturdy and looks good.
by: Todd11/09/2023
Haven't welded it on yet as it needs an inside truss and wrench holder.
by: Roger 09/19/2022
Its just a spare tire holder, but better then most. Strong and lockable with your pad lock. Way better then the bolt to secure the tire. Difficult to steal the tire. Painted before install . I glued the tire mount bolts to the back-side to make it easy to set the tire with out the bolt falling out. Held in place with 2 spare lug nuts It is bolted to the trailer frame ( no weld on ALUM trailer) A good tire mount.
by: Terrell05/26/2016
Great product and welded easily on to trailer. I would recommend this product to anyone wanting a side mount spare tire.
by: Clay01/02/2019
Disappointing - bought for 8 lug - 6.5 and the holes don't line up properly and the wheel is off center and secure on only one side when mounted to the bracket.
Heather A.
1/16/2019
I called our contact at redline. To use this spare tire carrier with a 8 lug wheel you will need to use two bolts on the side of the carrier. The wheel will not span the entire carrier. As long as you use the two bolts it is safe to use.
by: Gl11/23/2022
Solved the problem with where to put the second spare tire on my stock trailer. Be much better if the center pin was threaded.
by: Cheri 04/14/2021
My husband got this to mount a spare tire on his 69 VW Bug. It has worked out great! The mount is as described and was an easy mount!
Cheri
4/15/2022
Still holding up, works great!
by: Kevin04/29/2018
The quality is as stated, the only problem I found was the lug pattern didn't work with a 5 x .5.5" pattern wheels that are on my International Scout ii w/ Dana 44's. The drilled patterns are obviously for trailer wheel patterns not automotive. I simply lined up one hole that worked and turned the bracket until I could get 2 other holes to drill. Problem solved.
by: Richard01/31/2018
Good product. Overall, it's a nicely made carrier that's plenty heavy enough to carry any trailer spare if mounted properly. I would improve this tire carrier by slightly increasing width of the base legs so that mounting holes could then be added for those of us that might want to bolt the mount on the trailer instead of welding it on. It would certainly add to the versatility of an already good mount.
by: Steve B06/26/2014
I found this to be excellent product!! Not only could I put it where I wanted but it had all the wholes needed to hold my boat trailer tire for me without having to drill them myself. I bought the tire nut lock which I found not necessary because the unit has a very good lock system already built on it. Good quality steel and it will last longer than the boat will. THX Steve
by: john W02/04/2016
I'm not sure about what this has to do with horse trailer spare tire carrier, but the unit looks good and stout. Bolt pattern for 5 on 5" didn't really line up. Not a problem as I drilled and taped it for my lug pattern. It'll be great for mounting spare tire on the side of my car trailer.
by: Grant09/02/2017
There is nothing wrong with the product, but it does not fit an 8-hole wheel. At least not mine. My application is a 1986 Chevy S-20 Scottsdale with 16 inch wheels............... and 8 holes. The bracket holes do not match up. I will probably file out 2 holes on the mount to allow 2 bolts to hold the wheel/tire in place.
Overall, the service was fine, just the product was not quite as advertised.
by: David A.06/13/2015
Awfully good quality for this low price. Could not have asked for a better product for the money spent. Very satisfied with this product. Having my trailer modified for my new motorcycle. This spare tire carrier will work out nicely.
Dave
by: Paul Smith04/17/2017
I have used several parts from etrailer over the years, and have never had any problem. they handle only the best quality and I can get hard to find products sent quickly and easily right to my house. I could not recommend a company more highly than etrailer.
by: Kevin09/26/2016
I purchased a Ford Transit and installed a lift gate. The spare tire needed to be relocated. This worked great! Mounted it on the inside.
by: Gary W.12/12/2016
This basic but strong spare tire mount is perfect for the outside of my toy hauler ramp door. I had it powdercoated for durability.
by: Gorignak05/30/2015
Great mount for the $$$$ I wish they offered these in 2 different depths for larger and smaller tires. I'll get a second one next order.
Folks....this company is in the top 5% of internet companies to deal with. Superlative on all fronts...VALUE, selection, information, shipping$$, shipping speed, customer service......Oh, did I mention VALUE. They have all my business.
Jeeeez....I wish the rest of the world was like these folks.
by: Rick L.05/08/2017
What a great customer service experience!
Both Pat and Angela provided info on the parts i needed.
I will be ordering from etrailer again!
by: Gina S.03/31/2017
Item exactly as described. Going to use it for the spare tire for my horse trailer.
by: JT08/11/2016
Excellent heavy duty construction adaptable to countless situations by welding. I am welding it to a flat plate then welding the plate to the front of my trailer. Thank you etrailer for another great product, expidient delivery & excellent service!
by: Jerry03/19/2017
Did not use this, it would not work on the trailer i have, built well though, and if it would fit, would have used it
by: Bernard05/03/2019
Not really happy with carrier but was the design I needed for my purpose. No lug bolts to hold spare tire on. Didn't know it was raw steel. I will have to paint or power coat. Just extra cost but like I said it was the design I needed.
by: Harvey09/06/2021
The unit is not manufactured well. It does not sit flat and I had to drill a third hole that was not in the proper place.
25
51
Show More Reviews
See what our Experts say about this Redline Spare Tire Carrier
- External Spare Tire Carrier for an Enclosed Cargo TrailerMounting a spare tire carrier, like # 413200 to the outside of an enclosed trailer can be done. You will just want to be absolutely sure the carrier and the tire are both secure. I would secure it by adding braces on the inside of the trailer going horizontal to the frame. Then fasten the carrier through the trailer's wall to these braces. The tire attaches to the carrier using wheel bolts and lug nuts.
view full answer... - Can Rack'em E-Track Spare Tire Mount be Used on the Exterior of a TrailerTechnically you could mount E-track on the exterior of your trailer and use spare tire carrier # RA-16HST. However, it is really best used on the interior of the trailer since the carrier is not a permanent attachment. If there isn't any free space on the frame to mount a carrier such as # FHDSTC0101 then I recommend welding on carrier # 413200 which is normally seen on gooseneck trailers.
view full answer...
- Recommended Spare Tire Carrier To Mount On Angle Iron The spare tire carrier I recommend that can be mounted to your trailer angle iron is the Redline Spare Tire Carrier, part # 413200. This is a weld-on installation so you can mount it to your trailer in an location you have the room. This carrier works with 5, 6, and 8-lug wheels.
view full answer... - Will the Spare Tire Carrier # 413200 fit a Wheel with a 5-1/2 inch Bolt PatternYes, the Spare Tire Carrier # 413200 that you referenced has been confirmed to fit 5 and 6 lug wheel bolt patterns so it should do just fine on yours that has either a 5 on 5-1/2 inch or 6 on 5-1/2 inch bolt pattern. I attached an FAQ on determining bolt patterns for you to check out as well.
view full answer... - Weld On Spare Wheel/Tire Carrier Recommendation for Trailer Frame 5.5 Inches WideOnly solution we'd have is a weld on spare wheel carrier like the Redline part # 413200 as your trailer frame is wider than what any of our bolt on style carriers will fit. I attached a picture that shows what this carrier looks like when welded to a frame.
view full answer...
- Solution for Mounting Spare Wheel and Tire on Camper Bumper that is 1 inch Wide by 3.5 inch TallThe only solution we'd have would be a weld on application like the part # 413200 since none of our bolt on carriers will fit bumpers with the same dimensions as yours.
view full answer... - Will Spare Tire Carrier part # 413200 work on 8 Lug Wheel part # AM20766Yes, the spare wheel carrier part # 413200 that you referenced is confirmed to work on 8 lug wheels like the part # AM20766.
view full answer... - Recommended Nuts and Bolts to Install a Wheel onto the Redline Spare Tire Carrier part # 413200I would get a 1/2 inch diameter bolt about 2 inches long with a matching nut to secure your wheel to the Spare Tire Carrier # 413200. This carrier will work with wheels that have 6 on 5-1/2 inch bolt pattern.
view full answer... - Will Weld-on Spare Tire Carrier Fit on an Aluma Salt ShieldSpare tire carrier # 413200 is normally installed on gooseneck trailers and welded into place. But you could use it on your Aluma Salt Shield provided that the surface it is mounted to can support the weight of the spare. Any welding should be performed by a qualified professional welder.
view full answer... - Hub Recommendation for 3,500 lb Axle with 5 on 4-1/2 inch Bolt PatternThe three parts you mentioned are compatible with each other. The spare tire carrier part # 413200 can have 5 lug wheels attached to it like the Dexstar Steel Mini Mod Trailer Wheel # AM20537 which will fit the trailer hub part # 84545UC1-EZ. The hub does come with a double lip seal but it does not come with a cotter pin or spindle nut. Since it sounds like you have an EZ lube spindle you would want the part # RG05-100 for a spindle nut kit that includes a tang washer.
view full answer... - Spare Tire Carrier Recommendation that Can Attach to Side of Enclosed Cargo TrailerYes, If you have an enclosed utility trailer, you could bolt on the spare tire carrier, # 413200, to the side provided that you were to re-enforce the area where the carrier is to be mounted. You can do this by attaching wood cross braces inside the trailer between vertical frame posts. Then, when you bolt the carrier to the outside, you would bolt it through the side of the trailer and into the wood cross braces. You will have to drill holes in the carrier in order to bolt it into place.
view full answer...
- Will the Spare Tire Carrier Part # 413200 Mount On The Side of a Carson 5 x 10 Utility TrailerYes, If you have an enclosed utility trailer, you could bolt on the spare tire carrier, # 413200, to the side provided that you were to re-enforce the area where the carrier is to be mounted. You can do this by attaching wood cross braces inside the trailer between vertical frame posts. Then, when you bolt the carrier to the outside, you would bolt it through the side of the trailer and into the wood cross braces. You will have to drill holes in the carrier in order to bolt it into place. If...
view full answer...
- Recommended Spare Tire Carrier For 4-Horse TrailerWe have a couple different style spare tire carriers. The most common for a horse trailer is the Weld-on Spare Tire carrier, part # 413200. Since this is welded on for installation it can be installed any place you wish as long as you have the room. I have attached a product review video you can check out. Another style carrier we offer is a frame mount carrier like part # CE27310G. This will work with 4, and 5 lug wheels. It will not work with a 5 on 5 or 5 on 5-1/2 bolt pattern however....
view full answer... - Recommendation for a Spare Trailer Tire Mount for a 6 Lug Trailer Wheel and TireWe have three different spare tire carriers that will accommodate 6 lug wheels. The first is the Fulton High Mount spare tire carrier, FHDSTC0101. It fits wheels up to 16-1/2 inches in diameter. It is for 3 inch by 5 inch trailer tongues and has a 4-3/4 inch lift. But the weight capacity is only 45 pounds so keep that in mind. The second is a Bumper Mount Spare Tire Carrier, # TR-1. This is designed for 4 inch box bumpers and is 18 inches high. Finally, we have a spare tire carrier...
view full answer... - Recommended Spare Tire Carrier For 8-Bolt WheelsI have a different style spare tire carrier for you, but there is not a version of the Erickson Spare Trailer Tire Bracket Kit # EM77316 you were looking at that is compatible with 8-bolt wheels. Instead you will need the Spare Tire Carrier # 413200 which is compatible like 8 bolt wheels like you were wanting, and can either be welded to the metal frame of your trailer, or can be bolted on as long as it is attached to a very secure section of the trailer. It may be necessary to reinforce...
view full answer... - How Much Does the Horse Trailer Spare Tire Carrier WeighThe spare tire carrier, part # 413200, is pretty light at about 5 pounds or so. It fits 5, 6, and 8 lug wheels.
view full answer... - What Are Dimensions of Redline Spare Tire Carrier # 413200I walked out to our warehouse and measured the Redline Spare Tire Carrier # 413200. I took some pictures of part # 413200 and added some dimensions to the pictures for you. Click on the pictures to see the dimensions of the Redline Spare Tire Carrier # 413200.
view full answer...
- Recommendation for a Winch to Load a Harley Davidson Motorcycle into a Cargo TrailerYou would need to consult a qualified welder to have a mount fabricated that will allow you rotate the handle 360 degrees on a hand winch. We do not stock any bolt on parts that are heavy enough to be used to mount a winch safely in this case, and you would need to tie the mount into the trailer frame for stability. We have a Universal Hand Winch Right Angle Mounting Bracket, item # DL24110, which would make the fabrication of the raised mount easier. An option I would look at, would be...
view full answer... - Recommended Spare Tire Holder for 2020 Thor Four Winds 22BThe Bumper Mounted Tire Carrier - U-Bolt Mount # TR-1 is only for tires without the deep offset. There isn't a bumper mounted option spare carrier, but the Lippert Components RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041, the Buyers Products Spare Tire Carrier # 3375201010, weld-on Spare Tire Carrier - Horse Trailer # 413200, and hitch mount carrier # RM-195125 are your options. The Roadmaster is the most popular for applications like yours but requires a trailer hitch...
view full answer...
- Offset Dimension from Mounting Surface of Horse Trailer Redline Trailer Spare Tire Carrier 413200From the surface of the Spare Tire Carrier part # 413200 where it mounts to a trailer to where a spare tire would mount measures 7-1/8 inches. I attached a picture that has a few more dimensions for this carrier for you to check out as well.
view full answer...
- What Hardware Is Needed to Mount Wheel to Redline Spare Tire Carrier # 413200The recommended hardware to use with the Spare Tire Carrier # 413200 is 1/2 inch diameter nuts and bolts long enough to fit through the back of the mounting plate and through the wheel flange. This would easily work to carry a 15 inch wheel that has a 5 on 5 inch bolt pattern too.
view full answer... - Bolt Hole Diameter of the Redline Spare Tire Carrier The Redline Spare Tire Carrier - Horse Trailer item # 413200 has 1/2" bolt holes that fit a standard lug stud.
view full answer... - Recommendation of a Spare Tire Carrier for Inside a Cargo TrailerI would recommend the Rack Em Spare Tire Rack for Enclosed Trailers, item # RA-16. This rack will allow you to hang the spare tire on the wall of the trailer and additional holders, item # RA-16HST, can be added to carry another tire below the first or other items. The Spare Tire Carrier - Horse Trailer, item # 413200, is designed as an external weld on application.
view full answer...
Do you have a question about this Spare Tire Carrier?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Cole B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Boyd S.
10/30/2018
After a year it is still good as new.